Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC585MS8G / 585MS8GE v01.0907 MIXERS - HIGH IP3 - SMT 9 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Typical Applications Features The HMC585MS8G / HMC585MS8GE are ideal for: High Input IP3: +33 dBm * Basestations & Repeaters Conversion Loss: 9 dB * GSM, GPRS & EDGE Low LO Drive: -2 to +4 dBm * CDMA & W-CDMA Single Supply: +5V @ 50 mA * Cable Modem Termination Systems Compact MSOP Package: 14.8mm2 Functional Diagram General Description The HMC585MS8G & HMC585MS8GE are high dynamic range passive MMIC mixers with integrated LO amplifiers in plastic surface mount 8 lead Mini Small Outline Packages (MSOP) covering an RF range of 400 MHz to 650 MHz. The LO range of 300 MHz to 750 MHz supports both high side and low side LO applications. Excellent input IP3 performance of +33 dBm for down conversion and +27 dBm for up conversion is provided for 2.5G & 3G applications at an LO drive of 0 dBm. RF conversion loss is 9 dB typical. The DC to 250 MHz IF frequency response will satisfy a wide range of Tx and Rx frequency plans. Electrical Specifi cations, TA = +25C, LO = 0 dBm, IF = 50 MHz*, Vdd= 5V Parameter Min. Frequency Range, RF Typ. Max. MHz Frequency Range, LO 300 - 750 MHz Frequency Range, IF DC - 0.25 Conversion Loss 9.0 LO to RF Isolation GHz 11 7 dB dB LO to IF Isolation 10 15 dB IP3 (Input) 30 33 dBm 22 dBm -2 to +4 dBm 50 mA 1 dB Gain Compression (Input) LO Input Drive Level (Typical) Supply Current *Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. 9 - 356 Units 400 - 650 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Conversion Gain vs. Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm 10 0 ISOLATION (dB) CONVERSION GAIN (dB) 0 -5 -10 +25C +85C -40C -15 -10 -20 -30 9 RF TO IF LO TO RF LO TO IF -40 -20 -25 0.37 0.42 0.47 0.52 0.57 0.62 -60 0.37 0.67 0.42 RF FREQUENCY (GHz) -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 0 -10 -25 0.37 -4dBm -2dBm 0dBm +2dBm +4dBm 0.42 0.47 0.52 0.57 0.62 0.67 0.75 0.85 LO RF -10 -15 -20 0.62 -25 0.25 0.67 0.35 RF FREQUENCY (GHz) 0.45 0.55 0.65 FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = 0 dBm IF Bandwidth @ LO = 0 dBm 0 0 -5 RETURN LOSS CONVERSION GAIN -5 RESPONSE (dB) CONVERSION GAIN (dB) 0.57 Return Loss @ LO = 0 dBm 0 -20 0.52 RF FREQUENCY (GHz) Conversion Gain vs. LO Drive -15 0.47 MIXERS - HIGH IP3 - SMT -50 -10 -15 -10 -15 -20 -25 0.37 -20 0.42 0.47 0.52 0.57 RF FREQUENCY (GHz) 0.62 0.67 0 0.05 0.1 0.15 0.2 0.25 IF FREQUENCY (GHz) Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 357 HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Input IP3 vs. LO Drive 40 35 35 INPUT IP3 (dBm) 40 30 + 25C - 40C + 85C 25 20 0.37 0.42 0.47 0.52 0.57 30 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 25 0.62 20 0.37 0.67 0.42 RF FREQUENCY (GHz) + 25C - 40C + 85C 0.62 0.67 0.62 0.67 0.62 0.67 INPUT IP3 (dBm) 35 35 30 30 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 25 0.42 0.47 0.52 0.57 0.62 20 0.37 0.67 0.42 RF FREQUENCY (GHz) 0.47 0.52 0.57 RF FREQUENCY (GHz) Input P1dB vs. Temperature @ LO= 0 dBm Upconverter IP3 vs. LO Drive, IF= 50 MHz 30 40 + 25C + 85C - 40C 35 INPUT IP3 (dBm) 28 INPUT IP3 (dBm) 0.57 40 40 26 24 22 20 0.37 0.52 Input IP2 vs. LO Drive 45 25 0.37 0.47 RF FREQUENCY (GHz) Input IP2 vs. Temperature @ LO= 0 dBm INPUT IP2 (dBm) MIXERS - HIGH IP3 - SMT 9 INPUT IP3 (dBm) Input IP3 vs. Temperature @ LO= 0 dBm 30 25 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 20 0.42 0.47 0.52 0.57 RF FREQUENCY (GHz) 0.62 0.67 15 0.37 0.42 0.47 0.52 0.57 RF FREQUENCY (GHz) Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. 9 - 358 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Input IP3 vs. LO Drive, IF= 150 MHz 40 35 35 30 INPUT IP3 (dBm) INPUT IP3 (dBm) Input IP3 vs. LO Drive, IF= 100 MHz 30 25 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 20 15 0.37 0.42 0.47 25 LO = -4dBm LO = -2dBm LO = 0dBm LO = +2dBm LO = +4dBm 15 0.52 0.57 0.62 10 0.37 0.67 0.42 RF FREQUENCY (GHz) 0.52 0.57 0.62 0.67 0.62 0.67 Conversion Gain vs. LO Drive, IF= 200 MHz 0 35 CONVERSION GAIN (dB) 30 INPUT IP3 (dBm) 0.47 RF FREQUENCY (GHz) Input IP3 vs. LO Drive, IF= 200 MHz 25 20 15 LO = LO = LO = LO = LO = 10 5 0.37 9 20 0.42 0.47 0.52 -4dBm -2dBm 0dBm +2dBm +4dBm 0.57 RF FREQUENCY (GHz) 0.62 0.67 -5 -10 -15 -4dBm -2dBm 0dBm +2dBm +4dBm -20 -25 0.37 0.42 0.47 0.52 0.57 MIXERS - HIGH IP3 - SMT v01.0907 RF FREQUENCY (GHz) Unless otherwise noted, all measurements performed as a downconverter, with high side LO & IF = 50 MHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 359 HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz MxN Spurious Outputs Harmonics of LO nLO MIXERS - HIGH IP3 - SMT 9 9 - 360 mRF 0 1 2 0 xx -4 26 1 5 0 27 2 61 63 50 3 20 24 22 4 7 8 -1 RF Freq = 0.5 GHz @ -10 dBm LO Freq = 0.4 GHz @ 0 dBm All values in dBc below IF power level (RF - LO). nLO Spur at RF Port 3 4 LO Freq GHz 1 2 -1 8 22 24 50 27 26 -4 3 4 0.3 17 36 31 39 0.4 10 40 20 33 63 0.5 6 32 18 31 0 0.6 6 34 23 33 0.7 6 28 34 41 0.8 6 26 48 xx LO power = 0 dBm All values in dBc below input LO level measured at RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Absolute Maximum Ratings RF/IF Input +27 dBm LO Drive +10 dBm +7 Vdc Channel Temperature 150 C Continuous Pdiss (T = 85C) (Derate 13.2 mW/C above 85C) 0.85 W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C IF DC Current 40 mA 9 MIXERS - HIGH IP3 - SMT Bias Supply (Vdd) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC585MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC585MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H585 XXXX [2] H585 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 361 HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Pin Descriptions MIXERS - HIGH IP3 - SMT 9 9 - 362 Pin Number Function Description 1 LO This pin is AC coupled and matched to 50 Ohm. 2 N/C Not connected. 3, 6, 7 GND This pin must be connected to RF ground. 4 Vdd Power supply for LO amplifier. An external RF bypass capacitor is required. 5 IF Port This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor. Choose value of capacitor to pass IF frequency desired. For operation to DC, this pin must not sink/source more than 40 mA of current or failure may result. 8 RF Port This pin is DC coupled and matched to 50 Ohm. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC585MS8G / 585MS8GE v01.0907 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz Evaluation PCB MIXERS - HIGH IP3 - SMT 9 List of Materials for Evaluation PCB 114445 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J5 DC Pin C1 10,000 pF Chip Capacitor, 0603 Pkg. U1 HMC585MS8G / HMC585MS8GE Mixer PCB [2] 104813 Evaluation Board, 1.0" x 1.0" [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 363