Film Chip Capacitors Catalogue CONTENTS Page General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product code system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Typical graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test method and performance . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Capacitance and voltage range - size table . . . . . . . . . . . . . . . . 6-8 Max. voltage (Vr.m.s.) and current (Ir.m.s.) vs. frequency . . . 9-10 Mounting and soldering ............................... 11 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Although the text of this publication is accurate to the best of our knowledge when printed, we reserve the right to make changes without prior notice. Other catalogues and brochures: S S S S S Film Capacitors Catalogue Film Capacitors for Lighting Film Capacitors for Automotive Capacitors for Power Electronics Capacitors for A.C. Motor applications S Capacitors and Equipment for Power Factor Correction applications S S S EMI-RFI Filters Aluminum Electrolytic Capacitors Nissei Film Capacitors Film Chip capacitor LDE series GENERAL INFORMATION Description Film Chip capacitor using: S Non-encapsulated construction. S Stacked technology. S Metallized PolyEthylene Naphtalate (PEN) and/or Metallized PolyEthylene Terephtalate high temperature (PET H.T.). PEN and PET belong to the same family: Polyester film. Application per Market sector S Telecom (Mobile phone, Mini link, XDSL, Multiplexer, Base station, Public and private switching system). S Hi-Fi. S Automotive (Engine control system, Safety system, Car radio, Navigation system, Air-conditioning). S Industrial. S DC/ DC converter, SMPS. S Consumer Advantage S Stability versus temperature, frequency, voltage, time and humidity. S Reliability, self-healing and typical failure mode at the end of the life: open. S No cracking. S No piezoelectric effect.. S Low noise level. S Low ESR. S Non-polar construction. S Environmentally friendly. Film Chip capacitor is complementary to MLC and Tantalum capacitors for professional and critical application. 2 LDE Series PEN -- PET H.T. Code example: PRODUCT CODE SYSTEM 2 3 4 5 6 7 8 9 10 11 12 13 14 L D E -- -- -- -- -- -- -- -- -- -- -- 3 4 E C 5 6 D 3 7 4 8 9 10 11 12 13 14 7 0 J A 5 N -- Series Rated voltage (C = 50Vdc) Size code (D = 22.20) Capacitance = 0.47mF Tolerance (J = 5%) Dielectric (A = PEN) Version (5 = standard) Packing (N= Tape) Internal use The part number, comprising 14 digits, is formed as follows: 1 1 2 L D Digit 1 to 3 Series code (L = leadless; DE = polyester family) Digit 4 d.c. or a.c. rated voltage (VR). C = 50Vdc D = 63Vdc E =100Vdc I = 250Vdc M = 400Vdc P =630Vdc Digit 5 Size code: 12.06 12.10 18.12 22.20 28.24 40.30 50.40 60.54 A B C D E F G H Digits 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 Capacitance tolerance: 5% (J); 10% (K); 20% (M) Digit 11 Dielectric (A = PEN; B = PET H.T.) Digit 12 Version (0 = miniature; 5 = standard; A to Z = special) Digit 13 Packing (Loose = M; Tape = N; A to Z = special) Digit 14 Internal use. PACKAGING S Taping and packaging characteristics H L 1.75 0.15 T W 2.0 0.05 W2 +0.1 1.5 0 BO 4.0 0.1 W P 0.1 KO W1 Tape Film Chip Chip dimensions Size code L W H max 12.06 12.10 3.2 3.2 (mm) 1.6 2.5 18.12 4.5 3.2 (mm) 1.1 1.5--2.0 1.7 2.3--2.6 2.3--2.7 3.3 4.2--4.4 3.5 4.5 5.4 3.6 4.5 5.4--5.6 3.6 4--4.5 5.5--5.7 3.6 4.5--4.9 5.5--5.7 22.20 5.7 5.1 28.24 7.1 6.1 40.30 10.2 7.6 50.40 12.7 10.2 60.54 15.2 13.7 Reel AO Packaging q.ties Tape and Reel characteristics A0 (mm) 2.00 2.90 3.50 4.00 5.40 5.40 5.40 6.60 6.60 6.60 8.40 8.40 8.60 10.90 10.90 11.00 14.40 14.40 14.40 B0 (mm) 3.60 3.60 5.10 5.30 6.20 6.20 6.20 7.90 7.90 7.90 11.00 11.00 11.00 13.50 13.50 13.50 16.00 16.00 16.00 Tape dimensions K0 W (mm) (mm) 1.30 8 2.10 8 2.00 12 2.60 12 2.90 12 3.80 12 4.90 12 3.80 16 4.60 16 5.50 16 3.80 16 4.60 16 5.80 16 3.80 24 4.70 24 5.90 24 4.30 24 5.10 24 5.80 24 P (mm) 4 4 8 8 8 8 8 8 8 8 12 12 12 12 12 12 16 16 16 T (mm) 300 300 300 300 300 400 300 400 400 300 400 400 300 400 500 400 400 500 Reel dimensions W1 W2 (mm) (mm) (mm) 180 8 12 180 8 12 12 330 16 12 330 12 330 12 16 330 12 330 16 330 16 20 330 16 330 16 330 16 20 330 16 330 24 330 24 28 330 24 330 24 330 24 28 330 24 All dimensions are in mm. In accordance with IEC 60286-3. Material used: - Carrier tape: antistatic material - Cover tape: polyester + PE - Reel: recyclable polystyrene All parts in bulk or on reel are packed in hermetically sealed moisture barrier bag (MBB). 3 Reel Loose (pcs) 3000 2250 4000 3000 3000 2250 1750 2250 1750 1500 1500 1250 1000 1500 1250 1000 1000 750 750 (pcs) 2000 2000 1500 1500 1000 1000 500 500 LDE Series PEN -- PET H.T. POLYESTER FAMILY - TYPICAL GRAPHS Capacitance change vs. temperature at 1kHz Capacitance change vs. frequency (Room temperature) Dissipation factor vs. temperature at 1kHz Dissipation factor vs. frequency (Room temperature) Time constant vs. temperature Impedance vs. frequency PEN PET H.T. 4 LDE Series PEN -- PET H.T. GENERAL TECHNICAL DATA Dielectric Plates Winding Termination Marking Climatic category PEN PET Test method Aluminium layer deposited by evaporation under vacuum. Non inductive type - Stacked technology. Three layers: Aluminium, Brass and Tin alloy. On packing only. 55/125/56 IEC 60068-1 ELECTRICAL CHARACTERISTICS Item Working temperature Rated voltage (VR) PEN PET Size range Capacitance range Capacitance values Capacitance tolerance -55 to 125 C 50Vdc - 63Vdc - 100Vdc - 250Vdc - 400Vdc - 630Vdc VC = VR up to 105 C Decreasing factor of 1.25% 1 25% per degree C for temperature from 105 to 125 C 12.06 to 60.54 28.24 to 60.54 1000pF to 4.7mF 0.082mF to 4.7mF E6 - E12 5% (J); 10% (K); 20% (M) Dissipation factor (tg) 0.8% max. Category voltage (VC) Dielectric absorption (%) 1 Surge voltage test Max pulse rise time (dv/dt) Solderability IEC 60063 Frequency: 1kHz Temperature: 255 C Frequency: 1kHz 0.5 Temperature: 255 C Voltage charge time: 1 min Voltage charge: 010Vdc for VR <100Vdc 100Vdc for VR 100Vdc Temperature: 255 C Application time: 2s 01G for C0.33mF 400 s for C>0.33mF Insulation resistance Test method 1.4 x VR 100V/ms Coverage 75% at each end-termination Dipping in solder bath at 2355 C for 3s TEST METHOD AND PERFORMANCE Test Damp heat Endurance Long term stability (after one year) Rapid change of temperature Bending Reliability Ref. MIL HDB 217 PEN PET |C/C| 7% Dissipation factor change: 5010-4 Insulation resistance: 50% of limit value |C/C| 5% Dissipation factor change: 5010-4 Insulation resistance: 50% of limit value Capacitance change: |C/C| 3% size 22.20 |C/C| 2% size > 22.20 |C/C| 3% Insulation resistance: limit value No mechanical damage tg: 5010-4 Deflection: 1 to 6 mm. No visible damage on the terminations (pealing) No damage on the body (cracking) |C/C| 1% Failure rate: 1 Fit (1 Fit = 1x10-9 failiures/componentsxhour) 5 Test conditions Temperature: Relative humidity: Duration: 402 C 93% 2% 56 days Temperature: 1255 C Duration: 2000 h Voltage: 1.25x VC Ambient conditions: - temperature: 255 C - relative humidity: 75% 1 hour at -55 C 1 hour at +125 C Changing time: 30 s Cycle: 1000 Bend the test board as shown in the test set-up: FR4 test board 1.6 mm Temperature: 40_C2_C Voltage: 0.5xVR Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change (|C/C|): >10% DF change (tg): >2xinitial limit. Insulation resistance: <0.005xinitial limit. LDE Series PEN -- PET H.T. CAPACITANCE AND VOLTAGE RANGE H L W STANDARD VERSION Size table Rated Cap. 50Vdc/40Vac 63Vdc/40Vac Qy Qty per reel H max 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 2.3 2.3 2.3 2.3 2.3 Part Number Part Number 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 mF 0.012 mF 0.015 mF 0.018 mF 0.022 mF 0.027 mF 0.033 mF 0.039 mF 0.047 mF 0.056 mF 0.068 mF 0.082 mF 0.10 mF size code 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 LDECC1100 - -5- LDECC1120 - -5- LDECC1150 - -5- LDECC1180 - -5- LDECC1220 - -5- LDECC1270 - -5- LDECC1330 - -5- LDECC1390 - -5- LDECC1470 - -5- LDECC1560 - -5- LDECC1680 - -5- LDECC1820 - -5- LDECC2100 - -5- LDECC2120 - -5- LDECC2150 - -5- LDECC2180 - -5- LDECC2220 - -5- LDECC2270 - -5- LDECC2330 - -5- LDECC2390 - -5- LDECC2470 - -5- LDECC2560 - -5- LDECC2680 - -5- LDECC2820 - -5- LDECC3100 - -5- - LDEDC1100 - -5- LDEDC1120 - -5- LDEDC1150 - -5- LDEDC1180 - -5- LDEDC1220 - -5- LDEDC1270 - -5- LDEDC1330 - -5- LDEDC1390 - -5- LDEDC1470 - -5- LDEDC1560 - -5- LDEDC1680 - -5- LDEDC1820 - -5- LDEDC2100 - -5- LDEDC2120 - -5- LDEDC2150 - -5- LDEDC2180 - -5- LDEDC2220 - -5- LDEDC2270 - -5- LDEDC2330 - -5- LDEDC2390 - -5- LDEDC2470 - -5- LDEDC2560 - -5- LDEDC2680 - -5- LDEDC2820 - -5- LDEDC3100 - -5- - 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3000 3000 3000 3000 0.12 mF 18.12 1.7 LDECC3120 - -5- - LDEDC3120 - -5- - 4000 0.15 mF 0.18 mF 0.22 mF 18.12 18.12 18.12 1.7 2.3 2.3 LDECC3150 - -5- LDECC3180 - -5- LDECC3220 - -5- - LDEDC3150 - -5- LDEDC3180 - -5- LDEDC3220 - -5- - 4000 3000 3000 0.27 mF 22.20 2.3 LDECD3270 - -5- - LDEDD3270 - -5- - 3000 0.33 mF 0.39 mF 0.47 mF 0.56 mF 0.68 mF 22.20 22.20 22.20 22.20 22.20 2.3 2.3 2.3 3.3 3.3 LDECD3330 - -5- LDECD3390 - -5- LDECD3470 - -5- LDECD3560 - -5- LDECD3680 - -5- - LDEDD3330 - -5- LDEDD3390 - -5- LDEDD3470 - -5- LDEDD3560 - -5- LDEDD3680 - -5- - 3000 3000 3000 2250 2250 0.82 mF 28.24 3.5 LDECE3820 - -5- - LDEDE3820 - -5- - 2250 1.0 mF 28.24 3.5 LDECE4100 - -5- - LDEDE4100 - -5- - 2250 1.2 mF 28.24 3.5 LDECE4120 - -5- - LDEDE4120 - -5- - 1.5 mF 50.40 3.6 LDECG4150- -5- - 1.8 mF 2.2 mF 50.40 50.40 3.6 3.6 LDECG4180- -5- LDECG4220- -5- - 2.7 mF 50.40 4.5 3.3 mF 60.54 4.5 3.9 mF 4.7 mF 60.54 60.54 4.5 4.9 100Vdc/63Vac Qy Qty per reel size code 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 H max 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 LDEEC1100 LDEEC1120 LDEEC1150 LDEEC1180 LDEEC1220 LDEEC1270 LDEEC1330 LDEEC1390 LDEEC1470 LDEEC1560 LDEEC1680 LDEEC1820 LDEEC2100 LDEEC2120 LDEEC2150 - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 1.7 1.7 1.7 1.7 1.7 2.3 2.3 2.3 LDEEC2180 LDEEC2220 LDEEC2270 LDEEC2330 LDEEC2390 LDEEC2470 LDEEC2560 LDEEC2680 - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - 4000 4000 4000 4000 4000 3000 3000 3000 18.12 18.12 22.20 2.3 2.3 2.3 LDEEC2820 - -5- LDEEC3100 - -5- LDEED3120 - -5- - 3000 3000 3000 22.20 2.3 LDEED3150 - -5- - 3000 22.20 22.20 22.20 2.3 2.3 3.3 LDEED3180 - -5- LDEED3220 - -5- LDEED3270 - -5- - 3000 3000 2250 22.20 28.24 28.24 28.24 3.3 3.5 3.5 3.5 LDEED3330 LDEEE3390 LDEEE3470 LDEEE3560 - -5- - -5- - -5- - -5- - 2250 2250 2250 2250 28.24 40.30 3.5 3.6 LDEEE3680 - -5- LDEEF3820 - -5- - 2250 1500 2250 40.30 50.40 3.6 3.6 LDEEF4100 - -5- LDEEG4120 - -5- - 1500 1500 LDEDG4150- -5- - 1500 50.40 3.6 LDEEG4150 - -5- - 1500 LDEDG4180- -5- LDEDG4220- -5- - 1500 1500 LDECG4270- -5- - LDEDG4270- -5- - 1250 50.40 50.40 60.54 3.6 3.6 4.5 LDEEG4180 - -5- LDEEG4220 - -5- LDEEH4270 - -5- - 1500 1500 750 LDECH4330 - -5- - LDEDH4330 - -5- - 750 60.54 4.5 LDEEH4330 - -5- - 750 LDECH4390 - -5- LDECH4470 - -5- - LDEDH4390 - -5- LDEDH4470 - -5- - 750 750 60.54 60.54 4.5 4.9 LDEEH4390 - -5- LDEEH4470 - -5- - 750 750 Part Number 250Vdc/120Vac Qty Q y per reel size code 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 18.12 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 28.24 28.24 H max 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.7 3.5 3.5 LDEIC1100 LDEIC1120 LDEIC1150 LDEIC1180 LDEIC1220 LDEIC1270 LDEIC1330 LDEIC1390 LDEIC1470 LDEIC1560 LDEIC1680 LDEIC1820 LDEIC2100 LDEIC2120 LDEIC2150 LDEID2180 LDEID2220 LDEID2270 LDEID2330 LDEID2390 LDEID2470 LDEID2560 LDEID2680 LDEIE2820 LDEIE3100 - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - -5- - 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3000 3000 3000 3000 3000 3000 3000 2250 2250 28.24 3.5 LDEIE3120 - -5- - 2250 28.24 40.30 40.30 3.5 3.6 3.6 LDEIE3150 - -5- LDEIF3180 - -5- LDEIF3220 - -5- - 2250 1500 1500 40.30 3.6 LDEIF3270 - -5- - 1500 40.30 50.40 50.40 50.40 60.54 3.6 3.6 3.6 4.0 4.5 LDEIF3330 - -5- LDEIG3390- -5- LDEIG3470 - -5- LDEIG3560 - -5- LDEIH3680 - -5- - 1500 1500 1500 1250 750 60.54 4.5 LDEIH3820 - -5- - 750 60.54 4.5 LDEIH4100 - -5- - 750 Part Number Tolerance: J (5%); K (10%); M (20%) Dielectric: A (PEN); B (PET H.T.) Packing: N (Tape); M (Loose) Internal use Size conversion and tolerances Size code L (mm) W (mm) 12.06 3.2 0.3 1.6 0.3 12.10 3.2 0.3 2.5 0.3 18.12 4.5 0.5 3.2 0.5 22.20 5.7 0.5 5.1 0.5 6 28.24 7.1 0.5 6.1 0.5 40.30 10.2 0.6 7.6 0.8 50.40 12.7 0.6 10.2 0.8 60.54 15.2 0.6 13.7 0.8 LDE Series PEN -- PET H.T. CAPACITANCE AND VOLTAGE RANGE H L W MINIATURE VERSION Size table Rated Cap. 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 mF 0.012 mF 0.015 mF 0.018 mF 0.022 mF 0.027 mF 0.033 mF 0.039 mF 0.047 mF 0.056 mF 0.068 mF 0.082 mF 0.10 mF 0.12 mF 0.15 mF 0.18 mF 0.22 mF 0.27 mF 0.33 mF 0.39 mF 0.47 mF 0.56 mF 0.68 mF 0.82 mF 1.0 mF 1.2 mF 1.5 mF 1.8 mF 2.2 mF 2.7 mF 3.3 mF 3.9 mF 4.7 mF size code 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.10 12.10 12.10 12.10 12.10 12.10 H max 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 2.0 2.0 2.0 2.0 2.0 2.0 50Vdc/40Vac 63Vdc/40Vac Part Number Part Number Qty y per reel LDECA1100 - -0- LDECA1120 - -0- LDECA1150 - -0- LDECA1180 - -0- LDECA1220 - -0- LDECA1270 - -0- LDECA1330 - -0- LDECA1390 - -0- LDECA1470 - -0- LDECA1560 - -0- LDECA1680 - -0- LDECA1820 - -0- LDECA2100 - -0- LDECA2120 - -0- LDECA2150 - -0- LDECA2180 - -0- LDECA2220 - -0- LDECA2270 - -0- LDECA2330 - -0- LDECB2390 - -0- LDECB2470 - -0- LDECB2560 - -0- LDECB2680 - -0- LDECB2820 - -0- LDECB3100 - -0- - LDEDA1100 - -0- LDEDA1120 - -0- LDEDA1150 - -0- LDEDA1180 - -0- LDEDA1220 - -0- LDEDA1270 - -0- LDEDA1330 - -0- LDEDA1390 - -0- LDEDA1470 - -0- LDEDA1560 - -0- LDEDA1680 - -0- LDEDA1820 - -0- LDEDA2100 - -0- LDEDA2120 - -0- LDEDA2150 - -0- LDEDA2180 - -0- LDEDA2220 - -0- LDEDA2270 - -0- LDEDA2330 - -0- LDEDB2390 - -0- LDEDB2470 - -0- LDEDB2560 - -0- LDEDB2680 - -0- LDEDB2820 - -0- LDEDB3100 - -0- - 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2250 2250 2250 2250 2250 2250 100Vdc/63Vac size code 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.06 12.10 12.10 12.10 12.10 12.10 12.10 18.12 22.20 22.20 4.2 4.2 LDECD3820 - -0- LDECD4100 - -0- - LDEDD3820 - -0- LDEDD4100 - -0- - 1750 1750 28.24 28.24 28.24 40.30 40.30 40.30 50.40 4.5 5.4 5.4 4.5 5.4 5.4 4.5 LDECE4150 - -0- LDECE4180 - -0- LDECE4220 - -0- LDECF4270 - -0- LDECF4330 - -0- LDECF4390 - -0- LDECG4470- -0- - LDEDE4150 - -0- LDEDE4180 - -0- LDEDE4220 - -0- LDEDF4270 - -0- LDEDF4330 - -0- LDEDF4390 - -0- LDEDG4470- -0- - 1750 1500 1500 1250 1000 1000 1250 H max 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 2.0 2.0 2.6 Part Number LDEEA1100 LDEEA1120 LDEEA1150 LDEEA1180 LDEEA1220 LDEEA1270 LDEEA1330 LDEEA1390 LDEEA1470 LDEEA1560 LDEEA1680 LDEEA1820 LDEEA2100 LDEEA2120 LDEEA2150 LDEEB2180 LDEEB2220 LDEEB2270 LDEEB2330 LDEEB2390 LDEEB2470 - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - LDEEC3120 - -0- - Qty y per reel 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2250 2250 2250 2250 2250 2250 3000 22.20 22.20 22.20 4.2 4.2 4.4 LDEED3390 - -0- LDEED3470 - -0- LDEED3560 - -0- - 1750 1750 1750 28.24 28.24 40.30 40.30 40.30 40.30 50.40 50.40 50.40 4.5 5.4 4.5 4.5 5.4 5.6 5.5 5.5 5.7 LDEEE3820 LDEEE4100 LDEEF4120 LDEEF4150 LDEEF4180 LDEEF4220 LDEEG4270 LDEEG4330 LDEEG4390 1750 1500 1250 1250 1000 1000 1000 1000 1000 - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - -0- - 250Vdc/120Vac Qty y per reel size code H max 18.12 18.12 18.12 18.12 1.7 2.3 2.6 2.6 LDEIC2180 LDEIC2220 LDEIC2270 LDEIC2330 - -0- - -0- - -0- - -0- - 4000 3000 3000 3000 22.20 22.20 22.20 3.3 3.3 4.2 LDEID2820 - -0- LDEID3100 - -0- LDEID3120 - -0- - 2250 2250 1750 28.24 28.24 28.24 4.5 4.5 5.4 LDEIE3180 - -0- LDEIE3220 - -0- LDEIE3270 - -0- - 1750 1750 1500 40.30 40.30 40.30 50.40 50.40 4.5 5.4 5.6 4.5 5.5 LDEIF3390 LDEIF3470 LDEIF3560 LDEIG3680 LDEIG3820 - -0- - -0- - -0- - -0- - -0- - 1250 1000 1000 1250 1000 60.54 60.54 5.5 5.7 LDEIH4120 - -0- LDEIH4150 - -0- - 750 750 Part Number Tolerance: J (5%); K (10%); M (20%) Dielectric: A (PEN); B (PET H.T.) Packing: N (Tape); M (Loose) Internal use Size conversion and tolerances Size code L (mm) W (mm) 12.06 3.2 0.3 1.6 0.3 12.10 3.2 0.3 2.5 0.3 18.12 4.5 0.5 3.2 0.5 22.20 5.7 0.5 5.1 0.5 7 28.24 7.1 0.5 6.1 0.5 40.30 10.2 0.6 7.6 0.8 50.40 12.7 0.6 10.2 0.8 60.54 15.2 0.6 13.7 0.8 LDE Series PEN -- PET H.T. CAPACITANCE AND VOLTAGE RANGE H L W PEN HIGH VOLTAGE - STANDARD VERSION Size table Rated Cap. 0.010 mF 0.012 mF 0.015 mF 0.018 mF 0.022 mF 0.027 mF 0.033 mF 0.039 mF 0.047 mF 0.056 mF 0.068 mF 0.082 mF 0.10 mF 0.12 mF 0.15 mF 0.18 mF 0.22 mF 0.27 mF 0.33 mF 0.39 mF 0.47 mF 0.56 mF 400Vdc/160Vac size code 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 28.24 28.24 28.24 40.30 40.30 40.30 50.40 50.40 50.40 60.54 60.54 60.54 H max 2.3 2.3 2.3 2.3 2.3 2.3 3.3 3.3 4.2 4.2 3.5 4.5 5.4 3.6 4.5 4.5 3.6 4.5 5.5 3.6 4.5 5.5 Part Number LDEMD2100 - A5- 0 LDEMD2120 - A5- 0 LDEMD2150 - A5- 0 LDEMD2180 - A5- 0 LDEMD2220 - A5- 0 LDEMD2270 - A5- 0 LDEMD2330 - A5- 0 LDEMD2390 - A5- 0 LDEMD2470 - A5- 0 LDEMD2560 - A5- 0 LDEME2680 - A5- 0 LDEME2820 - A5- 0 LDEME3100 - A5- 0 LDEMF3120 - A5- 0 LDEMF3150 - A5- 0 LDEMF3180 - A5- 0 LDEMG3220- A5- 0 LDEMG3270- A5- 0 LDEMG3330- A5- 0 LDEMH3390 - A5- 0 LDEMH3470 - A5- 0 LDEMH3560 - A5- 0 Qty y per reel 3000 3000 3000 3000 3000 3000 2250 2250 1750 1750 2250 1750 1500 1500 1250 1250 1500 1250 1000 1000 750 750 630Vdc/200Vac size code 22.20 22.20 22.20 22.20 22.20 28.24 28.24 28.24 28.24 40.30 40.30 40.30 40.30 50.40 50.40 50.40 60.54 60.54 H max 2.3 2.3 3.3 3.3 4.2 3.5 3.5 4.5 5.4 3.6 3.6 4.5 5.4 3.6 4.5 5.5 4.5 4.5 Part Number LDEPD2100 - A5- 0 LDEPD2120 - A5- 0 LDEPD2150 - A5- 0 LDEPD2180 - A5- 0 LDEPD2220 - A5- 0 LDEPE2270 - A5- 0 LDEPE2330 - A5- 0 LDEPE2390 - A5- 0 LDEPE2470 - A5- 0 LDEPF2560 - A5- 0 LDEPF2680 - A5- 0 LDEPF2820 - A5- 0 LDEPF3100 - A5- 0 LDEPG3120 - A5- 0 LDEPG3150 - A5- 0 LDEPG3180 - A5- 0 LDEPH3220 - A5- 0 LDEPH3270 - A5- 0 Qty y per reel 3000 3000 2250 2250 1750 2250 2250 1750 1500 1500 1500 1250 1000 1500 1250 1000 750 750 Tol.:J(5%);K(10%);M(20%) Packing: N (Tape); M (Loose) Size conversion and tolerances Size code L (mm) W (mm) 12.06 3.2 0.3 1.6 0.3 12.10 3.2 0.3 2.5 0.3 18.12 4.5 0.5 3.2 0.5 22.20 5.7 0.5 5.1 0.5 8 28.24 7.1 0.5 6.1 0.5 40.30 10.2 0.6 7.6 0.8 50.40 12.7 0.6 10.2 0.8 60.54 15.2 0.6 13.7 0.8 LDE Series PEN -- PET H.T. MAX. VOLTAGE (Vr.m.s.) AND CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / *Th 85C) Measure carried out in free air condition. Note: *Th = max. ambient temperature surrounding the capacitor or hottest contact point = (i.e. tracks), whichever is higher, in the worst operation conditions in C. 9 LDE Series PEN -- PET H.T. MAX. VOLTAGE (Vr.m.s.) AND CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / *Th 85C) 400 Vdc / 160 Vac V rms [V] 1.000 100 0.47F 0.1 F 0.047 F 0.01 F 1 0.01 0.047 0.1 0.47 10 400 Vdc / 160 Vac I rms [A] 10 F F F F 0.1 1 0.01 0.1 1 V rms [V] 1.000 10 f [kHz] 100 1000 0.1 1 I rms [A] 10 630 Vdc / 200 Vac 0.01 0.047 0.1 0.22 10 F F F F 100 1000 100 1000 630 Vdc / 200 Vac 0.22 0.1 0.047 0.01 1 100 10 f [kHz] F F F F 0.1 1 0.01 0.1 1 10 f [kHz] 100 1000 0.1 1 10 f [kHz] Measure carried out in free air condition. Note: *Th = max. ambient temperature surrounding the capacitor or hottest contact point = (i.e. tracks), whichever is higher, in the worst operation conditions in C. 10 LDE Series PEN -- PET H.T. MOUNTING AND SOLDERING In order to reach a good solderability, we suggest these rules are followed: S Landing area Example for land dimensions Land dimensions Size A B C D 1206 1210 1812 2220 2824 4030 5040 6054 2.0 3.0 4.0 5.9 7.0 8.6 11.2 14.6 1.3 1.3 1.5 1.9 2.5 3.0 3.5 3.6 2.4 2.4 3.5 4.5 5.7 8.0 10.3 12.6 5.0 5.0 6.5 8.3 10.7 14.0 17.3 19.8 A B C D S Solder paste & quantity To obtain the best performance we advise to use a solder paste alloy TIN (Sn) - LEAD (Pb) - SILVER (Ag) (typical values 62% - 36% - 2%) of no clean type. The thickness of solder paste is also important, and from our experience we suggest the following rule: S Size Thickness [mm] from 12.06 to 22.20 0.1 to 0.15 from 28.24 to 60.54 0.1 to 0.20 Thermal profile Temperature Tmax Preheating: Temperature = 150 to 160C Time = 3 min Peak: Max time above 200C 40 to 50 s and 1 2 200C preheating 1 2 Tmax: from 12.06 to 22.20 Tmax = 225C from 28.24 to 60.54 Tmax = 235C time MOISTURE BARRIER BAG (MBB) S Materials The MBB is made by three layers: PET, Aluminium and PE for a total thickness of 105 mm S Moisture resistance From size 12.06 to 60.54 Arcotronics has tested reels inside this MBB in different extreme conditions (i.e.: T = 60C R.H. = 95% 56 days). The result is: THE CAPACITANCE DOESN'T PRESENT ANY SIGNIFICATIVE CHANGE. S Use After the opening of the MBB the permanence at a temperature 30C and R.H.60% is allowed for a maximum lapse of time of 4 weeks. For longer times and/or higher T and R.H. values, it is absolutely indispensable to protect the component against R.H. If the reel is partially used, Arcotronics recommend the re-use of the same MBB or a storage in areas with controlled temperature and humidity. S Storage The minimum MBB shelf life is 12 months. 11 LDE Series PEN -- PET H.T. CAUTION S Hand assembly S Soldering iron If PC boards are assembled by hand, care must be taken to avoid mechanical damage. We recommend: - Use tweezers, the components should be gripped across the two terminals, A. - Avoid any contact with the cut surface, C. - The usage of a pen under vacuum on the surface B is recommended. In case of hand soldering the following recommandations must be taken: - Maximum temperature: 250_C on the soldering iron. - Soldering time: 5 s max. - Avoid contact between the iron soldering and chip. S Soldering and flux recommendation - Solder: - Flux: A B S Cleaning C To clean flux from the PC board assembly, use a suitable solvent such as Isopropylalcohol. Solvents such as Toluene, Xylene and Trichloroethylene should be avoided. A C SnPb solder paste no-clean flux. A = Termination surface B B = External surface Fig. 1 C = Cut surface CORRECTIVE ACTIONS TABLE (problems after soldering process) TYPE OF DEFECT No solder joint in one end termination Mechanical deformation of the body CAUSE - see page 11 /end user - quality of solder paste - see page 11 /end user - thermal profile - see page 11 /end user - bad temperature distribution into the reflow oven - decrease time of preheating or change the orientation of P.C.B. board/end user. - too high temperature - apply suggested thermal profile (page 11) / end user - apply suggested thermal profile (page 11) / end user - see use suggestion (page 11) / end user - take care to hand assembly (page 12) / end user - too long time - moisture inside capacitor Short circuit POSSIBLE SOLUTION / ACTION - wrong landing area - mechanical damage Do not hesitate to contact our Technical Service for any doubt or more detailed information. 12