MM- Metal Film MELF Resistor Specifications Per IEC 115-1 115-2 CECC 40101 DIN 44061 Features SMD enabled structure Conformal Multi-layer Coating Against Humidity Excellent Solderability Termination 5% is 3-band coded, 1% and under is 4-band coded Dimensions Type Body Length (L) , mm Body Diameter (D) , mm Soldering spot (B) , mm Net Weight Per 1000 pcs MM16 3.45 0.1 1.35 0.1 0.6 Min. 17 grams MM204 3.45 0.1 1.35 0.1 0.6 Min. 17 grams MM207 5.90 0.2 2.20 0.1 1.0 Min. 66 grams MM52 5.90 0.2 2.20 0.1 1.0 Min. 66 grams General Specifications Type Power Rating (at 70 ) MM16 1/6W 200V 400V 0 & 0.1 1M MM204 1/4W 200V 400V 0 & 0.1 1M MM207 1/3W 300V 500V 0 & 0.1 10M MM52 1/2W Max. Max. Resistance Resistance Standard Resistance Working Overload Range Range Resistance Tolerance Voltage Voltage Min. Max. Value 300V 500V 0 & 0.1 10M 1% E-24/E-96 2%, 5% E-24 1% E-24/E-96 2%, 5% E-24 1% E-24/E-96 2%, 5% E-24 1% E-24/E-96 2%, 5% E-24 For zero-ohm jumper, resistance value is under 20 m. Rated current is 2A for MM16 & MM204, 4A for MM207 and MM52. For 1m~100m please see CSM series. Special sizes, values, and Tel: 626-962-5700, Fax: 626-962-5037 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com specifications not listed available on special order. MM- Metal Film MELF Resistor 1 .2 /5 0 u s P E A K P U L S E POWER DERATINGCURVE 5 p u ls e s a t 1 2 -s e c in te rv a l fo r 0 .5 % p e rm a n e n t c h a n g e 10000 M M -2 0 7 , M M -5 2 100% 90% 80% 70% RATED 60% LOAD 50% 40% 30% 20% 10% 0% 30 M M -1 6 , M M -2 0 4 1000 PEAK VOLTAGE (v o lt) 100 40 50 60 70 80 90 100 110 120 130 10 o AMBIENTTEMPERATURE( C) 1 10 100 1K 10K 100K 1M R E S IS T A N C E V A L U E SINGLE SURGE PERFORMANCE SURGE POW ER DERATING CURVE 100 1 0.9 MM-207, MM-52 0.8 PEAK POWER (watt) 1 0.7 0.6 Psurge 10 Papplicable - Prated MM-16, MM-204 0.5 0.4 0.3 0.2 0.1 0.1 0.00001s 10us 0.0001s 100us 0.001s 1ms 0.01s 10ms 0.1s 100ms 1s 1s SURGE DURATION 0 0.000 1 0 .001 0.0 1 0.1 Surge D uration Surge O FF tim e Notes: 1. Above graph is accurate for NON REPETITIVE applications operating in an ambient temperature of 70C or less. For temperatures above 70C, the graph power must be derated further linearly down to zero at 125C. 2. For applicable surge power in continuous-surge applications please see SURGE POWER DERATING CURVE below Tel: 626-962-5700, Fax: 626-962-5037 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com 1 10 MM- Metal Film MELF Resistor Technical Summary: Characteristics Limits Dielectric Withstanding Voltage, VAC or DC MM16, MM204: 200 MM207, MM52: 500 Temperature Coefficient, PPM / 1%, 2% 5% Operating Temperature Range, -55 ~ +125 Film Temperature, Insulation Resistance, M 50 100 MM16 MM204 MM207 MM52 125 125 125 140 >104 Performance Specifications Test Characteristics Test Conditions Limits Short Time Overload IEC 60115-1 4.13 5 seconds 2.5x rated voltage (not over max. overload voltage) (0.5%+0.05R) Load Life In Humidity IEC 60115-1 4.24 56 days at 40oC and 93% relative humidity (1.5%+0.05R) Load Life 1,000 hours IEC 60115-1 4.25.1 Rated load 1.5 hours ON, 0.5 hours OFF, at 70oC (1.5%+0.05R) Resistance To Soldering Heat IEC 60115-1 4.18 10 seconds at 260oC solder bath temperature (0.5%+0.05R) Solderability MIL-STD-202 Method 208 Solder area covered after 230+5oC/5+0.5 seconds w/ flux applied 95% Min. Vibration MIL-STD-202 Method 204 Six hours in each parallel and axial direction w/ a simple harmonic motion having an amplitude of 1.52mm and 10 to 20,000 Hz. (1%+0.1R) Thermal Endurance IEC 60115-1 4.25.3 1000 hours at 125oC without load (0.5%+0.05R) Thermal Shock IEC 60115-1 4.19 -55oC 30minutes, +125oC 30minutes, 5 cycles (0.5%+0.05R) Ordering Information Type Tolerance Temperature Coefficient Resistance Value Packaging Special Request (Optional) MM204 MM207 F (1%) G (2%) J (5%) TK50 TK100 562R 84K5 1M69 TR (Tape/Reel) LV (Low value) Tel: 626-962-5700, Fax: 626-962-5037 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com