Internal construction of RP Series
(non-inductive serpentine film)
U U U U U
U U U U U
Industry’s widest range of high value/ high voltage resistors-
1/8 ~ 20W, 1KΩ~ 1013Ω, 300V~ 90KV, TC’s to ±15ppm, ±0.05%~ 10%
Available on Tape & Reel (sizes <2.5” long)
RCD’s high voltage thick-film resistors represent the most advanced technology in the
industry. Series RG is designed for semi-precision applications, offering a low cost
solution up to 15KV. Series RH features a special composition and processing to
achieve improved tolerance, TC, & voltage (60KV). Series RP utilize highest grade
materials enabling tightest tolerances, lowest VC’s, TC’s to 15ppm, and superior
power/temp/voltage levels (90KV). RP utilize serpentine film pattern for lowest
inductance. Units are printed or banded with resistance value and tolerance as
minimum.
The ruggedness of these models enables superior long term reliability , especially in
demanding applications such as military , sp ace, and medical equipment, as well as
electron microscopes, high impedance amplifiers, electrometer, radiation testers, etc.
* Maximum working voltage is DC or AC RMS (50-60Hz sinusoidal) and is determined by E= (PR)1/2, E not to exceed value listed in column above. **Consult factory for res. values outside the standard range
OPTIONS
Options include formed leads, matched sets, custom marking, burn-in,
vacuum/space operation, custom sizes, etc. Opt. P = high pulse design,
Opt.H= increased voltage, Opt.B=increased power, Opt.58=hermetic
seal.
* Extended temperature range available ** Tinned copper leads avail. on Series RP (specify Opt.25)
DERATING
100
75
50
25
0 25 50 75 100 125 150 175 200 225
AMBIENT TEMPERA TURE (°C)
% RA TED POWER
RP
RG,RH
Increased Ratings - increased power and voltage ratings are available with
special processing. By specifying Opt.H on RG series, voltage ratings are
increased by 100% (by 50% on sizes 2W-4W).
Matched Sets and Networks - cost savings up to 50% can often be achieved
by specifying tight matching requirements instead of tight tol. and TC reqts.
Resistance matching to 0.02% and TC tracking to 5ppm is available.
Threaded Terminations - resistors are available with tapped end caps for
series combination into virtually any voltage or resis. value.
Hermetic-Sealed Construction (Opt. 58) - Available on RH1, RH2, & RH3
for use in harshest environments. Add .08” to dia. & .18” to length.
CUSTOM DESIGNS SPECIFICATIONS (T yp.)
1 RH2 is available in 400ppm TCR from 100G to 300G, 300G-600G is 1000ppm, 600G-3T is 1500ppm 2 RH3 is available in 400ppm TCR from 100G-600g, 600G-1T is 1000ppm, 1T-10T is 1500ppm
GRWegattaegatloVcirtceleiD]mm[hcnIsnoisnemiD 01=K(**egnaRecnatsiseRdradnatS
3
01=M,
6
01=G,
9
)
seireSC°52@*gnitaRhtgnertSL Ddmpp52mpp05mpp001mpp002mpp053
8/1GRW8/1V003V005]0.1±4.3[40.±431.]46.0±7.1[520.±760.]5.[020.A/NM01-M1M003-M1M003-M1M003-M1
4/1GRW4/1V005V005]0.1±5.6[40.±652.]46.0±5.2[520.±890.]6.[420.A/NM05-K001G3-K001G3-K001G3-K001
2/1GRW2/1VK1V005]0.1±4.9[40.±863.]18.0±4.3[230.±431.]46.[520.A/NM05-K001G3-K001G3-K001G3-K001
S1GRW1VK5.1V005]3.1±0.21[50.±274.]18.0±0.4[230.±851.]7.[820.A/NM05-k002M001-K002M003-K002M003-K002
1GRW1VK2VK1]3.1±8.41[50.±185.]18.0±5.5[230.±612.}8.[130.A/NM05-k002M001-K002M005-K002M005-K002
2GRW2VK5VK1]6.1±9.62[260.±60.1]18.0±0.7[230.±572.}8.[130.A/NA/N****G5.1-M1
3GRW3VK01VK1]6.1±4.24[260.±76.1]18.0±0.7[230.±572.}8.[130.A/NA/N****G5.1-M1
4GRW4VK51VK1]6.1±1.25[260.±50.2]20.1±5.8[230.±533.]1[040.A/NA/N****G5.1-M1
PRWegattaegatloVcirtceleiD]mm[hcnIsnoisnemiD 01=K(**egnaRecnatsiseRdradnatS
3
01=M,
6
01=G,
9
)
seireSC°04@*gnitaRhtgnertSL Ddmpp51mpp52mpp05mpp001mpp002
4PRW8.3VK51VK1]0.1±0.72[40.±360.1]46.±0.8[520.±513.]97.[130.G1-K1G01-K1G01-K1G01-K1G01-K1
5PRW5VK12VK1]0.1±0.73[40.±754.1]46.±0.8[520.±513.]97.[130.G1-K1G51-K1G51-K1G51-K1G51-K1
8PRW5.7VK03VK1]3.1±0.25[50.±740.2]46.±0.8[520.±513.]97.[130.G1-K1G02-K1G02-K1G02-K1G02-K1
01PRW01VK54VK1]5.1±0.87[60.±170.3]46.±0.8[520.±513.]97.[130.G1-K1G03-K1G03-K1G03-K1G03-K1
1PR4 W5.31VK06VK1]5.1±6.101[60.±000.4]46.±0.8[520.±513.]97.[130.G1-K1G04-K1G04-K1G04-K1G04-K1
61PRW61VK27VK1]5.1±9.121[60.±008.4]46.±0.8[520.±513.]97.[130.G1-K1G05-K1G05-K1G05-K1G05-K1
02PRW02VK09VK1]5.1±0.251[60.±489.5]46.±0.8[520.±513.]97.[130.G1-K1G06-K1G06-K1G06-K1G06-K1
seireSGRseireSHRseireSPR
egnaR.pmeTgnitarepO*C°551+ot55-*C°551+ot55-*C°522+ot55-
secnareloTliava%1.0,%01-%1%5-%1.0%5-%50.0
gnitaoCyxopEyxopEenociliS
ecnatcudnIwoLwoLevitcudnI-noN
)Vx5.1etn,S5,Wx5.1(daolrevO%1± ∆R%5.0± ∆R%52.0± ∆R
)sruoh0001(efiLdaoL%2± ∆R%5.0± ∆R%4.0± ∆R
ecnatsiseRerutsioM%2± ∆R%5.0± ∆R%52.0± ∆R
tneiciffeoCegatloVG1< ΩV/mpp01-V/mpp5-V/mpp3.0-
)V/mpp=CV(G1ΩG01- ΩV/mpp03-V/mpp02-V/mpp5.1-
T7-G01 ΩA/NV/mpp001-V/mpp2-
HRWegattaegatloVcirtceleiD]mm[hcnIsnoisnemiD 01=K(**egnaRecnatsiseRdradnatS
3
01=M,
6
01=G,
9
01=T,
21
)
seireSC°52@*gnitaRhtgnertSL Ddmpp52mpp05mpp001mpp002 ≥≥
≥
≥≥ mpp004
8/1HRW8/1V005V005]0.1±1.6[40.±042.]6.0±61.2[520.±580.]6.[420.0M05-K001M001-K05M001-K01M005-K01G4-M005
4/1HRW4/1V057V005]0.1±0.9[40.±453.]0.1±00.3[40.±811.]6.[420.0M001-K001M001-K001M003-K01G1-K01G5-G1
2/1HRW2/1V0051V005]0.1±7.21[40.±005.]0.1±75.4[40.±081.]8.[130.0M001-K001M001-K001G1-K001G5-K001G5-G1
1HRW1V0002VK1]0.1±5.41[40.±175.]0.1±75.4[40.±081.]8.[130.0M001-K001M005-K001G2-K001G51-K001G05-G51
2HRW2V0005VK1]0.2±4.52[80.±00.1]3.1±37.6[50.±562.]1/8.[40./130.M001-K001M005-K001G2-K001G001-K001T3-G001
1
3HRW3VK01VK1]0.2±9.14[80.±56.1]3.1±37.6[50.±562.]1/8.[40./130.M001-K001M005-K001G2-K001G001-K001T01-G001
2
4HRW4VK51VK1]0.2±1.25[80.±50.2]3.1±31.8[50.±023.]1/8.[40./130.-M005-K001G2-K001G01-K001-
6HRW6VK02VK1]0.2±77[80.±30.3]3.1±31.8[50.±023.]1/8.[40./130.-M005-K005G2-K005G01-K001-
01HRW01VK53VK1]1.3±4.911[21.±07.4]3.1±31.8[50.±023.]1/8.[40./130.-M005-M1G2-M1G01-K001-
61HRW61VK06VK1]1.3±091[21.±84.7]3.1±31.8[50.±023.]0.1[40.0-M005-M1G2-M1G01-K001-
FA036C Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
RCD C omponents Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
RESISTORSCAPACITOR
S
C
OILSDELAY
LINES
HIGH VALUE & HIGH VOLTAGE CYLINDRICAL RESISTORS
RG SERIES - General Purpose
RH SERIES - High Precision
RP SERIES - Professional Grade
→ D ←
← L →
1.35” min (1.06” on
1/2W and smaller) d ±.004
↓
↑
69
RH2 - 1005 - F T 50 W
TC: 15=15ppm, 25 =25ppm, 50 =50ppm, 80 = 80ppm, 101 =100ppm,
201=200ppm, 351=350ppm, 401=400ppm, 102=1000ppm, 152=1500ppm)
P/N DESIGNATION:
RCD Type
4-Digit Resis. Code 0.1%-1%: 1001=1K, 1002=10K, 1003=100K,
1004=1M, 1005=10M, 1006=100M, 1G00=1GΩ, 10G0=10G,
100G=100G, 1T00=1TΩ, 10T0=10T
3-Digit Resis. Code 2%-10%: 102=1K, 103=10K, 104=100K, 105=1M,
106=10M, 107=100M,1G0=1G, 10G=10G, 100G=100G,1T0=1TΩ, 10T=10T
Packaging: B = Bulk, T = Tape & Reel
Tolerance: J=5%,G=2%,F=1%,D=.5%,C=.25%,B=.1%,A=.05%
Options
: P, H, B, 58, etc. (
leave blank if std)
Termination : W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
