EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1206 Package Chip LED (1.1 mm Height) 15-21/S2C-AQ2R2B/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. Descriptions The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide PART No. 15-21/S2C-AQ2R2B/2T Chip Material Emitted Color AlGaInP Brilliant Orange Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm, Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW IFP 60 mA Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 90.0 ----- 180 mcd Viewing Angle 21/2 ----- 140 ----- deg Peak Wavelength p ----- 611 ----- nm Condition IF=20mA Dominant Wavelength d 600.5 ---- 612.5 nm Spectrum Radiation Bandwidth ----- 17 ----- nm Forward Voltage VF 1.75 ----- 2.35 V XC Reverse Current IR ----- ----- 10 A VR=5V Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Bin Range Of Dom. Wavelength Group A Bin Min Max D8 600.5 603.5 D9 603.5 606.5 D10 606.5 609.5 D11 609.5 612.5 Unit Condition nm IF =20mA Unit Condition mcd IF =20mA Unit Condition V IF =20mA Bin Range Of Luminous Intensity Bin Min Max Q2 90.0 112 R1 112 140 R2 140 180 Bin Range Of Luminous Voltage Group B Bin Min Max 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Electro-Optical Characteristics (Ta=25) Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm, Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm, Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant 1 Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev Page: 7 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min.5 sec. Test Sample Ac/Re Hours/Cycles Size 22 Pcs. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/85%RH 1000 Hrs. 22 PCS. 0/1 2 6 Min. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3After opening the package, the LEDs should be kept at 30 or less and 70%RH or less(Floor life). However,it's recommended that The LEDs should be used within 168 hours (7 days) after opening the package.If unused LED remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu EVERLIGHT ELECTRONICS CO.,LTD. 15-21/S2C-AQ2R2B/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10 Device No: SZDSE-151-S05 Prepared date: 13-Apr-2005 Prepared by: Xiao wei Wu