9
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Note: All part numbers are RoHS compliant.
Signal Contacts
Material and Finish —See chart.
Contact Body—Brass or phosphor bronze
Retention Spring—Stainless steel
Application Tooling—Page 29
Technical Documents
114-10004 Application Specification
108-10042 Product Specification
Type III+, Crimp, Snap-In
Pin
Socket
[.0625+.0010
–.0020
[1.588+0.025]
–0.051
Dia.
Max.
Dia.
Pin Body Spring, Stainless Steel
Spring,
Stainless Steel
Ferrule, Brass,
Nickel Flash
.530±.010
[13.46±0.25]
.113
[2.87]
.390
[9.91] Min.
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size Ins. Contact Strip Form Loose Piece Tooling Part No.**
Range Dia. Finish Contact No. Contact No. Loose Piece Strip Form
AWG mm2Range Pin Socket Pin Socket Hand Tool Applicators
.015-.030 Gold/Nickel2788085-3 788088-2 — — 567867-1***
30-28 0.05-0.09 0.38-0.76 Sel. Gold/Nickel3788085-1 788088-1 788085-4 788088-3 90716-1 or 567947-1***
or 680602-□***
Bright Tin 1-66425-2 1-66424-1 — —
.040-.0601Gold/Nickel266425-7 66424-7 66429-3 66428-3 91515-16466598-□***
30-26 0.05-0.15 1.02-1.52 Sel. Gold/Nickel366425-8 66424-8 66429-4 66428-4
.014-.0301Gold/Nickel266393-7 66394-7 — —
0.36-0.76 Sel. Gold/Nickel366393-8 66394-8 66406-4 66405-4 90225-26466585-3***
Bright Tin 1-66106-5 1-66108-5 1-66107-1 1-66109-7 91515-16466321-□***
26-24 0.12-0.2 .035-.0551Gold/Nickel266106-7 66108-7 66107-3 66109-3 or or
0.89-1.40 Sel. Gold/Nickel366106-8 66108-8 66107-4 66109-4 58495-1* 466908-2***
Sel. Gold/Nickel4— 66108-1 — 66109-1
Bright Tin 2-66102-5 3-66104-0 1-66103-8 1-66105-9
.040-.0801Gold/Nickel266102-8 66104-8 66103-3 66105-3 91515-16466323-□***
1.02-2.03 Sel. Gold/Nickel366102-9 66104-9 66103-4 66105-4 or or
2-66102-272-66104-37— — 58495-1* 466907-2***
Sel. Gold/Nickel4— 66104-1 — 66105-1
24-20 0.2-0.6 .060-.120 5Bright Tin 1-66564-2 1-66563-1 66566-7 66565-7 466383-4***
1.52-3.05 Sel. Gold/Nickel366564-8 66563-8 66566-4 66565-4 91542-16or 466979-1***
or 567363-□***
Bright Tin 1-66332-4 1-66331-4 1-66400-0 1-66399-0 91523-16466324-□***
.080-.1001Gold/Nickel266332-7 66331-7 66400-3 66399-3 or or
2.03-2.54 Sel. Gold/Nickel366332-8 66331-8 66400-4 66399-4 90225-26466942-1***
Sel. Gold/Nickel4—66331-2 — 66399-2
1-66098-9S
Bright Tin 1-66098-8 1-66100-9 1-66099-5 1-66101-9 91505-16or 466325-□***
18-16 0.8-1.4 .080-.1001Gold/Nickel266098-8 66100-8 66099-3 66101-3 91523-16or or
2.03-2.54 Sel. Gold/Nickel366098-9 66100-9 66099-4 66101-4 58495-1* 466906-1***
Sel. Gold/Nickel466098-6 — 66099-1 —
Bright Tin 1-66359-4 1-66358-6 1-66361-2 1-66360-2
.080-.1001Phos Bronze 1-66359-5 1-66358-8 1-66359-5 1-66358-8 466326-□***
Gold/Nickel266359-9 66358-9 66361-3 66360-3 91519-16or
2.03-2.54
Sel. Gold/Nickel31-66359-0 1-66358-0 66361-4 66360-4 466923-2***
18-14 0.8-2.0 1-66359-2 1-66358-3 66361-8 66360-8
Sel. Gold/Nickel4— 66358-1 — 66360-1
.110-.150 5Bright Tin 66597-8 66598-9 66602-8 66601-9 466958-1***
1-66598-0 91521-16or
2.79-3.81 Sel. Gold/Nickel366597-2 66598-2 66602-2 66601-2 567364-□***
1Overall insulation crimp diameter, including crimp barrel, must not
exceed .125 [3.18].
2.000015 [0.00038] gold in the mating area over .000050 [0.00127]
min. nickel.
3.000030 [0.00076] gold in the mating area, with gold flash on remain-
der, over .000050 [0.00127] min. nickel.
4.000030 [0.00076] gold in the mating area, with gold gradient on
remainder, over .000050 [0.00127] min. nickel.
5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23-
24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
6To use with the 626 Pneumatic Tool: remove crimping head from Straight
Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1,
Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without),
and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot
actuated).
7Phosphor Bronze
SStandard reeling of strip form contacts.
*Commercial PRO-CRIMPER II hand tool for field repair only. Note:
Die Set can be adapted for use with 626 Pneumatic Tool System.
Insertion Tool Part No. 91002-1 (for insulation diameters .070 [1.78]
or less), No. 200893-2 (for insulation diameters .090 [2.29] max.).
Extraction Tool Part No. 305183. (Instruction Sheet 408-1216)
**There are power options available for these tools/dies. See Battery
Powered Crimp tool Kit and SDE Electric Terminator on page 30.
***Call Technical Support for Machine Applicator Part Numbers.
Socket
Pin
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 8.
10
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Material
Contact Body and Tab—Brass
Retention Spring—Stainless steel
Finish
See chart on Page 11.
Pin
Solder-Type
(with Preformed Wire
Barrel/Insulation Support)
Socket
Socket
Type III+, Solder Versions Spring, Stainless Steel
Localized Plate Area
Pin Body, Brass
1.085
[27.56] Max.
.825
[20.96] Max.
3.90
[9.91] Min.
.200
[5.08]
Min.
.0625+.0010
.0625–.0020
[1.588+.0254]Dia.
[1.588
–.0508
]
.530±.010
[13.46±0.25]
Signal Contacts (Continued)
Type III+, Crimp, Snap-In
Contact Size—16
Pin Diameter—.062 [1.57]
Material and Finish
Contact Body—Copper alloy, plated
tin or gold
Spring—Stainless steel
Wire Size Range Ins. Grounding Pin Part No. Strip Form Loose Piece
Dia. Contact Applicator Hand Tool**
[mm2] AWG Range1Finish Strip Form Loose Piece Part No. Part No.
.035-.055 Tin 164159-3 164162-1 —91515-13or
0.12-0.2 26-24 0.89-1.4 Sel. Gold/Nickel2164159-4 164162-2 58495-1*
.045-.070 Tin 164160-3 164163-1 466323-□*** 91515-13or
0.2-0.6 24-20 1.14-1.78 or91505-13or
Sel. Gold/Nickel2164160-4 164163-2 466907-2*** 58495-1*
.078-.098 Tin 164161-3 164164-1 466741-□*** 91523-13or
0.8-1.4 18-16 1.98-2.49 or 91505-13or
Sel. Gold/Nickel2164161-4 164164-2 680114-3*** 58495-1*
1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
2Gold flash over .000030 [0.00076] min. nickel on entire contact, with .000030 [0.00076] gold in contact area.
3Touse with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call
Technical Support at 800-522-6752),Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuat-
ed) or 189722-1 (foot actuated).
*Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.
***Call Technical Support at 1-800-522-6752 for Automatic Machine Applicator Part Numbers.
Extraction Tool Part No. 725840-1
Note: All part numbers are RoHS compliant.
Grounding Pin
(make first - break last)
Related Product Data
Application Tooling—Pages 29, 30
Technical Documents—Page 4
Pin
11
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Note: All part numbers are RoHS compliant except: tIndicates non-RoHS compliant.
Material
Contact Body and Tab—Brass
Retention Spring—Stainless steel
Finish
See chart.
Pin
Pin
Solder Tab
Socket
Socket
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size Loose Piece
Range Contact Contact No.
AWG [mm2]Finish Pin Socket
26-20 0.12-0.6 Gold/Nickel1266182-1t266183-1t
18-16 0.8-1.4 Gold/Nickel1266180-1t266181-1t
Solder Duplex2202236-7t202237-7t
Tab Bright Tin 202236-5t202237-5t
1.000030 [0.00076] gold in mating area over .000050 [0.00127] nickel.
2Duplex plated .000030 [0.00076] gold in mating area over .000050 [0.00127] nickel on contact body; bright tin-lead
on solder tab.
3Bright tin on entire contact.
Note: These contacts can be used in Multimate contact cavities of all connector housings.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 3.
Extraction Tool Part No. 305183 (Instruction Sheet 408-1216)
Type III+, Solder Versions
(Continued)
Spring, Stainless Steel
Pin Body, Brass
Localized Plate Area
Spring
Stainless Steel
Ferrule, Brass,
Nickel Flash Body
Brass Solder Post
Brass
.390
[9.91] Min.
1.112
[28.24] Max. .365
[9.27] Max.
.365
[9.27] Max.
.020
[0.51]
.058
[1.47]
.105
[2.67]
.865
[21.97]
.120
[3.05]
.200
[5.08]
Min.
.794±.010
[20.17±0.25]
.530±.010
[13.46±0.25]
.0625+.0010
.0625–.0020
[1.588+.0254]
[1.588
–.0508
]
Signal Contacts (Continued)
12
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Signal Contacts (Continued)
Material
Contact Body and Post—Brass
Retention Spring—Stainless steel
Finish
See chart.
Pin
Pin
Socket
Socket
Type III+, Posted
(Replacement Contacts,
See Note Below)
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Loose Piece Contact No.
Termination Post Contact 3Termination High Post 2 Termination High Post 1 Termination High Post
Method Configuration Finish Pin Socket Pin Socket Pin Socket
.025 x .025 Sel. Gold/Nickel16-66460-4 6-66461-3 6-66460-3 6-66461-2 6-66460-2 5-66461-5
0.64 x 0.64 Bright Tin 6-66460-6 5-66461-9 6-66460-7 5-66461-8 6-66460-5 5-66461-4
.045 x .045 Sel. Gold/Nickel11-66471-5 2-66473-0 — — 1-66471-8 1-66473-9
Wrap-Type 1.14 x 1.14 Bright Tin 1-66471-7 1-66473-8 — — 1-66471-6 1-66473-7
.031 x .062 Sel. Gold/Nickel11-66470-1 — — — 1-66470-0 —
0.79 x 1.57
TERMI-POINT .031 x .062 Sel. Gold/Nickel11-66468-3 1-66459-0 — — — —
Clip 0.79 x 1.57
1Gold flash over .000050 [0.00127] nickel on entire contact, with .000030 [0.00076] gold to a distance of .200 [5.08] from mating end. Gold thickness controlled
on socket O.D.
Posts plated tin-lead over copper.
Extraction Tool Part No. 305183 (Instruction Sheet 408-1216)
Insertion Tool Part No. 200893-2
Note: These contacts are used as replacement contacts for all posted connectors.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability
information on page 3.
Note: All part numbers are RoHS compliant.
.062
[1.58]
Dia.
Ref.
.525
[13.34]
.025±.001
[0.64±0.03]
Point of Gold Plating Thk.
Measurement
Body
Brass
Post
Brass
Spring
Stainless Steel
.025
[0.64]
.100
[2.54]
13
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Signal Contacts (Continued)
Material and Finish —See chart.
Contact Body—Copper Nickel Alloy
Retention Spring—Stainless steel
Related Product Data
Application Tooling —Pages 75-78
Technical Documents
114-10004 Application Specification
108-10024-2 Product Specification
Enhanced High Current
Type III+, Crimp, Snap-In
Ratings
Multiplication Rating Factor (F)
Pin
Socket
[.0625+.0010
–.0020
[1.588+0.025]
–0.051
Dia.
Max.
Dia.
Pin Body Spring, Stainless Steel Spring,
Stainless Steel
Ferrule, Brass,
Nickel Flash
.530±.010
[13.46±0.25]
.113
[2.87]
.390
[9.91] Min.
Contact Size 16—Pin Diameter .062 [1.57]
Wire Size Ins. Contact Strip Form Loose Piece Tooling Part No.**
Range Dia. Finish Contact No. Contact No. Loose Piece Strip Form
AWG mm2Range Pin Socket Pin Socket Hand Tool Applicators
466326-□***
.080-.1001Gold 1-66359-6 1-66358-9 1-66361-4 1-66360-4 91519-13or
18-14 0.8-2.0 2.03-2.54 Tin 1-66359-9 2-66358-1 1-66361-6 1-66360-6 466923-2***
.110-.1502Gold 1-66597-0 1-66598-1 66602-9 1-66601-0 466958-1***
2.79-3.81 Tin 1-66597-1 1-66598-2 1-66602-0 1-66601-2 91521-13or
567364-□***
Socket
Pin
1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
2Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
3
To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly,
order SAHT Adapter Part No. 217201-1,Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and
Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.
*** Call Technical Support for Automatic Machine Applicator Part Numbers.
Note: All part numbers are RoHS compliant.
Voltage: 250 Volts AC/DC
600 Volts AC/DC, Series I, VDE tested and select loaded only
Base Current: Type III+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire
Enhanced High Current Type III+ contacts: 25 amperes,30˚C temperature rise with single contact on 14 AWG wire
Temperature: -55˚C to +105˚C
VDE 0627: XA/630/4KV/2 - Series I, VDE tested only
Type III+ Contacts (Note: 1 = 17 amperes)
Single Circuit ≅50% 100%
Shell Size Wire Size Wire Size Wire Size
30 AWG 14 AWG 30 AWG 14 AWG 30 AWG 14 AWG
11-4 .291 1 .212 .905 .140 .684
13-9 .278 .995 .175 .750 .134 .567
17-16 .270 .990 .146 .625 .127 .472
23-24 .281 .985 .138 .550 .120 .416
23-37 .275 .985 .131 .497 .114 .376
Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes)
Single Circuit ≅50% 100%
Shell Size 14 AWG 14 AWG 14 AWG
11-4 .880 .840 .640
13-9 .880 .640 .480
17-16 .880 .520 .400
23-24 .880 .520 .400
23-37 .880 .440 .320
Percent Connector Loading
Percent Connector Loading
Enhanced High Current Contacts & M Series Connectors:
(Note: 1 = 24 amperes)
Single Circuit ≅50% ≅100%
14 AWG 14 AWG 14 AWG
1 .292 .250
Enhanced High Current Contacts & Metrimate Connectors:
(Note: 1 = 24 amperes)
Single Circuit ≅50% ≅100%
14 AWG 14 AWG 14 AWG
1 .458 .375
14
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
14
Signal Contacts (Continued)
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Tooling Part No.**
Wire Size Ins. Tape Mounted Loose Piece Contact Tape Mounted Loose Piece
Range Dia. Contact No.2Contact No. Color Dies for Die Set for Hand
AWG mm2Range1Pin Socket Pin Socket Code AMP-TAPETRONIC 626 Pneumatic Tool
Machine 69875 Tool System
.035-.055 —
0.89-1.40 201611-4 201611-14201613-15Red/Red 91538-1*
.048-.065 ——
90230-17or 601967-1*
28-24 0.08-0.20 1.22-1.65 201334-14201332-15Red/Red 90249-2
.095-.110 —— — 601967-1*
2.41-2.79 202410-14202411-15Green
.040-.062 —91538-1*
1.02-1.57 201578-4 201578-14201580-15Yellow/Red or 58541-1*
24-20 0.2-0.6 .055-.088 90249-2 90230-17
or 601967-1*
1.40-2.16 201330-6 201328-9 201330-14201328-15Yellow/Red
18 0.9-0.9 No. Ins. —— 91539-1*
(Two) (Two) Support 202725-14202726-14Blue — 90231-27or 601967-1*
.080-.105 ———90136-1*
2.03-2.67 202507-14202508-15——or 601967-1*
18-16 0.8-1.4 200336-6 200333-8 200336-14200333-14Blue/Blue 90250-1 90231-2791539-1*
No Ins. —————58541-1*
Support ,6204219-15,6 Blue/Blue or 601967-1*
3212618-23—212618-13,6,† —Violet/Blue 90250-1 90231-2791539-1-
No Ins. 201570-2 201568-3 201568-15——58541-1*
14 2Support 201570-14Violet/Blue or 601967-1*
1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
2For AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel).
3Grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves.
4Use turret TH502 (1-601967-6)with hand tool 601967-1.
5Use turret TH501 (1-601967-5)with hand tool 601967-1.
6Pin length is .630±.005 [16.002±.127]on these two pins.
7Die Set requires “C” Head Adapter Part No. 318161-1;Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit
Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
*Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.
†Does not use Hand Tool 91539-1 or 601967-1.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability informa-
tion on page 8.
Insertion Tool Part No. 200893-2 (for insulation diameters .070 [1.78] or less).
Extraction Tool Part No. 305183.
Note: All part numbers are RoHS compliant.
Type II, Screw Machined,
Crimp
Material
Contact Body—Brass
Retention Spring—Stainless steel
Finish
Contact Body—.000030 [0.00076]
gold over .000050 [0.00127]
nickel. Gold thickness controlled
on socket O.D.
Retention Spring—Stainless steel
Related Product Data
Application Tooling—Pages 75-78
Pin
Pin
Socket
Socket
.795±.010
[20.19±0.25]
.472±.005
[11.99±0.13]
.062±.001
[1.57±0.03]Dia.
Spring
Spring
Socket Body
Pin Body
.107 Max. Dia.
[2.72]
1.087±.010
[27.61±0.25]
15
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
15
Signal Contacts (Continued)
Material
Pin Body—Brass
Socket—Phosphor bronze
Contact Finish
A—Select gold flash over nickel
on entire contact, with additional
.000030 [0.00076] gold on
mating end
B—Duplex plated .000030
[0.00076] gold on mating end, tin
on termination end, with entire con-
tact nickel underplated
C—Gold flash over nickel on entire
contact
D—Duplex plated gold flash on
mating end, tin on termination end,
with entire contact nickel underplated
Insertion/Extraction Tool Part No.
91285-1
Instruction Sheet—408-9404
This tool includes interchangeable tips
to Insert/Extract:
Size 22, 28-22 AWG [0.08-0.03mm2]
Crimp Contacts
Size 20, 28-20 AWG [0.08-0.6mm2]
Crimp and Solder Cup Contacts
Size 20, Posted Contacts
Pin
Socket
Socket
Size 20 DF, Crimp, Snap-In
Contact Size—20
Pin Diameter—.040 [1.02]
*See Product Spec 108-40005
.085
[2.16] Dia. Max.
.085
[2.16] Dia. Max.
.390
[9.91]
.370
[9.34]
.555
[14.1]
.575
[14.61]
[.0400±.0015
[1.02±0.034]Dia.
Localized Gold Plate Area
Localized Gold Plate Area
.150
[3.81]
.055
[1.40] Min.
Contact Part Nos. Tooling** Color
Wire Ins. Contact
Pin Socket Code
Size Dia. Finish Strip Form Hand (Loose
Range Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator†† Tool Piece)
A 66507-3t66507-9t66505-3t66505-9t
.040 B 1658540-1t1658540-5t1658538-2t—466423-□†† tBlue
28-24 1.02 C 66507-4t1-66507-0t66505-4t1-66505-0tor 466901-1††t91503-1†tDot
AWG D1658540-5t1658540-2t1658538-3t1658538-1tor 1016015-1††t
[0.08-0.2 A 66682-2t66682-4t66683-2t66683-4t466758-2††t
mm2].060 B5066682-9t—1-5066683-0t—or 466963-1††t91549-1†tBlack
1.52 D5066682-6t—5066683-7t—or 567804-1††tDot
26-22 A 745254-2t745254-6t745253-2t745253-6t
AWG .050 B 1658544-2t1658544-1t1658543-2t1658543-1t466968-1††tYellow
[0.12-0.4 1.27 C 745254-3t745254-7t745253-3t745253-7tor 567036-□††t91525-1†tDot
mm2]D 1658544-3t— 1658543-3t—or 567849-1††t
24-20 A 66506-3t66506-9t66504-3t66504-9t466422-□††t
AWG .060 B1658539-1t1658539-3t1658537-3t1658537-4tor 466900-1††tRed
[0.2-0.6 1.52 C 66506-4t1-66506-0t66504-4t1-66504-0tor 567801-1††t91503-1†tDot
mm2]D1658539-2t1658539-4t1658537-1t1658537-2tor 1016002-1††t
†To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT)
Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752),Adapter Holder Part No. 356304-1
(with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines,
contact Technical Support: 1-800-522-6752.
Note: Commercial PRO-CRIMPER II Maintenance and Repair Hand Tool for Wire Size 28-24 AWG [0.08-0.2mm2]
(Ins. Dia. Max. .040 [1.02]), and Wire Size 24-20 AWG [0.2-0.6mm2](Ins. Dia. Max. .060 [1.52])—Part No. 58448-2.
Note: Die Set Part No. 58448-3 can be adapted for use with the 626 Pneumatic Tool System.
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric
Terminator on page 30.
Note: All part numbers are RoHS compliant except: tIndicates non-RoHS compliant.
Pin
With Insulation Support
16
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Signal Contacts (Continued)
Without Insulation Support
Pin
Pin
Socket
Socket
Color
Wire Contact Contact Part Nos. Tooling**
Code
Size Ins. Dia. Finish Pin Socket Strip Form Hand (Loose
Range Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator Tool Piece)
28-24
AWG .068 A 205310-2t— 205311-3t—
[0.08-0.2 1.73 C————
†† ——
mm2]
24-20
AWG .068 A 205202-2t— 205201-3t205201-5tRed
[0.2-0.6 1.73 C 205202-6t205202-7t205201-6t205201-7t
†† 91548-1tDot
mm2]
22-18 A 745229-2t745229-4t745230-2t745230-4t
AWG .068 B 1-745229-1t— 1-745230-1t1-745230-3tGreen
[0.4-0.8 1.73 C745229-5t745229-7t745230-5t745230-7t†† 91513-1tDot
mm2]D — — 745230-8t—
.085
[2.16] Dia. Max.
.390
[9.91]
.550
[14.0]
.100
[2.54]
Point of
Measurement
.530
[13.46]
.085
[2.16] Dia. Max.
.0400±.0015
[1.02±0.034]Dia.
.150
[3.81]
Localized Gold Plate Area
Size 20 DF, Crimp, Snap-In
(Continued)
††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines,
contact Technical Support: 1-800-522-6752.
Note: Wire insulation diameter is limited by the connector housing cavity and clearance for the
insertion/extraction tool.
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric
Terminator on page 30.
Note: All part numbers are RoHS compliant except: tIndicates non-RoHS compliant.
1717
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514
are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Note: All part numbers are RoHS compliant.
Pin
Pin
Socket
Socket
Size 20 DF, Solder, Snap-In
Contact Size—20
*See Product Spec 108-40005
Material
Pin—Brass
Socket—Phosphor bronze
Contact Finish
Gold flash over nickel on entire contact,
with additional .000030 [0.00076] gold
on mating end
Contacts to be soldered to wire
before being inserted into housing.
18 AWG [0.8-0.9 mm2]Max. Wire
Strip Form Loose Piece
Contact No. Contact No.
Pin Socket Pin Socket
66570-2 66569-2 66570-3 66569-3
.085
[2.16] Dia. Max.
.390
[9.91]
.133
[3.38]
Max.
.560
[14.22] Ref.
.085
[2.16] Dia. Max.
.070
[1.78] Dia. Max.
.580
[14.73]
.0400±.0015
[1.02±0.034]Dia.
.155
[3.94]
Localized Gold Plate Area
Signal Contacts (Continued)
