ALUMINUMELECTROLYTICCAPACITORS UWT Chip Type, Wide Temperature Range Chip type operating over wide temperature range of to - 55 to +105C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. Values marked with an in the dimension table are scheduled to be discontinued and are not recommended for new designs. UWZ High Temperature Reflow UWF Low impeadance UUT Long Life UWT Smaller UZT Specifications Item Performance Characteristics Category Temperature Range -55 to +105C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 1500F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz at 20C 4 0.40 Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.30 10 0.24 16 0.20 25 0.16 35 0.14 50 0.14 Measurement frequency : 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z- 40C / Z+20C The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C. Endurance Resistance to soldering heat Marking Chip Type (3 to 8 x 5.4 ) Positive H 35 2 3 50 2 3 B0.2 0.5 MAX. 0.5 MAX. 0.5 MAX. Negative 1. Voltage mark for 6.3V is 6V . In case of marking for 3 units, "V" for rated voltage is omitted. L0.5 H 2. case of marking for 3 units. Lot No is expressed by a digit (month code). LotInNo. Pressure relief vent 5 6 1 7 8 2 9 10 11 12 13 14 3 4 5 6 7 8 D code 3 to 8 (5.4L) GB 6.3 to 10 (L 5.8) GS 9 10 11 12 13 14 UWT 1 C 1 0 0 MC L 1 G B 6.3 Package code Size code D Configuration 3 D code 4 to 10 3 to 8 (L 7.7) CL Rated capacitance (10F) 8 to 10 (L tolerance = 10) NL (20%) Capacitance Rated voltage (16V) Capacitance tolerance (20%) Series name Rated capacitance (10F) Type Rated voltage (16V) code 2 1 Configuration D 3 to 8 (L 7.7) 8 to 10 (L = 10) code CL NL Series name H B0.2 D0.5 A2P 100 35V Pressure relief vent 4 Positive C0.2 0.3 MAX. L0.5 3 Positive A0.2 E A0.2 D0.5 A2P 100 35V C0.2 Plastic platform 1 Voltage 2 Negative 3 0.3 MAX. 1 UWT 1 C 1 0 0 MC L 1 G B H Plastic platform Capacitance Lot No. A0.2 E A0.2 Negative 3 3 Apply to 6.3 x 5.8, 6.3 x 7.7 1 10Voltage ) Positive Type 0.5 MAX. (8 x 10, 10 x 10 ) Capacitance 105C Marking Trade mark 25 2 4 tan 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value A0.2 E A0.2 +0.1 -0.2 (L0.3) x C0.2 +0.1 3 Apply to 6.3 L x 5.8, -0.26.3 x 7.7 2 105C Marking (8 xmark 10, 10 Trade 16 2 4 Within 25% of the initial capacitance value for capacitors of 3mm unit, and 16V or less. Within 20% of the initial capacitance value for capacitors of 25V or more. Capacitance change D A0.2 E A0.2 L (L0.3) Lot No. C0.2 B0.2 D0.5 A2P A2P 10 16V 10 16V 2 D0.5 Plastic platform 1 0.3 MAX. Voltage 0.3 MAX. 105C Marking Lot No. Plastic platform B0.2 1 Voltage 105C Marking 10 3 8 Type numbering system (Example : 16V 10F) (3 to 8 x 5.4 ) Capacitance 6.3 4 8 After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which Capacitance change Within 10% of the initial capacitance value is maintained at 250C. The capacitors shall meet the Less than or equal to the initial specified value tan characteristic requirements listed at right when they are Less than or equal to the initial specified value Leakage current removed from the plate and restored to 20C. Black print on the case top. Shelf Life Capacitance 4 7 15 Negative 1. Voltage mark for 6.3V is 6V . In case of marking for 3 units, "V" for rated voltage is omitted. 2. In case of marking for 3 units. Lot No is expressed by a digit (month code). 116 3 x 5.4 4 x 5.4 5 x 5.4 6.3 x 5.4 6.3 x 5.8 6.3 x 7.7 8 x 5.4 A 1.5 1.8 B 3.3 D 4.3 C 3.3 4.3 E 0.8 1.0 1.3 2.2 L 5.4 B 5.4 5.43.3 5.4 H Dimension table in next page. xL A 2.1 xL 5.3 3x 2.4 2.4 2.4 3.3 (mm) 8 x 10 10 x 10 2.9 3.2 6.6 6.3 8.3 10.3 x 7.7 8 x 5.4 x 5.4 6.38.3x 5.8 6.3 5.4 6.64 x 5.46.6 5 x 5.4 5.3 1.5 6.6 6.6 1.8 6.6 8.3 2.4 2.4 3.3 5.37.7 6.6 5.4 6.6 10 106.6 8.3 0.5 to 0.8 0.5 to 0.8 0.5 to 0.84.3 0.5 to 0.8 5.3 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 6.6 1.1 C0.8 0.5 to 3.3 6.6 6.6 8.3 2.2 2.3 2.4 10.3 4.5 4.3 5.8 2.1 8.3 3.1 2.2 E 0.8 1.0 1.3 2.2 2.2 2.2 2.3 L 5.4 5.4 5.4 5.4 5.8 7.7 5.4 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0 CAT.8100H ALUMINUMELECTROLYTICCAPACITORS UWT Dimensions V Cap. (F) Code 4 0G 6.3 0J 10 1A 16 1C 25 1E 35 1V 50 1H 4 x 5.4 ( 3) 6.3 (5.9) 1 010 2.2 2R2 3 x 5.4 7.5 4 x 5.4 ( 3) 11 (9) 3.3 3R3 3 x 5.4 9 4 x 5.4 14 4.7 4R7 4 x 5.4 ( 3) 13 (10) 4 x 5.4 15 5 x 5.4 19 5 x 5.4 23 5 x 5.4 25 6.3 x 5.4 38 6.3 x 5.4 42 8 x 5.4 48 8 x 5.4 10 100 22 220 4 x 5.4 22 4 x 5.4 22 33 330 5 x 5.4 30 5 x 5.4 47 470 5 x 5.4 36 5 x 5.4 100 101 6.3 x 5.4 60 6.3 x 5.4 150 151 6.3 x 5.8 86 6.3 x 5.8 220 221 8 x 5.4 330 331 6.3 x 7.7 105 6.3 x 7.7 470 471 8 x 10 210 8 x 10 4 x 5.4 ( 3) 18 (14) 102 (91) 8 x 5.4 5 x 5.4 27 5 x 5.4 30 6.3 x 5.4 30 5 x 5.4 35 6.3 x 5.4 40 6.3 x 5.4 36 6.3 x 5.4 46 6.3 x 5.4 50 8 x 5.4 60 6.3 x 5.4 60 6.3 x 5.4 60 6.3 x 7.7 86 6.3 x 5.8 86 6.3 x 7.7 95 6.3 x 7.7 105 6.3 x 7.7 105 105 8 x 10 195 8 x 10 210 8 x 10 210 8 x 10 10 x 10 310 102 (91) 680 681 8 x 10 210 8 x 10 210 10 x 10 310 1000 102 8 x 10 230 8 x 10 230 10 x 10 310 1500 152 10 x 10 310 10 x 10 310 59 (52) 6.3 x 7.7 30 51 (45) 60 66 (59) 6.3 x 5.8 63 6.3 x 7.7 63 91 6.3 x 7.7 84 8 x 10 140 8 x 10 140 8 x 10 155 10 x 10 180 8 x 10 155 8 x 10 190 10 x 10 220 195 8 x 10 190 10 x 10 300 230 10 x 10 300 Rated Case size D x L (mm) ripple Rated ripple current (mArms) at 105C 120Hz ( 3 ) : 3 In such a case, 2 will be put at 12th digit of type numbering system. However, 3 which are scheduled to be discontinued. Not recommended for new designs. Size 6.3 x 5.8 is available for capacitors marked. " " In such a case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please select UUX(p.158), UUJ(p.164) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. 117 CAT.8100H