M. K. JUCHHEIM GmbH & Co JUMO Instrument Co. Ltd. JUMO PROCESS CONTROL INC. Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk 885 Fox Chase, Suite 103 Coatesville PA 19320, USA Phone: 610-380-8002 1-800-554-JUMO Fax: 610-380-8009 e-mail: info@JumoUSA.com Internet: www.JumoUSA.com Data Sheet 95.1540 Page 1/4 JUMO di eco Digital Temperature Indicator, microprocessor-controlled, with 10A changeover relay, in 76mm x 36mm format Brief description The JUMO di eco compact digital indicator is used for visualizing temperatures which are acquired through Pt100, Pt1000 or KTY2X-6 resistance thermometers in a 2-wire circuit. The measurement is shown on a 3-digit display with red background lighting. Limit infringements can be monitored by means of a 10A changeover relay and signaled via an LED. From the 3 buttons on the front panel it is possible to configure, among others, the switching differential and alarm suppression. The electrical connection is made via screw terminals on the back of the instrument. Block structure Features Output Measurement input JUMO di eco (configurable) - Pt100 - Pt1000 - KTY2X-6 in 2-wire circuit Supply 230 V AC 115 V AC 24 V DC 12 V DC +10/-15 % +10/-15 % +15/-15 % +15/-15 % Type 951540/... floating changeover relay 10 A 250 V AC resistive load k Limit monitoring with a 10A changeover relay k Adjustable switching differential k Configurable alarm suppression k Symbols for temperature unit, minutes and seconds in display LC display 3-digit display with background lighting for visualization of temperature and parameters k Parameter level protected by code k Each parameter can be enabled individually for operation k Simple mounting k Programmable switch-on delay after power ON k UL approval applied for Displays and controls LC display LED K1 3-digit segment display, 13 mm high, with symbols for C, F, min and s, with red background lighting LED K1 flashes during alarm suppression period LED K1 comes on when limits are infringed or on a probe error Buttons programming increase parameter value decrease parameter value + version display + exit, jump to basic status (temperature indication) 03.03/00412169 M. K. JUCHHEIM GmbH & Co * 36035 Fulda, Germany Data Sheet 95.1540 Page 2/4 Technical data Measurement input Designation Accuracy1 Range Over/underrange Pt100 EN 60 751 -200 to +500C 0.1% is recognized Pt1000 EN 60 751 -200 to +500C 0.1% is recognized -50 to 150 C 1% KTY2X-6 Sampling time Input filter Lead compensation Temperature offset Features 1 is recognized 250 msec 1st order digital filter; filter constant adjustable from 0 -- 99.9sec adjustable via the parameter Lead compensation resistance adjustable via the parameter temperature display C or F (Fahrenheit) The accuracy refers to the maximum range span Environmental effects Ambient temperature range 0 to +55C Ambient temperature range for side-by-side mounting 0 to +40C Storage temperature range -40 to +70C Temperature drift Climatic conditions Care of the front panel 100ppm/C of range 75% relative humidity, no condensation The front panel can be cleaned with all the usual washing and rinsing agents. Do not use any solvents such as methylated spirits, white spirit, P1 or xylol! Output Relay 150,000 operations at 10A 250V AC resistive load 800,000 operations at 3A 250V AC resistive load Supply Supply voltage Power consumption 230V AC +10/-15%, 115V AC +10/-15%, 24V DC +15/-15%, 12V DC +15/-15% <3VA Housing Material Mounting Operating position Weight Enclosure protection Flammability class polycarbonate in panel cut-out with bezel seal unrestricted approx. 160g front IP65, back IP20 UL 94 V0 Electrical data Data backup Connection circuit EMC - interference emission - immunity to interference Electrical safety 03.03/00412169 EEPROM via screw terminals for wire cross-sections up to 4 mm2 solid wire and 2.5 mm2 stranded wire EN 61 326 Class B to industrial requirements to EN 61 010, Part 1 overvoltage category III, pollution degree 2 M. K. JUCHHEIM GmbH & Co * 36035 Fulda, Germany Data Sheet 95.1540 Page 3/4 Connection diagram Output 10A 250V AC resistive load S 1 Supply voltage as per nameplate O P 2 3 6 7 N L1 AC 230V AC 115V Pt100/1000 KTY2X-6 DC = - + 24V DC = + - Measurement input 12V Supply Dimensions Mounting frame 76 C 36 55 28 K1 56 5 68.5 0 Snap-in lugs Bezel size: 76mm x 36 mm Panel cut-out: Side-by-side mounting up to 40C max. ambient temperature: 69-0 mm x 28.5 -0 mm +2.5 75 Spring clip 03.03/00412169 +1 spacing of units: 10mm horizontal, 15mm vertical M. K. JUCHHEIM GmbH & Co * 36035 Fulda, Germany Order details: Digital Temperature Indicator, microprocessor-controlled, with 10A changeover relay, in 76mm x 36 mm format (1) Basic version 951540/ x x 888 999 x x x x 02 05 18 20 JUMO di eco (2) Input (configurable) factory-set (Pt100 in 2-wire circuit) configuration to customer specification (Pt1000 in 2-wire circuit or KTY2X-6)1 (3) Supply 230V AC +10/-15%, 48 -- 63Hz 115V AC +10/-15%, 48 -- 63Hz 24V DC +15/-15% 12V DC +15/-15% (1) Order code Order example 1 (2) / 951540 / (3) - 888 - 02 For configuration to customer specification, please specify the probe type and the required settings in plain text Standard accessories - 1 Operating Instructions B 95.1540.0 - 1 mounting frame - 1 bezel seal 03.03/00412169 Data Sheet 95.1540 Page 4/4