EVERLIGHT ELECTRONICS CO.,LTD. Device Number : DLE-100-002 REV: 1.1 ECN : Page: 1/4 3.68*6.22mm Rectangular Legend LED Lamps MODEL NO : 1003GD Features : Package Choice of various viewing angles Availablc on table and reel Reliable and rubust Dimensions: Descriptions : The series is specially designes for applications requiring higher brightness than that achievable with standard lamps. The LED lamp are available with different colors, light intensities, epoxy colors, etc. Applications : TV set Monitor Telephone Computer Notes : 1.All dimensions are in millimeters. 2.An epoxy meniscus may extend about 1.5mm(0.059") down to the lead. PART NO 1003GD Chip Lens Color Material Emitted Color GaP Green OFFICE : NO. 25,Lane 76,Sec.3, Chung Yang Rd., Tucheng 236, Taipei, Taiwan, R.O.C. TEL : 886-2-2267-2000,2267-9936 FAX : 886-2-2267-6244,22676189,22676306 http://www.everlight.com Green Diffused EVERLIGHT ELECTRONICS CO.,LTD. Device Number : REV: DLE-100-002 1.1 3.68*6.22mm Rectangular Legend LED Lamps MODEL NO : 1003GD ECN : Page: 2/4 Absolute Maximum Ratings at Ta = 25 Parameter Symbol Rating Unit Forward Current If 30 mA Operating Temperature Topr -40 to +85 Storage Temperature Tstg -40 to +100 Soldering Temperature Tsol 260 5 Power Dissipation Pd 100 mW Peak Forward Current(Duty 1/10 @ 1KHZ) If(Peak) 160 mA Reverse Voltage Vr 5 V Electronic Optical Characteristics : Parameter Symbol MIN. TYP. MAX. Unit Condition Luminous intensity Iv 1.0 4.0 mcd If= 10 mA Viewing Angle 21/2 100 deg If= 20 mA Peak Wavelength p 565 nm If= 20 mA Dominant Wavelength d 570 nm If= 20 mA Spectrum Rediation Bandwidth 30 nm If= 20 mA Forward Voltage Vf 1.7 2.1 2.4 V If= 20 mA Reverse Current Ir 10 A Vr= 5 V EVERLIGHT ELECTRONICS CO.,LTD. Device Number : DLE-100-002 REV: 1.1 Page: 3/4 3.68*6.22mm Rectangular Legend LED Lamps MODEL NO : 1003GD Typical Electro-Optical Characteristic Curves ECN : EVERLIGHT ELECTRONICS CO.,LTD. Device Number : DLE-100-002 REV: 1.1 Page: 4/4 3.68*6.22mm Rectangular Legend LED Lamps MODEL NO : 1003GD ECN : Reliability test item and condition No Item Test Conditions Test Hours/Cycle Sample Size Ac/Re 1 Solder Heat TEMP : 260 5 5 SEC 76 PCS 0/1 50 CYCLE 76 PCS 0/1 50 CYCLE 76 PCS 0/1 H : +85 30min 5 min L : -55 30min H : +100 5min 10 sec L : -10 5min 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage TEMP : 100 1000 HRS 76 PCS 0/1 5 Low Temperature Storage TEMP : -55 1000 HRS 76 PCS 0/1 6 DC Operating Life If = 20 mA 1000 HRS 76 PCS 0/1 7 High Temperature / High Humidity 85/85% RH 1000 HRS 76 PCS 0/1