EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : DLE-100-002 REV: 1.1
3.68*6.22mm Rectangular Legend LED Lamps
MODEL NO : 1003GD ECN : Page: 1/4
█ Features : █ Package Dimensions:
●Choice of various viewing angles
●Availablc on table and reel
●Reliable and rubust
█
Descri
p
tions :
●The series is specially designes for
applications requiring higher
brightness than that achievable with
standard lamps.
●The LED lamp are available with
different colors, light intensities,
epoxy colors, etc.
█ Applications : █ Notes :
●TV set 1.All dimensions are in millimeters.
●Monitor 2.An epoxy meniscus may extend about
●Telephone 1.5mm(0.059") down to the lead.
●Computer
PART NO Chip Lens Color
Material Emitted Color
1003GD GaP Green Green Diffused
OFFICE : NO. 25,Lane 76,Sec.3, Chung Yang Rd., Tucheng 236, Taipei, Taiwan, R.O.C.
TEL : 886-2-2267-2000,2267-9936
FAX : 886-2-2267-6244,22676189,22676306
http://www.everlight.com
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : DLE-100-002 1.1
3.68*6.22mm Rectangular Legend LED Lamps
MODEL NO : 1003GD ECN : Page:
█Absolute Maximum Ratings at Ta = 25℃
Parameter Symbol Rating Unit
Forward Current If 30 mA
Operating Temperature Topr -40 to +85 ℃
Storage Temperature Tstg -40 to +100 ℃
Soldering Temperature Tsol 260 ± 5 ℃
Power Dissipation Pd 100 mW
Peak Forward
Current(Duty 1/10 @
1KHZ) If(Peak) 160 mA
Reverse Voltage Vr 5 V
█Electronic Optical Characteristics :
Parameter Symbol MIN. TYP. MAX. Unit Condition
Luminous intensity Iv 1.0 4.0 ／mcd If= 10 mA
Viewing Angle 2θ1/2 ／100 ／deg If= 20 mA
Peak Wavelength λp／565 ／nm If= 20 mA
Dominant Wavelength λd／570 ／nm If= 20 mA
Spectrum Rediation
Bandwidth △λ ／ 30 ／nm If= 20 mA
Forward Voltage Vf 1.7 2.1 2.4 V If= 20 mA
Reverse Current Ir ／／
10 μAVr= 5 V
REV:
2/4
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : DLE-100-002 REV: 1.1
3.68*6.22mm Rectangular Legend LED Lamps
MODEL NO : 1003GD ECN : Page: 3/4
█Typical Electro-Optical Characteristic Curves
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : DLE-100-002 REV: 1.1
3.68*6.22mm Rectangular Legend LED Lamps
MODEL NO : 1003GD ECN : Page: 4/4
█Reliability test item and condition
No Item Test Conditions Test
Hours/Cycle Sample Size Ac/Re
1 Solder Heat TEMP : 260℃ ± 5 ℃5 SEC 76 PCS 0/1
H : +85
℃
30min
2 Temperature Cycle ∫ 5 min 50 CYCLE 76 PCS 0/1
L : -55
℃
30min
H : +100
℃
5min
3 Thermal Shock ∫ 10 sec 50 CYCLE 76 PCS 0/1
L : -10
℃
5min
4High Temperature
Storage TEMP : 100℃1000 HRS 76 PCS 0/1
5Low Temperature
Storage TEMP : -55℃1000 HRS 76 PCS 0/1
6 DC Operating Life If = 20 mA 1000 HRS 76 PCS 0/1
7High Temperature /
High Humidity 85℃/85% RH 1000 HRS 76 PCS 0/1
