L1I0-0850090000000 - LUMILEDS HOLDING B.V.

INFRARED

The LUXEON IR Domed Line is a product line of high power infrared

emitters tailored to application needs by oering a variety of products at

multiple infrared wavelengths and optical radiation patterns. LUXEON IR

Domed Line is designed with innovative LUXEON technology to provide

industry-leading performance. Through best-in-class thermal conductivity,

LUXEON IR Domed Line has excellent performance at actual operating

conditions. The LUXEON IR Domed Line uses an industry standard

footprint for ease of integration and upgrading existing system designs.

LUXEON IR Domed Line

High power infrared emitters with

engineered primary optics for high

eciency and beam control

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Radiant Power: 1350mW (850nm) and 1450mW (940nm) for a greater

system performance Surveillance / CCTV

Four emission patterns: 60°, 90° and 150° as well as an asymmetric radiation

pattern of 95 x 58° to address diverse application needs Machine Vision

3.7mm x 3.7mm package with a 3 pad conguration that is compatible with

the industry standard footprint to enable a direct upgrade in existing designs 3D Scanning / Time of Flight

Ultra-low Rth of 2.5°C/W, the industry’s best thermal conductivity, solves

thermal challenges and supports space saving designs Biometric Identication

User Interface Control

Augmented / Virtual Reality

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Radiometric Power Maintenance ......................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Electrical and Thermal Characteristics..................................................................3

Absolute Maximum Ratings .......................................................................4

Characteristic Curves .............................................................................5

Spectral Power Distribution Characteristics .............................................................5

Light Output Characteristics ..........................................................................5

Forward Current Characteristics.......................................................................6

Wavelength Shift Characteristics.......................................................................7

Radiation Pattern Characteristics ......................................................................7

Permissible Pulse Handling Characteristics .............................................................9

Product Bin and Labeling Denitions ..............................................................10

Decoding Product Bin Labeling.......................................................................10

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Peak Wavelength Bins...............................................................................11

Forward Voltage Bins ...............................................................................11

Mechanical Dimensions..........................................................................12

Reow Soldering Guidelines ......................................................................13

JEDEC Moisture Sensitivity ...........................................................................13

Solder Pad Design ..................................................................................14

Packaging Information...........................................................................14

Pocket Tape Dimensions ............................................................................14

Reel Dimensions ...................................................................................16

General Product Information

Product Test Conditions

LUXEON IR Domed Line emitters are tested and binned with a 20ms monopulse of 1000mA at a junction temperature, Tj, of 25°C.

Part Number Nomenclature

Part numbers for LUXEON IR Domed Line follow the convention below:

L 1 I 0 – 0 A A A B B B B X X X X X

Where:

A A A – designates nominal peak wavelength

B B B B – designates full width half maximum of the emitter’s radiation pattern

X X X X X – reserved for further customization

Therefore, the following part number is used for a LUXEON IR Domed emitter with a peak wavelength of 850nm and a FWHM

beam angle of 60°:

L 1 I 0 – 0 8 5 0 0 6 0 0 0 0 0 0

Radiometric Power Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON IR Domed

Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely

the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following

restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or

polybrominated diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1. Product performance and optical characteristics of LUXEON IR Domed Line at 1000mA, Tj=25°C.

PEAK

WAVELENGTH [1]

(nm)

TYPICAL

FWHM BEAM

ANGLE (°)

RADIOMETRIC POWER [2]

(mW)TYPICAL RADIANT

INTENSITY

(mW/sr)

TYPICAL

SPECTRUM FWHM

(nm)

PART NUMBER

MINIMUM TYPICAL

850 150 1000 1350 335 35 L1I0-0850150000000

850 90 1000 1350 750 35 L1I0-0850090000000

850 60 1000 1350 1150 35 L1I0-0850060000000

850 95 x 58 1000 1350 650 35 L1I0-0850955800000

940 150 1100 1450 350 50 L1I0-0940150000000

940 90 1100 1450 780 50 L1I0-0940090000000

940 60 1100 1450 1190 50 L1I0-0940060000000

940 95 x 58 1100 1450 700 50 L1I0-0940955800000

Notes for Table 1:

1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements.

2. Lumileds maintains a tolerance of ±7% on radiometric power measurements.

Electrical and Thermal Characteristics

Table 2. Electrical and thermal characteristics for LUXEON IR Domed Line at 1000mA, Tj=25°C.

PART NUMBER

FORWARD VOLTAGE [1] (Vf)TYPICAL

TEMPERATURE

COEFFICIENT

OF FORWARD

VOLTAGE [2]

(mV/°C)

TYPICAL

TEMPERATURE

COEFFICIENT

OF PEAK

WAVELENGTH [2]

(nm/°C)

TYPICAL

THERMAL

RESISTANCE—

JUNCTION TO

SOLDER PAD

(°C/W)

TYPICAL

RISE TIME

(ns)

TYPICAL

FALL TIME

(ns)

MINIMUM TYPICAL MAXIMUM

L1I0-0850xxxx00000 2.7 3.2 3.7 -4.6 0.26 2.5 12 16

L1I0-0940xxxx00000 2.3 2.9 3.4 -2.6 0.29 2.5 12 16

Notes for Table 2:

1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 3. Absolute maximum ratings for LUXEON IR Domed Line.

PARAMETER MAXIMUM PERFORMANCE

DC Forward Current [1, 2] 1000mA

Peak Pulsed Forward Current [1, 3] 3000mA

Emitter Junction Temperature [1] (DC & Pulse) 145°C

ESD Sensitivity

(ANSI/ESDA/JEDEC JS-001-2012) Class 3B

Operating Case Temperature [1] -40°C to 125°C

Emitter Storage Temperature -40°C to 125°C

SMD Process Classication Temperature 260°C per JEDEC J-STD-020E

Allowable Reow Cycles 3

Reverse Voltage (Vreverse) LUXEON IR LEDs are not designed to be driven in reverse bias

Notes for Table 3:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. For pulse handling capability details see gure 9.

Characteristic Curves

Spectral Power Distribution Characteristics

Light Output Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON IR Domed Line at 1000mA, Tj=25°C.

Figure 2. Typical normalized radiant power vs. case temperature for LUXEON IR Domed Line at 1000mA.

Figure 3. Typical normalized radiant power vs. forward current for LUXEON IR Domed Line at Tj=25°C.

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

0500 1000 1500 2000 2500 3000

[ rewoP tnaidaR dezilamroN-]

Forward Current [mA]

850nm

940nm

Forward Current Characteristics

Figure 4. Typical forward current vs. forward voltage for LUXEON IR Domed Line at Tj=25°C.

500

1000

1500

2000

2500

3000

3500

2.4 2.8 3.23.6 4

Forward Current [mA]

Forward Voltage [V]

850nm

940nm

Wavelength Shift Characteristics

Radiation Pattern Characteristics

Figure 5. Typical peak wavelength shift vs. case temperature for LUXEON IR Domed Line at 1000mA.

Figure 6a. Typical radiation pattern for L1I0-0xxx060000000, L1I0-0xxx090000000, and L1I0-0xxx150000000 at 1000mA, Tj=25°C.

Figure 6b. Typical radiation pattern for L1I0-0xxx955800000 at 1000mA, Tj=25°C.

Figure 7a. Typical polar radiation pattern for L1I0-0xxx060000000, L1I0-0xxx090000000, and L1I0-0xxx150000000 at 1000mA, Tj=25°C.

Figure 7b. Typical polar radiation pattern for L1I0-0xxx955800000 at 1000mA, Tj=25°C.

Permissible Pulse Handling Characteristics

Figure 8. Permissible pulse handling capability for LUXEON IR Domed Line at TC=85°C for various duty cycles (D).

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2

]A[ tnerruC drawroF

Pulse Width [s]

D = 0.005

D = 0.01

D = 0.02

D = 0.05

D = 0.10

D = 0.20

D = 0.50

D = 0.75

85°C

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON IR Domed Line emitters are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A – designates radiometric power bin (example: J=900 to 950mW, N=1200 to 1300mW)

B C – designates peak wavelength bin (example: 8K=845nm to 850nm, 9H=935nm to 940nm)

D – designates forward voltage bin (example: D=2.5 to 3.0V, F=3.5 to 4.0V)

Therefore, a LUXEON IR Domed emitter with a radiometric power range of 1200 to 1300mW, peak wavelength range of 845 to

850nm and a forward voltage range of 2.5 to 3.0V has the following CAT code:

N 8 K D

Radiometric Power Bins

Table 4 lists the standard radiometric power bins for LUXEON IR Domed Line emitters. Although several bins are outlined,

product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 4. Radiometric power bin denitions for LUXEON IR Domed Line at 1000mA, Tj=25°C.

BIN RADIOMETRIC POWER [1] (mW)

MINIMUM MAXIMUM

J 900 950

K 950 1000

L 1000 1100

M 1100 1200

N 1200 1300

P 1300 1400

Q 1400 1500

R 1500 1600

Notes for Table 4:

1. Lumileds maintains a tolerance of ±7% on radiometric power measurements.

Peak Wavelength Bins

Table 5. Peak wavelength bins for LUXEON IR Domed Line at 1000mA, Tj=25°C.

BIN PEAK WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

8J 840 845

8K 845 850

8L 850 855

8M 855 860

8N 860 865

8P 865 870

8Q 870 875

9F 925 930

9G 930 935

9H 935 940

9J 940 945

9K 945 950

9L 950 955

9M 955 960

Notes for Table 5:

1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements.

Forward Voltage Bins

Table 6. Forward voltage bin denitions for LUXEON IR Domed Line at 1000mA, Tj=25°C.

BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

C 2.0 2.5

D 2.5 3.0

E 3.0 3.5

F 3.5 4.0

Notes for Table 6:

1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.

Mechanical Dimensions

Figure 9a. Mechanical dimensions for L1I0-0xxx060000000, L1I0-0xxx090000000, and L1I0-0xxx150000000.

L1I0-0xxx060000000 L1I0-0xxx090000000

L1I0-0xxx150000000

R1.40

2.96 ±0.10*

SIDE VIEW

R1.50

1.80 ±0.10*

R1.50

2.77 ±0.10*

TOP VIEW Theoretical

Optical

Center

3.70 ±0.10*

BACK VIEW

CATHODE

ANODE

2.70 (3x)

0.500.50

0.35

1.00

0.35

2.70

CATHODE

INDICATOR

Notes for Figures 9a and 9b:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 9b. Mechanical dimensions for L1I0-0xxx955800000.

Reow Soldering Guidelines

Table 7. Reow prole characteristics for LUXEON IR Domed Line.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 120 seconds

Ramp-Up Rate (TL to Tp) 3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 150 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 10 to 30 seconds

Ramp-Down Rate (Tp to TL) 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 8. Moisture sensitivity levels for LUXEON IR Domed Line.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 10. Visualization of the acceptable reow temperature prole as specied in Table 7.

Solder Pad Design

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Electrode pads are symmetric.

Figure 11. Recommended PCB solder pad layout for LUXEON IR Domed Line.

Packaging Information

Pocket Tape Dimensions

Notes for Figure 12a:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 12a. Pocket tape dimensions for L1I0-0xxx060000000.

Center of package

LUXEON IR Domed pkg outline

Stencil pattern

Solder mask opening

Notes for Figures 12b and 12c:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 12c. Pocket tape dimensions for L1I0-0xxx150000000.

Figure 12b. Pocket tape dimensions for L1I0-0xxx090000000.

Figure 12d. Pocket tape dimensions for L1I0-0xxx955800000.

1.50

0.1

0.0

1.50

0.1

0.0

12.00

0.3

0.1

8.00

2.00±0.05 SEE NOTE 2

1.75±0.1

4.00 SEE NOTE 1

5.50±0.05

SEE NOTE 2

4.82

6.11

45°

8° MAX

SECTION A-A

0.30±0.05

2.13

2.77

SECTION B-B

R0.4

0.2

DETAIL C

SCALE 8 : 1

R0.4

0.2

DETAIL D

SCALE 8 : 1

Notes for Figures 12d:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Reel Dimensions

Figure 13a. Reel dimensions for L1I0-0xxx060000000, L1I0-0xxx090000000, and L1I0-0xxx955800000.

Notes for Figure 13a:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Notes for Figure 13b:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 13b. Reel dimensions for L1I0-0xxx150000000.

DS191 LUXEON IR Domed Line

Product Datasheet 20190512

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.