[ /Title (CD74 AC74, CD74 ACT74 ) /Subject (Dual DType FlipFlop with Set and Reset PositiveEdgeTriggered) /Autho r () /Keywords (Harris Semiconductor, Advan ced CMOS , Harris Semiconductor, Advan CD74AC74, CD74ACT74 Data sheet acquired from Harris Semiconductor SCHS231 Dual D-Type Flip-Flop with Set and Reset Positive-Edge-Triggered September 1998 Features Description * Buffered Inputs The Harris CD74AC74 and CD74ACT74 dual D-type, positive edge triggered flip-flops use the Harris ADVANCED CMOS technology. These flip-flops have independent DATA, SET, RESET, and CLOCK inputs and Q and Q outputs. The logic level present at the data input is transferred to the output during the positive going transition of the clock pulse. SET and RESET are independent of the clock and are accomplished by a low level at the appropriate input. * Typical Propagation Delay (AC00) - 4.9ns at VCC = 5V, TA = 25oC, CL = 50pF * Exceeds 2kV ESD Protection MIL-STD-883, Method 3015 * SCR-Lachup-Resistant CMOS Process and Circuit Design Ordering Information * Speed of Bipolar FASTTM/AS/S with Significantly Reduced Power Consumption PART NUMBER * Balanced Propagation Delays * AC Types Feature 1.5V to 5.5V Operation and Balanced Noise Immunity at 30% of the Supply * 24mA Output Drive Current - Fanout to 15 FASTTM ICs - Drives 50 Transmission Lines TEMP. RANGE (oC) PACKAGE PKG. NO. CD74AC74E 0 to 70, -40 to 85 -55 to 125 14 Ld PDIP E14.3 CD74ACT74E 0 to 70, -40 to 85 -55 to 125 14 Ld PDIP E14.3 CD74AC74EX 0 to 70, -40 to 85 -55 to 125 14 Ld PDIP E14.3 CD74ACT74EX 0 to 70, -40 to 85 -55 to 125 14 Ld PDIP E14.3 CD74AC74M 0 to 70, -40 to 85 -55 to 125 14 Ld SOIC M14.15 CD74ACT74M 0 to 70, -40 to 85 -55 to 125 14 Ld SOIC M14.15 NOTES: 1. When ordering, use the entire part number. Add the suffix 96 to obtain the variant in the tape and reel. 2. Wafer and die for this part number is available which meets all electrical specifications. Please contact your local sales office or Harris customer service for ordering information. Pinout CD74AC74, CD74ACT74 (PDIP, SOIC) TOP VIEW 1R 1 14 VCC 1D 2 13 2R 1CP 3 12 2D 1S 4 11 2CP 1Q 5 10 2S 1Q 6 9 2Q GND 7 8 2Q CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. FASTTM is a Trademark of Fairchild Semiconductor. Copyright (c) Harris Corporation 1998 1 File Number 1881.1 CD74AC74, CD74ACT74 Functional Diagram 1R 1 2 3 1CP 1S 2R R D 1D 6 CP 1Q 1Q S 4 13 12 2D R D 11 2CP 2S 5 FF1 10 9 FF2 8 CP 2Q 2Q S TRUTH TABLE INPUTS OUTPUTS SET RESET CP D Q Q L H X X H L H L X X L H L L X X H H H H L H H L L H H H L X Q0 Q0 H (Note 5) H (Note 5) NOTES: 3. H = High level (steady state), L = Low level (steady state), X = Don't care, = Transition from Low to High level. 4. Q0 = the level of Q before the indicated input conditions were established. 5. This configuration is nonstable, that is, it will not persist when set and reset inputs return to their inactive (high) level. 2 CD74AC74, CD74ACT74 Absolute Maximum Ratings Thermal Information DC Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 6V DC Input Diode Current, IIK For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .20mA DC Output Diode Current, IOK For VO < -0.5V or VO > VCC + 0.5V . . . . . . . . . . . . . . . . . . . .50mA DC Output Source or Sink Current per Output Pin, IO For VO > -0.5V or VO < VCC + 0.5V . . . . . . . . . . . . . . . . . . . .50mA DC VCC or Ground Current, ICC or IGND (Note 6) . . . . . . . . .100mA Thermal Resistance (Typical, Note 8) JA (oC/W) PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 Maximum Junction Temperature (Plastic Package) . . . . . . . . . . 150oC Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC Operating Conditions Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC Supply Voltage Range, VCC (Note 7) AC Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5V to 5.5V ACT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V DC Input or Output Voltage, VI, VO . . . . . . . . . . . . . . . . . 0V to VCC Input Rise and Fall Slew Rate, dt/dv AC Types, 1.5V to 3V . . . . . . . . . . . . . . . . . . . . . . . . . 50ns (Max) AC Types, 3.6V to 5.5V . . . . . . . . . . . . . . . . . . . . . . . . 20ns (Max) ACT Types, 4.5V to 5.5V. . . . . . . . . . . . . . . . . . . . . . . 10ns (Max) CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 6. For up to 4 outputs per device, add 25mA for each additional output. 7. Unless otherwise specified, all voltages are referenced to ground. 8. JA is measured with the component mounted on an evaluation PC board in free air. DC Electrical Specifications TEST CONDITIONS PARAMETER -40oC TO 85oC 25oC -55oC TO 125oC SYMBOL VI (V) IO (mA) VCC (V) MIN MAX MIN MAX MIN MAX UNITS VIH - - 1.5 1.2 - 1.2 - 1.2 - V AC TYPES High Level Input Voltage Low Level Input Voltage High Level Output Voltage VIL VOH - VIH or VIL - 3 2.1 - 2.1 - 2.1 - V 5.5 3.85 - 3.85 - 3.85 - V 1.5 - 0.3 - 0.3 - 0.3 V 3 - 0.9 - 0.9 - 0.9 V 5.5 - 1.65 - 1.65 - 1.65 V -0.05 1.5 1.4 - 1.4 - 1.4 - V -0.05 3 2.9 - 2.9 - 2.9 - V -0.05 4.5 4.4 - 4.4 - 4.4 - V -4 3 2.58 - 2.48 - 2.4 - V -24 4.5 3.94 - 3.8 - 3.7 - V -75 (Note 9, 10) 5.5 - - 3.85 - - - V -50 (Note 9, 10) 5.5 - - - - 3.85 - V 3 CD74AC74, CD74ACT74 DC Electrical Specifications (Continued) TEST CONDITIONS PARAMETER Low Level Output Voltage -40oC TO 85oC 25oC -55oC TO 125oC SYMBOL VI (V) IO (mA) VCC (V) MIN MAX MIN MAX MIN MAX UNITS VOL VIH or VIL 0.05 1.5 - 0.1 - 0.1 - 0.1 V 0.05 3 - 0.1 - 0.1 - 0.1 V 0.05 4.5 - 0.1 - 0.1 - 0.1 V 12 3 - 0.36 - 0.44 - 0.5 V 24 4.5 - 0.36 - 0.44 - 0.5 V 75 (Note 9, 10) 5.5 - - - 1.65 - - V 50 (Note 9, 10) 5.5 - - - - - 1.65 V II VCC or GND - 5.5 - 0.1 - 1 - 1 A ICC VCC or GND 0 5.5 - 4 - 40 - 80 A High Level Input Voltage VIH - - 4.5 to 5.5 2 - 2 - 2 - V Low Level Input Voltage VIL - - 4.5 to 5.5 - 0.8 - 0.8 - 0.8 V High Level Output Voltage VOH VIH or VIL -0.05 4.5 4.4 - 4.4 - 4.4 - V -24 4.5 3.94 - 3.8 - 3.7 - V -75 (Note 9, 10) 5.5 - - 3.85 - - - V -50 (Note 9, 10) 5.5 - - - - 3.85 - V 0.05 4.5 - 0.1 - 0.1 - 0.1 V 24 4.5 - 0.36 - 0.44 - 0.5 V 75 (Note 9, 10) 5.5 - - - 1.65 - - V 50 (Note 9, 10) 5.5 - - - - - 1.65 V Input Leakage Current Quiescent Supply Current, FF ACT TYPES Low Level Output Voltage Input Leakage Current Quiescent Supply Current, FF Additional Supply Current per Input Pin TTL Inputs High 1 Unit Load VOL VIH or VIL II VCC or GND - 5.5 - 0.1 - 1 - 1 A ICC VCC or GND 0 5.5 - 4 - 40 - 80 A ICC VCC -2.1 - 4.5 to 5.5 - 2.4 - 2.8 - 3 mA NOTES: 9. Test one output at a time for a 1-second maximum duration. Measurement is made by forcing current and measuring voltage to minimize power dissipation. 10. Test verifies a minimum 50 transmission-line-drive capability at 85oC, 75 at 125oC. ACT Input Load Table INPUT UNIT LOAD D 0.53 R, S 0.58 CP 1 NOTE: Unit load is ICC limit specified in DC Electrical Specifications Table, e.g., 2.4mA max at 25oC. 4 CD74AC74, CD74ACT74 Prerequisite For Switching Function PARAMETER -40oC TO 85oC -55oC TO 125oC SYMBOL VCC (V) MIN MAX MIN MAX UNITS tSU 1.5 39 - 44 - ns 3.3 (Note 11) 4.3 - 4.9 - ns 5 (Note 12) 3.1 - 3.5 - ns 1.5 0 - 0 - ns 3.3 0 - 0 - ns 5 0 - 0 - ns 1.5 30 - 34 - ns 3.3 4.1 - 4.7 - ns 5 2.4 - 2.7 - ns 1.5 44 - 50 - ns 3.3 4.9 - 5.6 - ns 5 3.5 - 4 - ns 1.5 49 - 56 - ns 3.3 5.5 - 6.3 - ns 5 3.9 - 4.5 - ns 1.5 10 - 9 - MHz 3.3 90 - 79 - MHz 5 125 - 110 - MHz AC TYPES Data to CP Setup Time Hold Time tH Removal Time, R, S to CP tREM Pulse Width, R, S tW Pulse Width, CP tW CP Frequency fMAX ACT TYPES Data to CP Setup Time tSU 5 (Note 12) 3.5 - 4 - ns Hold Time tH 5 0 - 0 - ns tREM 5 2.4 - 2.7 - ns Pulse Width, R, S tW 5 4.4 - 5 - ns Pulse Width, CP tW 5 5 - 5.7 - ns fMAX 5 97 - 85 - MHz Removal Time, R, S to CP CP Frequency NOTES: 11. 3.3V Min at 3.6V. 12. 5V Min at 4.5V. Switching Specifications Input tr, tf = 3ns, CL = 50pF (Worst Case) -40oC TO 85oC PARAMETER -55oC TO 125oC SYMBOL VCC (V) MIN TYP MAX MIN TYP MAX UNITS tPLH, tPHL 1.5 - - 114 - - 125 ns 3.3 (Note 14) 3.6 - 12.7 3.5 - 14 ns 5 (Note 15) 2.6 - 9.1 2.5 - 10 ns AC TYPES Propagation Delay, CP to Q, Q 5 CD74AC74, CD74ACT74 Switching Specifications Input tr, tf = 3ns, CL = 50pF (Worst Case) (Continued) -40oC TO 85oC -55oC TO 125oC PARAMETER SYMBOL VCC (V) MIN TYP MAX MIN TYP MAX UNITS Propagation Delay, R, S to Q, Q tPLH 1.5 - - 120 - - 132 ns 3.3 3.8 - 13.4 3.7 - 14.7 ns 5 2.7 - 9.5 2.6 - 10.5 ns 1.5 - - 131 - - 144 ns 3.3 4.1 - 14.6 4 - 16.1 ns 5 3 - 10.4 2.9 - 11.5 ns CI - - - 10 - - 10 pF CPD (Note 16) - - 55 - - 55 - pF Propagation Delay, CP to Q, Q tPHL tPLH 5 (Note 15) 2.5 - 8.6 2.4 - 9.5 ns Propagation Delay, R, S to Q, Q tPLH 5 3 - 10.5 2.9 - 11.5 ns tPHL 5 3.2 - 11.4 3.1 - 12.5 ns CI - - - 10 - - 10 pF CPD (Note 16) - - 55 - - 55 - pF tPHL Input Capacitance Power Dissipation Capacitance ACT TYPES Input Capacitance Power Dissipation Capacitance NOTES: 13. Limits tested 100%. 14. 3.3V Min at 3.6V, Max at 3V. 15. 5V Min at 5.5V, Max at 4.5V. 16. CPD is used to determine the dynamic power consumption per flip-flop. PD = CPDVCC2 fi + (CLVCC2 fo) + VCC ICC where fi = input frequency, fo = output frequency, CL = output load capacitance, VCC = supply voltage. INPUT LEVEL R (S) VS VS GND INPUT LEVEL CP VS GND VS tW Q OR Q INPUT tPLH tPHL VS VS tREM tW VS CP VS tPLH (Q) Q Q VS (Q) FIGURE 1. FIGURE 2. INPUT LEVEL D VS VS GND INPUT LEVEL VS tH(L) tSU(L) CP VS GND FIGURE 3. 6 VS tH(H) tSU(H) VS CD74AC74, CD74ACT74 OUTPUT RL (NOTE) 500 DUT OUTPUT LOAD CL 50pF NOTE: For AC Series Only: When VCC = 1.5V, RL = 1k. CD74AC CD74ACT VCC 3V Input Switching Voltage, VS 0.5 VCC 1.5V Output Switching Voltage, VS 0.5 VCC 0.5 VCC Input Level FIGURE 4. PROPAGATION DELAY TIMES 7 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated