Model 651 Mid Range Torque Watch Gauge Series DESCRIPTION The 651 mid-range torque watch gage series provides accurate The 651 Series utilizes a calibrated spring, shaft, and pointer measurement of low static torque. A 1/4 inch keyed chuck assembly within a rugged steel and aluminum housing. The unit provides a simple means of coupling to the device under can measure torque in either a clockwise or counterclockwise measurement. direction. Internal stainless steel rotation stops help prevent damage from over-torque up to two times the normal range. FEATURES * 2.5 gm-cm to 2.8 k gm-cm [0.05 in-oz to 40 in-oz] [0.5 N-mm to 265 N-mm ] capacity * 2 % accuracy * 1/4-in keyed chuck standard * Dial indication * Overload protection Model 651 Mid Range Torque Watch Gauge Series Standard Metric Model Order codes oz-in Model Order codes gm-cm 651C-1 TQ651C1 0.05 to 1.2 651C-1M TQ651C1M 2.8 - 80 651C-2 TQ651C2 1 to 20 651C-2M TQ651C2M 50 - 1.2 k 651C-3 TQ651C3 2 to 40 651C-3M TQ651C3M 150 - 2.8 k 651X-2 TQ651X2 0.1 to 2.4 651X-2M TQ651X2M 5 - 150 651X-3 TQ651X3 0.25 to 5 651X-3M TQ651X3M 10 - 300 651X-4 TQ651X4 0.5 to 10 651X-4M TQ651X4M 25 - 600 System International Model Order codes N-mm Accuracy 651C-1SI TQ651C1SI 0.5 to 9 2 % 651C-2SI TQ651C2SI 10 to 140 2 % 651C-3SI TQ651C3SI 15 to 285 2 % 651X-2SI TQ651X2SI 1 to 18 2 % 651X-3SI TQ651X3SI 2 to 36 2 % 651X-4SI TQ651X4SI 5 to 70 2 % Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008787-1-EN IL50 GLO June 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved.