EVAL-AD5678DBZ User Guide UG-987 One Technology Way * P.O. Box 9106 * Norwood, MA 02062-9106, U.S.A. * Tel: 781.329.4700 * Fax: 781.461.3113 * www.analog.com Evaluation Board for the AD5678 4 x 12-Bit and 4 x 16-Bit, Octal-Channel, Voltage Output DAC FEATURES GENERAL DESCRIPTION Full featured evaluation board in conjunction with the nanoDAC(R) motherboard (EVAL-MBnanoDAC-SDZ) On-board references Various link options PC control in conjunction with Analog Devices, Inc., system demonstration platform (SDP) This user guide details the operation of the evaluation board for the AD5678 octal channel, voltage output, digital-to-analog converter (DAC). PACKAGE CONTENTS For full data, see the AD5678 data sheet, which must be consulted in conjunction with this user guide when using the evaluation board. The evaluation board is designed to help users quickly prototype new AD5678 circuits and reduce design time. The AD5678 operates from a single 2.7 V to 5.5 V supply. EVAL-AD5678DBZ evaluation board EVAL-MBnanoDAC-SDZ motherboard The evaluation board interfaces to the USB port of a PC via the SDP-B board. Software is available for download from the EVALAD5678DBZ evaluation board page to allow the user to program the AD5678. SOFTWARE NEEDED EVAL-AD5678DBZ evaluation software HARDWARE NEEDED EVAL-SDP-CB1Z (SDP-B) board, must be purchased separately DOCUMENTS NEEDED Electronic version of the AD5678 data sheet Electronic version of the EVAL-AD5678DBZ user guide 14523-001 EVAL-AD5678DBZ, EVAL-MBnanoDAC-SDZ, AND SDP-B BOARDS Figure 1. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. B | Page 1 of 13 UG-987 EVAL-AD5678DBZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Link Options ..................................................................................3 Package Contents .............................................................................. 1 Evaluation Board Software Quick Start Procedures .....................4 Software Needed ............................................................................... 1 Installing the Software ..................................................................4 Hardware Needed ............................................................................. 1 Running the Software ...................................................................4 Documents Needed .......................................................................... 1 Software Operation .......................................................................5 General Description ......................................................................... 1 Evaluation Board Schematics and Artwork ...................................7 EVAL-AD5678DBZ, EVAL-MBnanoDAC-SDZ, and SDP-B Boards................................................................................................. 1 EVAL-MBnanoDAC-SDZ Motherboard ...................................7 Revision History ............................................................................... 2 Ordering Information .................................................................... 12 Evaluation Board Hardware ............................................................ 3 Bill of Materials ........................................................................... 12 EVAL-AD5678DBZ Daughter Board ...................................... 10 Motherboard Power Supplies...................................................... 3 REVISION HISTORY 5/2018--Rev. A to Rev. B Change to Table 5 ........................................................................... 12 11/2017--Rev. 0 to Rev. A Change to Table 5 ........................................................................... 12 3/2017--Revision 0: Initial Version Rev. B | Page 2 of 13 EVAL-AD5678DBZ User Guide UG-987 EVALUATION BOARD HARDWARE MOTHERBOARD POWER SUPPLIES LINK OPTIONS The EVAL-MBnanoDAC-SDZ motherboard supports single and dual power supplies. A number of link options are incorporated in the EVALMBnanoDAC-SDZ and must be set for the required operating conditions before using the board. Table 2 describes the positions of the links to control the evaluation board via the SDP-B board using a PC and external power supplies. The functions of these link options are described in detail in Table 3. The positions listed in Table 2 and Table 3 match the evaluation board imprints (see Figure 12). The EVAL-AD5678DBZ evaluation board can be powered either from the SDP port or externally by the J5 and J6 connectors, as described in Table 1. Both the AGND and DGND inputs are provided on the board. The AGND and DGND planes are connected at one location on the EVAL-MBnanoDAC-SDZ. It is recommended that AGND and DGND not be connected elsewhere in the system to avoid ground loop problems. All supplies are decoupled to ground with 10 F tantalum and 0.1 F ceramic capacitors. Table 1. Power Supply Connectors Connector No. J5, Pin 1 (J5-1) Label VDD J5, Pin 2 (J5-2) J5, Pin 3 (J5-3) AGND VSS J6, Pin 1 (J6-1) J6, Pin 2 (J6-2) VLOGIC DGND Voltage Analog positive power supply, VDD. Single supply 5 V, dual supply 5 V. Analog ground. Analog negative power supply, VSS. Dual supply -5 V. Digital supply from 1.8 V to VDD. Digital ground. Table 2. Link Options Setup for SDP-B Control (Default) Link No. REF1 REF2 REF3 REF4 LK5 LK6 LK7 Position EXT EXT EXT EXT C 3.3V B Table 3. Link Functions Link Number REF1 to REF4 LK5 LK6 LK7 Function These links select the reference source. Position EXT selects an off-board voltage reference via the appropriate EXT_REF_x connector. Position VDD selects VDD as the reference source. Position 4.096V selects the on-board 4.096 V reference as the reference source. Position 2.5V selects the on-board 2.5 V reference as the reference source. Position 5V selects the on-board 5 V reference as the reference source, VDD = 5.5 V. This link selects the positive DAC analog voltage source. Position A selects the internal voltage source from the SDP-B board. Position B selects the internal voltage source 3.3 V from the ADP121 on the motherboard. Position C selects an external supply voltage, VDD. This link selects the VLOGIC voltage source. Position 3.3V selects the digital voltage source from the SDP-B board, 3.3 V. Position VLOGIC selects an external digital supply voltage, VLOGIC. This link selects the negative DAC analog voltage source. Position A selects VSS. Position B selects AGND. Rev. B | Page 3 of 13 UG-987 EVAL-AD5678DBZ User Guide EVALUATION BOARD SOFTWARE QUICK START PROCEDURES INSTALLING THE SOFTWARE The EVAL-AD5678DBZ evaluation software is compatible with Windows(R) Vista (64-bit/32-bit), and Windows 7 (64-bit/32-bit). 10954-003 The software must be installed before connecting the SDP-B board to the USB port of the PC to ensure that the SDP-B board is recognized by the PC. 1. 2. 3. 4. 5. Start the Windows operating system. Download the installation software from the EVAL-AD5678DBZ evaluation board page. Run the setup.exe file from the installer folder if it does not open automatically. After installation is completed, power up the evaluation board as described in the Motherboard Power Supplies section. Connect the evaluation board to the SDP-B board and the SDP-B board into the PC using the USB cable included in the evaluation kit. When the software detects the evaluation board, click through any dialog boxes that appear to finalize the installation. 14523-002 To install the software, take the following steps: Figure 2. Connectivity Error RUNNING THE SOFTWARE To run the program, take the following steps: 1. 2. 3. 4. Connect the evaluation board to the SDP-B board and connect the USB cable between the SDP-B board and the PC. Power up the evaluation board as described in the Motherboard Power Supplies section. From the Start menu, click All Programs, Analog Devices, AD5678 Evaluation Software. If the SDP-B board is not connected to the USB port when the software is launched, a connectivity error displays (see Figure 2). Connect the evaluation board to the USB port of the PC and wait a few seconds. When the SDP-B board is detected, the display is updated (see Figure 3). 14523-003 Alternatively, the software can be used without an evaluation board. The software runs in simulation mode displaying expected outputs based on the input data. The main window of the AD5678 evaluation software then opens, as shown in Figure 4. Figure 3. Hardware Select Rev. B | Page 4 of 13 UG-987 14523-004 EVAL-AD5678DBZ User Guide Figure 4. AD5678 Evaluation Software Main Window SOFTWARE OPERATION Power-Down Control The software for the AD5678 allows the user to program values to the DAC REGISTER of the DAC. Each DAC can be powered down individually. Click the POWERDOWN LOGIC blue progressive disclosure option to access the Powerdown Configuration window, as shown in Figure 5. The selected DAC can operate in normal operation or one of the three different power-down, pull-down termination options. When the power-down setting for each DAC is selected, click OK to write the appropriate values to the AD5678. Write to Input Register Click Write to Input Register to load the code of the input data control to the input register of the selected DAC in the DAC selection box. Update DAC Register from Input Register Click Update DAC Register from Input Register to copy the value in the input register to the corresponding DAC register. The DAC outputs are automatically updated with the appropriate voltage. Write to Input and DAC Registers Click Write to Input and DAC Registers to load the code of the input data control to the input register and DAC register of the selected DAC. The DAC outputs are automatically updated with the appropriate voltage. LDAC Control Alternatively, the LDAC pin can be set to logic high or logic low by selecting the corresponding LDAC HIGH or LDAC LOW option. Rev. B | Page 5 of 13 14523-005 Click Pulse LDAC to bring the LDAC pin low and then back high. This action copies the data from the input register to the DAC register, and the output updates accordingly. Figure 5. Powerdown Configuration Window UG-987 EVAL-AD5678DBZ User Guide LDAC Mask Register The DAC has an on-chip reference with an internal gain of 2. Click the blue progressive option on the REFERENCE INPUT block to access the Reference Input window, as shown in Figure 6, which allows the user to select between the on-chip reference or external reference voltage. Each DAC can be configured to respond to or override the LDAC pin settings in the LDAC control. Click the blue progressive disclosure option on the INTERFACE LOGIC block to access the LDAC Register window, as shown in Figure 7. When the LDAC selections are completed, click OK to write the appropriate values to the AD5678. The LDAC REGISTER indicator lights up accordingly when an LDAC mask of a DAC is enabled. 14523-006 Reference Control Figure 6. Reference Input Window 14523-007 When using an external reference, write the actual value of the reference voltage in the External Reference (V) input box to make sure that the software reflects the voltage output correctly. Figure 7. LDAC Register Window Rev. B | Page 6 of 13 EVAL-AD5678DBZ User Guide UG-987 EVALUATION BOARD SCHEMATICS AND ARTWORK EVAL-MBnanoDAC-SDZ MOTHERBOARD +5V L1 R1 BEAD 1.6 +3.3V USB_VBUS J10 C11 + C10 C7 + 4.7F EXT_VDD 0.1F 10F DGND R16 DNP +5V +3.3V U2 ADP121-AUJZ33 R15 1 100 3 C3 1F 2 DGND VIN VOUT EN NC 5 GAIN PD 4 100 100 R13 R14 C4 1F GND DGND +5V +3.3V LK5 A VDD B EXT_VDD J5-1 + C8 0.1F C C9 10F EXT_VDD CS DB1 DB3 DB5 J5-2 DB7 DB9 DB11 LK7 EXT_VSS J5-3 A VSS B C2 0.1F C1 10F + USB_VBUS 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 RESET_IN UART_RX GND RESET_OUT SDP EEPROM_A0 STANDARD NC CONNECTOR NC NC GND NC NC TMR_C* TIMERS TMR_A GPIO6 GND GENERAL GPIO4 INPUT/OUTPUT GPIO2 GPIO0 SCL_1 I2C SDA_1 GND SPI_SEL1/SPI_SS SPI_SEL_C SPI SPI_SEL_B BMODE1 UART_TX GND SLEEP WAKE NC NC NC GND NC CLK_OUT TMR_D TMR_B GPIO7 GND GPIO5 GPIO3 GPIO1 SCL_0 SDA_0 GND SPI_CLK SPI_MISO SPI_MOSI SPI_SEL_A GND GND SPORT_INT SPORT_TSCLK SPI_D3* SPORT_DT0 SPI_D2* SPORT SPORT_TFS SPORT_DT1 SPORT_RFS SPORT_DR1 SPORT_DR0 SPORT1_TDV* SPORT_RSCLK SPORT0_TDV* GND GND PAR_CLK PAR_FS1 PAR_FS2 PAR_FS3 PAR_A0 PAR_A1 PAR_A2 PAR_A3 GND GND PAR_INT PAR_CS PAR_WR PAR_RD PAR_D0 PAR_D1 PARALLEL PAR_D2 PAR_D3 PORT PAR_D4 PAR_D5 GND GND PAR_D6 PAR_D7 PAR_D8 PAR_D9 PAR_D10 PAR_D11 PAR_D12 PAR_D13 GND PAR_D14 PAR_D15 GND PAR_D16* PAR_D17* PAR_D18* PAR_D19* PAR_D20* PAR_D21* PAR_D22* PAR_D23* GND GND VIO(+3.3V) USB_VBUS GND GND GND GND NC NC *NC ON BLACKFIN SDP NC VIN 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 R2 100k R4 DNP U3 24LC32 1 2 3 4 R3 100k A0 A1 A2 VSS VCC WP SCL SDA 8 7 6 5 +3.3V DGND DGND DGND R5 R6 R7 R8 R9 R10 100 100 100 100 100 100 CLR LDAC R11 R12 100 100 SCL SDA SCLK SDO SDIN SYNC WR DB0 DB2 DB4 DB6 DB8 DB10 DGND AGND DGND +3.3V LK6 DGND VLOGIC A J6-2 DGND VLOGIC B C6 10F GND + C5 0.1F 14523-008 J6-1 DGND DGND Figure 8. EVAL-MBnanoDAC-SDZ Motherboard SDP-B Connector and Power Supply Rev. B | Page 7 of 13 UG-987 EVAL-AD5678DBZ User Guide +5V +2.5V +2.5V +4.096V +4.096V REF198 VOUT 6 +2_5VREF VDD U5 ADR431BRZ 7 COMP 5 TRIM 5 C15 GND D +4_096VREF EX_REF_1 VDD C 6 +5VREF 2 VDD 3 VS OUTPUT SLEEP U6 C16 1F TRIM GND 6 +4_096VREF C17 1F GND 4 4 REF1 E +2_5VREF VOUT U4 ADR445ARMZ 1F 4 +5VREF VIN B A REF3 REF2 E +5VREF +2_5VREF D +4_096VREF EX_REF_2 VDD C VREF_1 B A VREF1 +5VREF A +2_5VREF B +4_096VREF EX_REF_3 VDD D VREF_2 VREF2 REF4 +5VREF C B +4_096VREF EX_REF_4 VDD D VREF3 E A +2_5VREF VREF_3 VREF_4 C VREF4 E Figure 9. EVAL-MBnanoDAC-SDZ Motherboard Reference Voltage Selector Circuit DAUGHTER BOARD CONNECTOR SDIN SDO SCLK SYNC SCL LDAC CLR PD GAIN SDA J2 2 4 6 8 10 LDAC CLR PD GAIN SDA SPI PMOD CONNNECTOR DB6 DB7 DB8 DB9 DB10 DB11 CS J1 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 DB0 DB1 DB2 DB3 DB4 DB5 WR J3-6 J3-5 J3-4 J3-3 J3-2 J3-1 AGND DGND J4-1 VOUT_0 J4-2 VOUT_1 J4-3 VOUT_2 J4-4 VOUT_3 J4-5 VOUT_4 J4-6 VOUT_5 J4-7 VOUT_6 J4-8 VOUT_7 J8-1 J8-2 J8-3 J8-4 J8-5 J8-6 GPIO PMOD CONNNECTOR J7-1 J7-2 J7-3 J7-4 J7-5 J7-6 SYNC SDIN SDO SCLK DGND VLOGIC PD LDAC GAIN CLR DGND VLOGIC I2C PMOD CONNNECTOR J9 VDD VREF4 VREF3 VREF2 VREF1 VLOGIC SCL SDA DGND VLOGIC 1 3 5 7 2 4 6 8 SCL SDA DGND VLOGIC 14523-010 1 3 5 7 9 SDIN SDO SCLK SYNC SCL Figure 10. EVAL-MBnanoDAC-SDZ Motherboard Connectors to Daughter Board and Serial Interface VOUT_4 VOUT_4 2 VDD VOUT_0 3 2 VOUT_0 7 V+ AD8655 OP V- - 4 6 VOUT_2 VOUT_2 3 2 VSS VOUT_5 + 1 U7-A - AD8616ARZ VOUT_5 V+ VDD 2 7 + V- V+ AD8655 OP V- - 4 VSS 6 + 7 U10-B - AD8608ARUZ 8 U7-C VOUT_1 5 6 VDD 3 + 1 U10-A AD8608ARUZ + U11 VOUT_1 3 4 VOUT_3 AD8616ARZ VOUT_3 5 6 + 7 U7-B - AD8616ARZ VOUT_6 VOUT_6 10 9 + 8 U10-C - AD8608ARUZ U12 VSS VOUT_7 VOUT_7 12 13 Figure 11. EVAL-MBnanoDAC-SDZ Motherboard Output Amplifier Circuit Rev. B | Page 8 of 13 + 14 U10-D - AD8608ARUZ 14523-009 VIN 2 14523-011 VDD 2 UG-987 14523-012 EVAL-AD5678DBZ User Guide 14523-013 Figure 12. EVAL-MBnanoDAC-SDZ Motherboard Component Placement Figure 13. EVAL-MBnanoDAC-SDZ Motherboard Top Side Routing Rev. B | Page 9 of 13 EVAL-AD5678DBZ User Guide 14523-014 UG-987 Figure 14. EVAL-MBnanoDAC-SDZ Motherboard Bottom Side Routing EVAL-AD5678DBZ DAUGHTER BOARD A VDD J2 VOUT_0 C1 + C9 C10 R1 DNP R2 DNP B 0.1F 10F 1 3 5 7 9 SDIN SDO SCLK SYNC SCL DNP 2 4 6 8 10 LDAC CLR PD GAIN SDA VOUT_1 5 DNP DNP DGND E 11 VOUT_1 J4-3 VOUT_2 J4-4 VOUT_3 J4-5 VOUT_4 J4-6 VOUT_5 J4-7 VOUT_6 J4-8 VOUT_7 VOUT_4 7 C5 10 J3-1 R4 J3-3 6 C4 J3-2 12 VOUT_3 VOUT_0 J4-2 R5 DNP R6 DNP R7 DNP R8 DNP DNP U1 AD5678BRUZ-2 F VOUT_5 C6 DNP G VOUT_6 C7 DNP H VOUT_7 C8 DNP Figure 15. EVAL-AD5678DBZ Daughter Board Schematics Rev. B | Page 10 of 13 14523-015 VOUT_H D J4-1 VLOGIC VOUT_F VOUT_G DNP VREF1 VOUT_E DIN DNP DB0 DB1 DB2 DB3 DB4 DB5 WR J3-4 SCLK R3 2 4 6 8 10 12 14 16 VREF3 VOUT_D 13 C3 J1 1 3 5 7 9 11 13 15 J3-6 VOUT_B 4 DB6 DB7 DB8 DB9 DB10 DB11 CS VREF2 SDIN 15 VOUT_A VOUT_C SYNC AGND VOUT_2 J3-5 SCLK 16 CLR C VDD SYNC 2 LDAC GND CLR 9 14 LDAC 1 C2 DNP VREF4 VDD VREFIN/OUT 8 3 VREF1 UG-987 14523-0176 EVAL-AD5678DBZ User Guide 14523-018 Figure 16. EVAL-AD5678DBZ Daughter Board Component Placement 14523-017 Figure 17. EVAL-AD5678DBZ Daughter Board Top Side Routing Figure 18. EVAL-AD5678DBZ Daughter Board Bottom Side Routing Rev. B | Page 11 of 13 UG-987 EVAL-AD5678DBZ User Guide ORDERING INFORMATION BILL OF MATERIALS Table 4. EVAL-MBnanoDAC-SDZ Motherboard Qty 4 7 2 1 4 1 1 3 1 1 1 1 1 1 1 2 4 1 2 11 1 1 1 1 1 1 1 2 1 2 Reference Designator C1, C6, C7, C9 C2, C5, C8, C10, C15, C16, C17 C3, C4 C11 EXT_REF_1 to EXT_REF_4 J1 J2 J3, J7, J8 J4 J5 J6 J9 J10 L1 LK5 LK6, LK7 REF1 to REF4 R1 R2, R3 R5 to R15 U2 U3 U4 U5 U6 U7 U10 U11, U12 Description 6.3 V, tantalum capacitor (Case A), 10 F, 20% 50 V, X7R ceramic capacitor, 0.1 F, 10% 10 V, X5R, ceramic capacitor, 1 F, 10% 6.3 V, tantalum capacitor (Case A), 4.7 F, 20% Straight printed circuit board (PCB) mount SMB jack, 50 Header, 2.54 mm, 2 x 8-way Header, 2.54 mm, 2 x 5-way Header, 2.54 mm, 1 x 6-way Header, 2.54 mm, 1 x 8-way 3-pin terminal block 2-pin terminal block Header, 2.54 mm, 2 x 4-way 120-way connector Inductor, SMD, 600 6-pin (3 x 2) 0.1", header and shorting block 4-pin (2 x 2) 0.1", header and shorting block 10-pin (5 x 2) 0.1", header and shorting block Resistor, surge, 1.6 , 1%, 0603 SMD resistor, 100 k, 1%, 0603 SMD resistor, 100 , 1%, 0603 3.3 V linear regulator 32 kb I2C serial EEPROM 5 V reference, MSOP Ultralow noise XFET voltage reference 4.096 V reference Dual op amp Quad op amp Op amp Supplier/Part Number1, 2 FEC/1190107 FEC/1759122 GRM188R61A105KA61D FEC/1432350 FEC/1206013 FEC/2308428 FEC/9689583 FEC/9689508 FEC/1766172 FEC/1667472 FEC/151789 FEC/1667509 FEC/1324660 FEC/9526862 FEC/148-535 and 150-411 (36-pin strip) FEC/148-535 and 150-411 (36-pin strip) FEC/1022227 and 150-411 FEC/1627674 FEC/9330402 FEC/9330364 Analog Devices/ADP121-AUJZ33R7 FEC/1331330 Analog Devices/ADR445ARMZ Analog Devices/ADR431BRZ Analog Devices/REF198ESZ Analog Devices/AD8616ARZ Analog Devices/AD8608ARMZ Analog Devices/AD8655ARMZ FEC refers to Farnell Electronic Component Distributors. GRM refers to Murata Manufacturing Company. Table 5. EVAL-AD5678DBZ Daughter Board Qty 8 8 1 1 1 1 1 1 8 1 1 Reference Designator A to H C1 to C8 C9 C10 J1 J2 J3 J4 R1 to R8 U1 Description Red test point Not applicable 50 V, X7R, ceramic capacitor 6.3 V, tantalum capacitor (Case A) 16-pin (2 x 8) header 10-pin (2 x 5) straight header, 2.54 mm pitch 6-pin (1 x 6) straight header, 2.54 mm pitch Header, 2.54 mm, PCB, 1 x 8-way Not applicable Octal DAC, 4 x 12-bit DACs, 4 x 16-bit DACs FEC refers to Farnell Electronic Component Distributors. Rev. B | Page 12 of 13 Supplier/Part Number1 Do not insert Not inserted FEC/1759122 FEC/1190107 FEC/2308428 inserted from solder side FEC/9689583 inserted from solder side FEC/9689508 inserted from solder side FEC/1766172 inserted from solder side Not inserted Analog Devices/AD5678BRUZ-1 EVAL-AD5678DBZ User Guide UG-987 NOTES I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors). ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the "Evaluation Board"), you are agreeing to be bound by the terms and conditions set forth below ("Agreement") unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you ("Customer") and Analog Devices, Inc. ("ADI"), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term "Third Party" includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED "AS IS" AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER'S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI'S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. (c)2017-2018 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG14523-0-5/18(B) Rev. B | Page 13 of 13