55
www.ittcannon.com
Dimensions shown in mm
S pecifications and dimens ions subject to change
Cannon APD / ISO 15170 Connectors Technical Data, 37-way*
*Further information on request
APD 37-way is a highly reliable, cost effective multi-pin connector with
signal contacts (multi-layout power / signal on demand). It offers wire-
to-wire and wire-to-board connection solutions. According to ISO
15170, the connector is dedicated for harsh environmental usage.
Various customer specific designs (e.g. different coding) are possible.
Electrical Data
Mechanical Data
Environmental Data (acc. ISO 15170)
Materials List
Operating Voltage 48 VDC*
Operating Current see derating curve
Contact Resistance 5 mΩmax.
Voltage Proof 1000 VAC, 60 seconds
Insulation Resistance 10 MΩmin.
Durability 20 Mating Cycles
Coupling Torque 4 Nmmax.
Static Load, free connector 250 N axial, 150 N lat. (ISO 15170-2, Sec. 4.5)
Dynamic Impact Free fall with cable (EN 61984 Sec. A9, height 1m)
Temperature Range -40 °C upto 125 °C (ISO 15170-2, Sec. 6.4)
Humidity Range up to 95 % r.h. (ISO 15170-2, Sec. 6.4)
Sealing IP67 and IP 69K (DIN EN 60529)*
Salt Spray 96 h, 35 °C(ISO15170-2, Sec. 6.2)
Industrial Climate SO2, 0,67 % (ISO 15170-2, Sec. 6.3)
Fluid Compatibility Brakefluid, ATF, fuel, .. (ISO 15170-2, Sec. 6.6)*
Vibration Resistance Sine, 300m/s², 3 x 100h, RT and 120°C (ISO 15170-2)*
Housing Parts PA 66 GF
Sealing Parts FKM (alternative FVMQ)
Coupling Nut PA 6 GF
Contacts CopperAlloy, AuorSnplated*
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
56
Cannon APD / ISO 15170 Connectors Plug, 37-way
Plug, 37-way
Order No. Designation Code Color
121583-0058 APD-1BS37 1 black (RAL 9005)
Socket crimp contacts see page 58.
Accessories, see pages 58 and 59.
View on Mating Face
Note: Additional coding on demand.
Packaging unit 100 pcs.
Coding 37-way layout
4
1
9
15
22
28
33
37
34
29
23
16
10
5
1
34
33
28
22
15
5
4
9
10
23
29
37
ø50.8
ø49.4
32
34.2
40
1
34
29
23
10
5
4
9
15
28
33
37
0
2
4
6
8
10
12
20 30 40 50 60 70 80 90 100 110 120 130
Ambient Temperature [°C]
Current [A]
1: 1,0mm²
2: 0,75mm²
1
2
Derating Curve
57
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon APD / ISO 15170 Connectors Flange Receptacle, 37-way
ø40
ø44.3
4
8
1
6
22
28
33
37
1
6
10
16
23
29
34
Flange Receptacle, 37-way
Pin crimp contacts see page 58.
Accessories, see pages 58 and 59.
Note: Requires use of alignment disc.
View on Mating Face
Note: Additional coding on demand.
Packaging unit 100 pcs.
Coding 37-way layout
Panel Cut Out Flange for all Flange Receptacles
ø40
ø44.3
37± 0.1
41.5 ± 0.05
47
ø34.5
Order No. Designation Code Color Comment
249-8619-017 APD-1AP37-R 1 black (RAL 9005) wtih O-ring
248-8653-026 APD-1AP37 1 black (RAL 9005) without O-ring
Note: Dimension if used as version with radial o-ring seal (249-8619-017).
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
58
Cannon APD / ISO 15170 Connectors Contacts / Accessories, 37-way
Socket Contacts
0,35 - 0,75 mm2APK-SA16A07-002-C 121668-0220
0,75 - 1,50 mm2APK-SA16A15-002-C 121668-0222
0,35 - 0,75 mm2APK-SA16G07-002-C 121668-0266
0,75 - 1,50 mm2APK-SA16G15-002-C 121668-0268
0,35 - 0,75 mm2APK-PA16A07-002-C 121668-0254
0,75 - 1,50 mm2APK-PA16A15-002-C 121668-0255
0,35 - 0,75 mm2APK-PA16G07-002-C 121668-0265
0,75 - 1,50 mm2APK-PA16G15-002-C 121668-0267
0,30 - 0,60 mm2APK-PA16A06-E 330-8674-020
0,50 - 1,00 mm2APK-PA16G10-E 330-8674-025
tin
gold
(0,8 μm)
tin
gold
(0,8 μm)
tin
gold
(0,8 μm)
Pin Contacts
Pin Contacts
Press-In Contacts (machined)
For APD 37-way
CONTACTS • Low contact resistance (max. 5mΩ) for maximum signal integrity
•Current carrying capacity: 12A max.
• Machined press-in contacts. (other machined contacts available on request)
• Silver plating, please consult factory
1,2 - 1,6 mm Red 121667-0024
1,4 - 2,0 mm Grey 121667-0022
1,9 - 2,1 mm Yellow 121667-0023
White 121667-0025
Individual Wire and Blind Seals
Single Wire Sealing
Blind Seal
Endbell, 37-way
Order No. Designation Color
044-8597-000 Endbell for APD 37-way black (RAL 9005)
version only
33±0.3
ø27±0.3(PG21)
ø46.9±0.3
32.5±0.3
Contacts
(stamped & formed) Plating Crimp Range Reeled 5000 pcs/reel
Designation Part Number
Description Insulation
Diameter Color Part Number
59
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon APD / ISO 15170 Connectors Accessories, 37-way
Flange Gasket
Order Number: 075-8566-004
Dust Cap for Plug
Order Number: 025-8636-037
Order Number: 025-8636-053
Dust Cap for Receptacle
Alignment Disc 37-way
Order Number: 052-8509-004
Alignment disc for 37-way Flange Receptacle
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
60
Cannon APD / ISO 15170 Connectors Tooling, 37-way
Hand Crimp Tool for Stamped and Formed Contacts
Mini Applicator for Stamped and Formed Contacts
Support Tools, 37-way
Designation Order No.
Assembly Adaptor for plug MA-APD-37-R 331-8547-029
Assembly Adaptor for receptacle MA-APD-37-P 248-8653-066
Replacement Nut for MA-APD-37P 217-8516-005
Contact Insertion Tool CIT-APK-16-15-C 121586-5200
Contact Extraction Tool CET-APK-16-C 121586-5195
Hand Tool
Contact Order No. Crimp Die
0,35 - 0,75 mm2121586-5156 Consult Factory
0,75 - 1,5 mm2121586-5156 121586-5197
Contact Order No. Designation
0,35 - 0,75 mm2121586-5131 WWZ-20-100-APK16-07-002
0,75 - 1,5 mm2121586-5132 WWZ-20-100-APK16-15-002
61
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon APD / ISO 15170 Connectors Tooling, 37-way
Hand Crimp Tool for Press-in Contacts
Basic Hand Crimp Tool Order No.
M225201/1-01 995-0001-585
Automatic Crimp Tooling for Press-in Contacts
Designation Order No. Description
WAZ7F-CE 121586-5067 Pneumatic Tool
M22501/1-05 995-0001-507 Locator
BM-2 121586-5068 Bench Mount
WA-10 121586-5069 Food Pedal
Assembly Tooling for Press-in Contacts
Locator Order No.
M225201/1-05 995-0001-507
Designation Order No. Description
CHPZ-240 121586-0081 Hand Lever Press
CIT-APD16-TIP 317-8648-008 Mounting Tip