HS053 Series Assemblies * 82.5 amp AC output @ 40C * Single Channel or 3 Phase output * 3 to 32 VDC input control voltage * Panel mounted * uL, CSA, VDE, CE approved SSRs PRODUCT SELECTION Description 3-32 VDC Control 82.5 A 82.5 A 82.5 A HS053-D24125 HS053-HD60125 HS053-D53TP50D HS053-D24125 HS053-HD60125 HS053-D53TP50D 24-280 600 10 500 82.5 0.04 1200 1.6 6000 0.5 48-660 1200 10 500 82.5 0.04 1200 1.7 6000 0.5 48-530 1200 10 500 82.5 0.05 250 1.6 260 0.5 HS053-D24125 HS053-HD60125 HS053-D53TP50D 3-32 VDC 3.0 VDC 1.0 VDC 32 VDC 3.4 mA @ 5 VDC 1500 Ohms 1/2 Cycle 1/2 Cycle 3-32 VDC 3.0 VDC 1.0 VDC 32 VDC 2.0 mA (3) See Note 3 1/2 Cycle 1/2 Cycle 3-32 VDC 3.0 VDC 1.0 VDC 32 VDC 10 mA @ 5 VDC 450 Ohms 1/2 Cycle 1/2 Cycle OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] (2) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum It for Fusing (8.3 msec) [A sec] Minimum Power Factor (with Maximum Load) INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Reverse Voltage Typical Input Current Nominal Input Impeadance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Status Indicator Display Weight (typical) Encapsulation Recommended Terminal Screw Torque Range: Thermal pad installed GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter (HD model only) HS053-Dxx125 HS053-D53TP50D 4000 Vrms 109 Ohm 8 pF -40 to 80C -40 to 125C None 3.33 lb. (1510g) Themally Conductive Epoxy 6-32 Screws - 10 in/lbs. 8-32 Screws 20 in/lbs. (Screws dry without grease) Yes 4000 Vrms 109 Ohm 10 pF -40 to 80C -40 to 125C None 3.78 lb. (1739g) Themally Conductive Epoxy 6-32 Screws - 10 in/lbs. 8-32 Screws 20 in/lbs. (Screws dry without grease) Yes MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. E116949 (D24125) E116950 (HD60125, D53TP50D) LR81689 (all) 10143 UG (D24125, HD60125) 5941 UG (D53TP50D) Rev. 120111 ANNEX - ENVIROMENTAL INFORMATION