TC4066BP/BF/BFT
2012-02-29
1
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC4066BP,TC4066BF ,TC4066BFT
TC4066B Quad Bilateral Switch
TC4066B contains four independent circuits of bidirectional
switches. When control input CONT is set to “H” level, the
impedance between input and output of the switch becomes low
and when it is set to “L” level, the impedance becomes high. This
can be applied for switching of analog signals and digital signals.
• ON-resistance, Ron
250 Ω (typ.): VDD − VSS = 5 V
110 Ω (typ.): VDD − VSS = 10 V
70 Ω (typ.): VDD − VSS = 15 V
• OFF-resistance, Roff
Roff (typ.) > 109 Ω
Pin Assignment
Truth Table
Control Impedance between
IN/OUT-OUT/IN (Note)
H 0.5 to 5 × 102 Ω
L >109 Ω
Note: See static electrical characteristics
TC4066BP
TC4066BF
TC4066BFT
Weight
DIP14-P-300-2.54 : 0.96 g (typ.)
SOP14-P-300-1.27A : 0.18 g (typ.)
TSSOP14-P-0044-0.65A : 0.06 g (typ.)
VDD
9
CONT 4
IN/OUT 4
8
14
13
12
11
10
1
2
3
4
5
6
7
CONT 2
CONT 3
VSS
OUT/IN 3
IN/OUT 3
(top view)
OUT/IN 1
OUT/IN 2
IN/OUT 1
IN/OUT 2
CONT 1
OUT/IN 4
TC4066BP/BF/BFT
2012-02-29
2
Logic Diagram
Absolute Maximum Ratings (Note)
Characteristics Symbol Rating Unit
DC supply voltage VDD V
SS − 0.5 to VSS + 20 V
Control input voltage VCIN V
SS − 0.5 to VDD + 0.5 V
Switch I/O voltage VI/O V
SS − 0.5 to VDD + 0.5 V
Potential difference across I/O during
ON II/O ±0.5 V
Control input current ICIN ±10 mA
Power dissipation PD 300 (DIP)/180 (SOIC) mW
Operating temperature range Topr −40 to 85 °C
Storage temperature range Tstg −65 to 150 °C
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operating Ranges (VSS = 0 V) (Note)
Characteristics Symbol Test Condition Min Typ. Max Unit
DC supply voltage VDD ⎯ 3 ⎯ 18 V
Input voltage VDD/VOUT ⎯ 0 ⎯ V
DD V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused control inputs must be tied to either VDD or VSS.
1/4 TC4066B
I/O
CONT
O/I
TC4066BP/BF/BFT
2012-02-29
3
Static Electrical Characteristics (in case not specifically appointed, VSS = 0 V)
Test Condition −40°C 25°C 85°C
Characteristics Symbol
VDD
(V) Min Max Min Typ. Max Min Max
Unit
Control input
high voltage VIH |IIS| < 10 μA
5
10
15
3.5
7.0
11.0
⎯
⎯
⎯
3.5
7.0
11.0
2.75
5.50
8.25
⎯
⎯
⎯
3.5
7.0
11.0
⎯
⎯
⎯
V
Control input
low voltage VIL |IIS| < 10 μA
5
10
15
⎯
⎯
⎯
1.5
3.0
4.0
⎯
⎯
⎯
2.25
4.50
6.75
1.5
3.0
4.0
⎯
⎯
⎯
1.5
3.0
4.0
V
On-state
resistance RON
0 ≤ VIS ≤ VDD
RL = 10 kΩ
5
10
15
⎯
⎯
⎯
800
210
140
⎯
⎯
⎯
290
120
85
950
250
160
⎯
⎯
⎯
1200
300
200
Ω
ΔOn-state
resistance
(between any
2 switches)
RONΔ ⎯
5
10
15
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
10
6
4
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Ω
Input/output
leakage
current
IOFF
VIN = 18 V,
VOUT = 0 V
VIN = 0 V,
VOUT = 18 V
18
18
⎯
⎯
±100
±100
⎯
⎯
±0.1
±0.1
±100
±100
⎯
⎯
±1000
±1000
nA
Quiescent
supply current IDD
VIN = VSS, VDD
(Note)
5
10
15
⎯
⎯
⎯
0.25
0.50
1.00
⎯
⎯
⎯
0.001
0.001
0.002
0.25
0.50
1.00
⎯
⎯
⎯
7.5
15.0
30.0
μA
“H”
level IIH VIH = 18 V 18 ⎯ 0.1 ⎯ 10−50.1 ⎯ 1.0
Input
current “L”
level IIL V
IL = 0 V 18 ⎯ −0.1 ⎯ −10−5−0.1 ⎯ −1.0
μA
Note: All valid input combinations.
TC4066BP/BF/BFT
2012-02-29
4
Dynamic Electrical Characteristics (Ta = 25°C, VSS = 0 V, CL = 50 pF)
Test Condition
Characteristics Symbol
VSS
(V)
VDD
(V)
Min Typ. Max Unit
Phase difference between
input to output φI-O C
L = 50 pF
0
0
0
5
10
15
⎯
⎯
⎯
15
8
5
40
20
15
ns
Propagation delay time
(control-OUT)
tpZL
tpZH
RL = 1 kΩ
CL = 50 pF
0
0
0
5
10
15
⎯
⎯
⎯
55
25
20
120
40
30
ns
Propagation delay time
(control -OUT)
tpLZ
tpHZ
RL = 1 kΩ
CL = 50 pF
0
0
0
5
10
15
⎯
⎯
⎯
45
30
25
80
70
60
ns
Max control input repetition
rate fmax (C)
RL = 1 kΩ
CL = 50 pF
0
0
0
5
10
15
⎯
⎯
⎯
10
12
12
⎯
⎯
⎯
MHz
−3dB cutoff frequency fmax (I-O)
RL = 1 kΩ
CL = 15 pF (Note 1) −55 ⎯ 30 ⎯ MHz
Total harmonic distortion ⎯
RL = 10 kΩ
f = 1 kHz (Note 2) −55 ⎯ 0.03 ⎯ %
−50dB feed through
frequency ⎯ R
L = 1 kΩ (Note 3) −55 ⎯ 600 ⎯ kHz
−50dB crosstalk frequency ⎯ R
L = 1 kΩ (Note 4) −55 ⎯ 1 ⎯ MHz
Crosstalk
(control-OUT) ⎯
RIN = 1 kΩ
ROUT = 10 kΩ
CL = 15 pF
0
0
0
5
10
15
⎯
⎯
⎯
200
400
600
⎯
⎯
⎯
mV
Control input ⎯ 5 7.5
Input capacitance CIN
Switch I/O ⎯ 10 ⎯
pF
Feed through capacitance CIN-OUT ⎯ ⎯ 0.5 ⎯ pF
Note 1: Sine wave of ±2.5 p-p shall be used for Vis and the frequency of 20 log 10
is
OS
V
V = −3dB shall be fmax.
Note 2: Vis shall be sine wave of ±2.5 Vp-p
Note 3: Sine wave of ±2.5 Vp-p shall be used for Vis and the frequency of 20 log 10
is
OUT
V
V = −50dB shall be
feed-through.
Note 4: Sine wave of ±2.5 Vp-p shall be used for Vis and the frequency of 20 log 10
is
OUT
V
V = −50dB shall be
crosstalk.
TC4066BP/BF/BFT
2012-02-29
5
Circuit for Measurement of Electrical Characteristics
1. φI-O
2. tpZH, tpHL, tpLZ, tpHZ
3. RON
4. fmax (C)
[]
Ω
−
×= k
V
)V(V
10R
OUT
OUTIN
ON
O/I
I/O
tr
=
20 ns tf = 20 ns
50%
10%
90% 50%
10%
90%
50% 50%
φI-O
φ
I-O
VDD
VSS
VOH
VOL
WAVEFORM
VDD
P.G.
C
O/I
I/O
CL = 50 pF
I/O-O/I
VDD
C
O/I
RL = 10 kΩ
VOUT
VIN
I/O
VSS
tr
=
20 ns
f
1
50%
10%
90%
10%
90% VDD
O/I
50%
tf
=
20 ns
Control
VSS
2
VDD
VDD
P.G.
C
O/I
I/O
RL = 1 kΩ
CL = 50 pF
VDD
VSS
VOH
VOL
VOH
VOL
90%
tpHZ
tpLZ
10%
tpZL
tpZH
50%
50%
50%
90%
10%
Control
SW1 = VDD
SW2 = VSS
SW1 = VSS
SW2 = VDD
tf = 20 ns tr = 20 ns
O/I
O/I
50%
90%
10%
WAVEFORM
RL = 1 kΩ
CL = 50 pF
SW2
VDD
C
P.G.
O/I I/O
SW1
(CONTROL-OUT)
TC4066BP/BF/BFT
2012-02-29
6
5. Crosstalk between Any Two Switches
6. Crosstalk, Control to Input
7. Total Harmonic Distortion, fmax (I-O), Feedthrough
2.5 V
0 V
−2.5 V
I/O
SWITCH ON
P.G.
VDD
C
O/I
RL = 1 kΩ
I/O
VSS
VOUT
VDD
C
O/I
RL = 1 kΩ
I/O
VSS
RL = 1 kΩ
SWITCH OFF
tr
=
20 ns
10%
90%
10%
90% VDD
tf = 20 ns
Control IN
VSS
VOUT
RL = 10 kΩ
CL = 15 pF
P.G.
VDD
C
O/I
I/O
VOUT
RL = 1 kΩ
f
1
2.5 V
0 V
−2.5 V
I/O IN
P.G.
VDD
C
O/I
RL
I/O
VSS
CL
VOUT
TC4066BP/BF/BFT
2012-02-29
7
Package Dimensions
Weight: 0.96 g (typ.)
TC4066BP/BF/BFT
2012-02-29
8
Package Dimensions
Weight: 0.18 g (typ.)
TC4066BP/BF/BFT
2012-02-29
9
Package Dimensions
Weight: 0.06 g (typ.)
TC4066BP/BF/BFT
2012-02-29
10
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
