EAO – Your Expert Partner for
Human Machine Interfaces
EAO Product Information
Series 02
02
Switches and Indicators
02
Contents
2
03.2009
Description......................................................................................................3
Product Assembly ..........................................................................................4
Devices raised mounting ...............................................................................5
Accessories...................................................................................................12
Technical Data...............................................................................................17
Typical Applications.....................................................................................19
Application guidelines..................................................................................20
Marking..........................................................................................................21
Drawings........................................................................................................22
Index...............................................................................................................27
3
03.2009
02
Description
General notes
The pushbuttons of series 02 are noteworthy for the robust design of
their case, their operational reliability and the large marking and
illuminated area. The pushbuttons contain one or two separately
operating snap-action switching elements.
Switches with free choice of bezel
The free choice of bezel enables users to match switches to suit
different purposes. These bezels protect against unintentional
switching. Standard bezels can be optained in black.
Mounting
The switches, which are pushed into the opening in the panel from the
front, are fixed with a plastic sleeve with a maximum effort of 20 Ncm.
Lenses
The flat lenses, made of polymethyl methacrylate, are obtainable in
various colours, as well as transparent and translucent. All lenses can
be exchanged without affeccting the switch position.
Marking
For further information about engraving, hot stamping and film inserts
see part Marking.
Illumination
The T6.8 incandescent (filament) lamp (6...48 V, 1.2 W) ensures perfect
illumination of the lenses, which are supplied in various colours.
T6.8 Single-LED (6, 12, 24, 28, 48 V) are also available in blue, green,
red, white or yellow.
Luminosity and wave length scattering caused by the technology used
in the LED manufacturing processes may lead to visual differences in
our products.
For supply voltages above 48 V, it is necessary to use a voltage
reduction element (external series resistor or transformer).
Keylock switch
Standard lock number is YB1. If the lock number is not specified, we will
supply standard number YB1.
Additional 9 lock numbers are available on request.
Two keys are supplied with each keylock switch.
Spare keys for standard locks may be ordered by quoting Typ-Nr.
02-989.
Number structure
Nomenclature in accordance with ' IEC 61058 TEST REPOR T '. The
certification document we dispatch to them on demands.
Specimen order
0
We reserve the right to modify technical data
All dimensions in mm
Product Information Illuminated pushbutton :
- Illuminiated pushbutton actuator, 24 x 36 mm,
2 change over contacts, momentary action,
screw terminal
02-617.011
Essential accessories :
- Lens plastic colourless, transparent 02-902.5
- Holder farblos, transparent 02-908.5
- Diffusor plate 02-909
- Front bezel flush, black 02-967.0
- Single-LED, T6.8, 24 VDC, white diffuse 10-2K12.1079
02
Product Assembly
4
03.2009
Illuminated pushbutton
01 Lens
2 Front bezel
3 Switch housing
4 Fixing bezel
02
Devices raised mounting
5
03.2009
Essential Accessories:
d Diffusor plate page 13
d Front bezel flush page 13
d Holder page 12
d Lens page 12
d Single-LED page 15
Continuation see next page
Please take note of heat generating !
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Indicator actuator
Front protection
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Indicator actuator
reduced length, without built-in series resistor, for filament lamp or LED IP 40 PT 2.8 02-021.002 1120.030
PT 4.8 02-021.003 1120.030
ST 02-021.001 1120.030
with built-in lamp series resistor and diode, 230 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 PT 2.8 02-073.002 1220.045
PT 4.8 02-073.003 1220.045
ST 02-073.001 1220.045
with built-in lamp series resistor, 110 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 PT 2.8 02-071.002 1220.045
PT 4.8 02-071.003 1220.045
ST 02-071.001 1220.045
with built-in lamp series resistor, 125 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 PT 2.8 02-072.002 1220.045
PT 4.8 02-072.003 1220.045
ST 02-072.001 1220.045
with built-in lamp series resistor, 230 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 PT 2.8 02-070.002 1220.045
PT 4.8 02-070.003 1220.045
ST 02-070.001 1220.045
02
Devices raised mounting
6
03.2009
Essential Accessories:
d Front bezel raised page 13
Continuation see next page
Further information in the Technical Data and Typical Applications
Terminals: ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Buzzer
Front protection
Front cap
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Buzzer
Operating voltage 10 ... 55 VAC / 10 ... 75 VDC IP 40 Pastic black ST 02-810.001 1 3 1 0.060
02
Devices raised mounting
7
03.2009
Essential Accessories:
d Front bezel flush page 13
d Lens page 12
Continuation see next page
Contacts: C = Changeover
Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action- Maintained action
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Pushbutton actuator
Front protection
Contacts
Switching action
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Pushbutton actuator IP 40 1 C MA PT 2.8 02-613.012 1670.045
PT 4.8 02-613.013 1670.045
ST 02-613.011 1670.045
MPT 2.802-611.012 1680.045
PT 4.8 02-611.013 1680.045
ST 02-611.011 1680.045
2 C MA PT 2.8 02-614.012 1640.050
PT 4.8 02-614.013 1640.050
ST 02-614.011 1640.050
MPT 4.802-612.013 1690.050
ST 02-612.011 1690.050
M-MA PT 2.8 02-615.012 1660.050
PT 4.8 02-615.013 1660.050
ST 02-615.011 1660.050
02
Devices raised mounting
8
03.2009
Essential Accessories:
d Diffusor plate page 13
d Front bezel flush page 13
d Holder page 12
d Lens page 12
d Single-LED page 15
Continuation see next page
Contacts: C = Changeover
Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Illuminated pushbutton actuator
Front protection
Contacts
Switching action
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Illuminated pushbutton actuator IP 40 1 C MA PT 2.8 02-618.012 1 6 3 0.050
PT 4.8 02-618.013 1 6 3 0.050
ST 02-618.011 1 6 3 0.050
MPT 2.802-616.012 1 6 10 0.050
PT 4.8 02-616.013 1 6 10 0.050
ST 02-616.011 1 6 10 0.050
2 C MA PT 2.8 02-619.012 1 6 5 0.055
PT 4.8 02-619.013 1 6 5 0.055
ST 02-619.011 1 6 5 0.055
MPT 2.802-617.012 1 6 12 0.055
PT 4.8 02-617.013 1 6 12 0.055
ST 02-617.011 1 6 12 0.055
M-MA PT 2.8 02-620.012 1 6 11 0.055
PT 4.8 02-620.013 1 6 11 0.055
ST 02-620.011 1 6 11 0.055
02
Devices raised mounting
9
03.2009
Essential Accessories:
d Front bezel flush page 13
d Mushroom-head cap page 12
Continuation see next page
Contacts: C = Changeover
Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action- Maintained action
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Mushroom-head pushbutton actuator
Front protection
Contacts
Switching action
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Mushroom-head pushbutton actuator IP 40 1 C MA PT 2.8 02-613.012 1970.045
PT 4.8 02-613.013 1970.045
ST 02-613.011 1970.045
MPT 2.802-611.012 1980.045
PT 4.8 02-611.013 1980.045
ST 02-611.011 1980.045
2 C MA PT 2.8 02-614.012 1940.050
PT 4.8 02-614.013 1940.050
ST 02-614.011 1940.050
MPT 4.802-612.013 1990.050
ST 02-612.011 1990.050
M-MA PT 2.8 02-615.012 1960.050
PT 4.8 02-615.013 1960.050
ST 02-615.011 1960.050
02
Devices raised mounting
10
03.2009
Note:
The keylock front bezel of the switch types 02-198.01x and 02-695.01x are factory-assembled and do not have to be ordered separately.
Essential Accessories:
d Front bezel flush page 13
d Keylock front bezel page 12
Continuation see next page
After turning the key 90° clockwise, the switch can be operated.
In the unlocked positions the switch always performs a momentary action.
Contacts: C = Changeover
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Keylock switch actuator 2 positions
0
Front protection
Contacts
Key remove
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Keylock switch actuator 2 positions
Position A : lockable, actuated
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-690.012 1 7 13 0.055
PT 4.8 02-690.013 1 7 13 0.055
ST 02-690.011 1 7 13 0.055
Position A : lockable, non-actuated or actuated
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-692.012 1 7 13 0.055
PT 4.8 02-692.013 1 7 13 0.055
ST 02-692.011 1 7 13 0.055
Position A : lockable, non-actuated
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-691.012 1 7 13 0.055
PT 4.8 02-691.013 1 7 13 0.055
ST 02-691.011 1 7 13 0.055
Position A : lockable, non-actuated or actuated
Standard lock YB1
Front plastic grey
(can be used with protective cover 22-925)
IP 40 2 C A PT 2.8 02-198.012 1 7 13 0.055
PT 4.8 02-198.013 1 7 13 0.055
ST 02-198.011 1 7 13 0.055
Position A : lockable, non-actuated
Position C : locked, key not removeable
Standard lock YB1
Front plastic grey
IP 40 2 C A PT 2.8 02-695.012 1 7 13 0.055
PT 4.8 02-695.013 1 7 13 0.055
ST 02-695.011 1 7 13 0.055
02
Devices raised mounting
11
03.2009
Continuation see next page
Lens can be operated without key, twist to key release.
Note: Switch gear is not usable for emergency-stop switch application!
Contacts: C = Changeover
Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal
Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25
Mushroom-head keylock switch 2 positions
0
Front protection
Contacts
Key remove
Terminals
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Mushroom-head keylock switch 2 positions
Position A : lockable, actuated
Standard lock YB1
Mushroom-head cap plastic grey
IP 40 2 C A PT 2.8 02-199.012 1 8 14 0.055
PT 4.8 02-199.013 1 8 14 0.055
ST 02-199.011 1 8 14 0.055
12
03.2009
02
Accessories
Continuation see next page
use Front bezel flush
Continuation see next page
Continuation see next page
Standard lock YB1, other lock numbers on request
Continuation see next page
Front
Lens
Lens
a 24 x 36 mm
Typ-Nr. e
Lens
17.5 x 25.4 mm, illuminative
(not recommended for film insert), ripped
Plastic blue translucent flush 02-901.6 0.004
Plastic colourless transparent flush 02-901.7 0.004
Plastic green translucent flush 02-901.5 0.004
Plastic orange translucent flush 02-901.3 0.004
Plastic red translucent flush 02-901.2 0.004
Plastic smoked translucent flush 02-901.1 0.004
Plastic white translucent flush 02-901.9 0.004
Plastic yellow translucent flush 02-901.4 0.004
17.5 x 25.4 mm, illuminative
(use Holder for film insert) Plastic colourless transparent flush 02-902.7 0.004
Plastic green translucent flush 02-902.5 0.004
Plastic red translucent flush 02-902.2 0.004
17.5 x 25.4 mm, non-illuminative Plastic black opaque flush 02-901.0 0.004
Plastic grey opaque flush 02-901.8 0.004
Mushroom-head cap
Lens Typ-Nr. e
Mushroom-head cap
23 x 35 mm Plastic black opaque 02-930.0 0.016
Plastic green opaque 02-930.5 0.016
Plastic red opaque 02-930.2 0.016
Plastic yellow opaque 02-930.4 0.016
Keylock front bezel
Typ-Nr. e
Keylock front bezel
grey 02-980.1 0.020
grey, for keylock switch 02-695 02-982.1 0.020
Holder
Holder Typ-Nr. e
Holder
for Lens with film insert Plastic blue 02-908.6 0.001
Plastic colourless 02-908.7 0.001
Plastic green 02-908.5 0.001
Plastic orange 02-908.3 0.001
Plastic red 02-908.2 0.001
Plastic white 02-908.9 0.001
Plastic yellow 02-908.4 0.001
13
03.2009
02
Accessories
Continuation see next page
Continuation see next page
Lens only removable with lens remover 98-969
Continuation see next page
use Front bezel flush
Continuation see next page
Technical drawing from page 22
use Front bezel flush
Continuation see next page
Mounting dimensions from page 22, Technical drawing from page 22
Diffusor plate
Typ-Nr. e
Diffusor plate
for Lens with film insert 02-909 0.001
Front bezel flush
Front bezel
a 24 x 36 mm
Typ-Nr. e
Front bezel flush Plastic black 02-965.0 0.001
Front bezel raised
Front bezel
a 24 x 36 mm
Typ-Nr. e
Front bezel raised Plastic black 02-967.0 0.001
Protective cover
a 24 x 36 mm
Typ-Nr.
Technical drawing
e
Protective cover
hinged, transparent, with means for sealing 22-925 5 0.004
Sprayproof cover
Front protection
Typ-Nr.
Mounting dimensions
Technical drawing
e
Sprayproof cover
three-part, PVC (-20 °C ... +60 °C) IP 65 02-924 2 4 0.005
three-part, Silicone (-25 °C ... +85 °C) IP 65 02-935 2 4 0.005
14
03.2009
02
Accessories
Continuation see next page
Mounting dimensions from page 22
Continuation see next page
Other lock numbers on request
>
all connection methods
Continuation see next page
>
Continuation see next page
Blind plug
Blind plug
a 24 x 36 mm
Typ-Nr.
Mounting dimensions
e
Blind plug Plastic black 02-949.0 1 0.004
Plastic grey 02-949.8 1 0.004
Spare key
Typ-Nr. e
Spare key
Standard lock YB1 02-989.001 0.001
Backside
Terminal cover
Typ-Nr. e
Terminal cover
unsuitable for indicators with built-in series resistor with lamp 02-929 0.005
Illumination
Filament lamp
Socket Operating voltage/-current Typ-Nr. e
Filament lamp T6.8 12 VAC/DC, 100 mA 10-1209.1329 0.001
12 VAC/DC, 50 mA 10-1209.1279 0.001
24 VAC/DC, 25 mA 10-1212.1199 0.001
24 VAC/DC, 50 mA 10-1212.1279 0.001
28 VAC/DC, 40 mA 10-1213.1249 0.001
30 VAC/DC, 40 mA 10-1214.1249 0.001
36 VAC/DC, 35 mA 10-1216.1229 0.001
48 VAC/DC, 25 mA 10-1219.1199 0.001
6 VAC/DC, 200 mA 10-1206.1369 0.001
15
03.2009
02
Accessories
Continuation see next page
Note:
AC operation through halve-wave rectifier possible, slight flickering can occure.
for lamp voltage reduction
Continuation see next page
Please keep to the country specific security rules.
for fitting with series resistors
Continuation see next page
Single-LED
Socket Light colour Operating voltage/-current Typ-Nr. e
Single-LED T6.8 blue 12 VAC/DC, 9/17 mA 10-2K09.1076 0.002
24 VAC/DC, 9/17 mA 10-2K12.1076 0.002
28 VAC/DC, 9/17 mA 10-2K13.1076 0.002
48 VAC/DC, 4/8 mA 10-2K19.1056 0.002
6 VDC, 17 mA 10-2K06.3156 0.002
green 12 VAC/DC, 9/17 mA 10-2K09.1075 0.002
24 VAC/DC, 9/17 mA 10-2K12.1075 0.002
28 VAC/DC, 9/17 mA 10-2K13.1075 0.002
48 VAC/DC, 4/8 mA 10-2K19.1055 0.002
6 VDC, 17 mA 10-2K06.3155 0.002
red 12 VAC/DC, 9/17 mA 10-2K09.1072 0.002
24 VAC/DC, 9/17 mA 10-2K12.1072 0.002
28 VAC/DC, 9/17 mA 10-2K13.1072 0.002
48 VAC/DC, 4/8 mA 10-2K19.1052 0.002
6 VDC, 17 mA 10-2K06.3152 0.002
white diffuse 12 VAC/DC, 9/17 mA 10-2K09.1079 0.002
24 VAC/DC, 9/17 mA 10-2K12.1079 0.002
28 VAC/DC, 9/17 mA 10-2K13.1079 0.002
48 VAC/DC, 4/8 mA 10-2K19.1059 0.002
6 VDC, 17 mA 10-2K06.3159 0.002
yellow 12 VAC/DC, 9/17 mA 10-2K09.1074 0.002
24 VAC/DC, 9/17 mA 10-2K12.1074 0.002
28 VAC/DC, 9/17 mA 10-2K13.1074 0.002
48 VAC/DC, 4/8 mA 10-2K19.1054 0.002
6 VDC, 17 mA 10-2K06.3154 0.002
Series resistor
Operating voltage Typ-Nr. e
Series resistor
10 kΩ, for filament lamp 48 VAC, 25 mA 230/240 V 02-904.7 0.003
2.7 kΩ, for filament lamp 48 VAC, 25 mA 110 V 02-904.0 0.003
3.3 kΩ, for filament lamp 48 VAC, 25 mA 125 V 02-904.1 0.003
4.7 kΩ, for filament lamp 48 VAC, 25 mA 145 V 02-904.3 0.003
Terminal plate empty
Typ-Nr. e
Terminal plate empty
10 spaces 125 x 60 x 15 mm 02-912.2 0.045
15 spaces 187.5 x 60 x 15 mm 02-912.3 0.090
20 spaces 250 x 60 x 15 mm 02-912.4 0.095
5 spaces 62.5 x 60 x 15 mm 02-912.1 0.025
16
03.2009
02
Accessories
>
Continuation see next page
Continuation see next page
CAUTION
A switching process might be released when replacing the Lamp/LED !
Assembling
Lens remover
Typ-Nr. e
Lens remover
for flush front bezel 02-905 0.011
for raised front bezel 98-968 0.004
Lamp remover
Typ-Nr. 0.011
Lamp remover
Filament lam p 61-9740.0 0.004
LED 03-996
17
03.2009
02
Technical Data
Switching system
1 or 2 self-cleaning, snap-action switching elements.
1 or 2 double-throw contacts.
Material
Material of contact
Standard version:
Silver (U >20 V)
Special versions: (on request)
Gold/Silver 700 Au/300 Ag (U <50 V)
Silver/Palladium 700 Ag/300 Pd (U >20 V) for atmospheres
containing sulphur
Switch housing
Thermosetting material, heat-resistant
Indicator housing with reduced length
Polyamide
Mechanical characteristics
Terminals
Screw terminal (with self-lifting clip):
max. wire cross-section, 2 x 2.5 mm²
max. wire cross-section of stranded cable, 2 x 1.5 mm²
Plug-in terminal 2.8 x 0.8 mm:
max. wire cross-section of stranded cable, 1 mm² can also be used
as soldering terminal
max. wire cross-section, 2 x 1 mm²
max. wire cross-section of stranded cable: 2 x 0.75 mm²
Plug-in terminal 4.8 x 0.8 mm:
max. wire cross-section of stranded cable, 2.5 mm² can also be
used as soldering terminal
max. wire cross-section: 2 x 1mm²
max. wire cross-section of stranded cable, 2 x 0.75 mm²
Actuating force
6 N ... 12 N
Actuating travel
5 mm
Mechanical lifetime
Momentary action 2 million operations
Maintained action 1 million operations
Electrical cha rac te ris tic s
Standards
The switches comply with the "Standards for low-voltage switching
devices" EN IEC 61058-1
Rated insulation voltage
400 VAC/440 VDC, as per IEC 61058-1
Conventional free air thermal current
10 A
The maximum current in continuous operation and at ambient tem-
perature not exceeding the quoted maximum values.
Switch rating
400 VAC, 10 A, cosφ 0.95, as per IEC 61058-1
250 VAC, 10 A, as per UL
Electric strength
2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per
IEC 61058-1
Environmental conditions
Storage temperature
-30 °C ... +85 °C
Service temperature
-25 °C ... +55 °C
For indicators and illuminated pushbuttons mounted as a block,
make sure the heat can escape freely.
Protection degree
Front side IP 40, IP 65 with spray cover, as per IEC 60529
Shock resistance
15 g for 11 ms, as per IEC 60068-2-27
Vibration resistance
10 g at 10-2000 Hz, amplitude 1.0 mm, as per IEC 60068-2-6
Approvals
Approbations
CB (IEC 61058-1/92)
CSA
ENEC (EN 61058-1/92)
Germanischer Lloyd
UL
VDE
Declaration of conformity
CE
>
Buzzer system
System
Electronic non-contacting buzzer
with IC oscillator
Material
Alarm buzzer case
Thermosetting material
Front cap
Polycarbonate (PC)
Front bezel
Polymethylacrylate
Mechanical characteristics
Terminals
Screw terminal
Electrical characteristics
Frequency (tone)
Approx. 2.8 kHz
Sound pressure
85 dB (A) ±8 dB at a distance of 0.1 m
Volume variable with a 1 MΩ potentiometer or corresponding fixed
resistor
Actuator with snap-action switching element
Buzzer
18
03.2009
02
Technical Data
Operation Voltage/Current
typical
0
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Operating temperature
-25 °C ... +55 °C
Protection degree
Front side IP 40, as per IEC 60529
Approvals
Approbations
CB (IEC 61058-1/92)
ENEC (EN 61058-1/92)
Declaration of conformity
CE
10 ... 55 VAC 10 ... 75 VDC
25 mA 15 mA
02
Typical Applications
19
03.2009
0
Buzzer
U
U
1. Supply voltage I
Continous tone
U = 10 - 35 VAC
U = 10 - 50 VDC
3. Intermittent tone
Interval approx. 3 Hz
2. Supply voltage II
Continous tone
U = 35 - 55 VAC
U = 35 - 75 VDC
4. Volume control
c
d
e
c
d
e
f
g
h
f
g
h
f
g
h
f
g
h
c
d
e
c
d
e
02
Application guidelines
20
03.2009
When switching inductive loads such as r elays, DC motors, and DC solenoids, it is always important
to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched
off, a counter emf can severely damage switch contacts and greatly shorten lifetime.
Fig. 1 shows an induct ive load with a free-wheeling diode connected in parallel. This free-wheeling
diode provides a path for the inductor current to flow when the current is interrupted by the switch.
Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric break-
down voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude
even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2.
The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the
voltage driving the inductive load. The DC blocking voltage (VR) of t he free-wheeling diode can be
found in the datasheet of a diode. The forward current should be equal or greater than the maximum
current flowing through the load.
To get an efficient protection, the free-wheeling diode must be connected as close as possible
to the inductive load!
0
Suppressor circuits
Sveral hundred
to several
thousend volts
ON OFF
0
e = L di
dt
__
VDC
Switch
Free-wheeling
diode
Inductive
load
Counter emf
over load without free-wheeling diode
Fig. 2
Switching with inductive load
Fig. 1
+
_
02
Marking
21
03.2009
0
All dimensions in mm
0
0
General notes
1. Engraving
In addition to the most commonly used world
languages, in DIN 1451-3 close spacing, other
typefaces are available as Scandinavian,
Slavic, Greek, Russian and Polish.
Red, blue and black lenses are filled with white
colour. Other colour lenses are filled in black.
Standard height of letters is 3 mm. If the height
is not specified, we will supply 3 mm engraved
letters.
2. Hot stamping
For larger series it is worth considerin g
markings by means of hot stamping We will
pleased to advise you.
For letters and figures, typefaces with 2.5 mm,
3 mm and 4 mm are available.
3. Film inserts
Instead of using engraving the lenses can be
fitted with transparent film inserts, as an
alternative. For this purpose, though, it is
advisible to use lenses without ripped pattern.
In the case of use of a smoke-black lens the
fitted film becomes readable only if the lamp is
on.
The film (F) is inserted in the cap. To ensure
even illumination a diffusor (D) is
recommended, which is inserted beneath the
film. If, on the other hand, the diffusor is
inserted above the film, the lettering only
becomes legible when the lamp is alight. To
hold the film and diffusor in position, the use of
a holder (N) is advised.
The film thickness is 0.2 mm.
Film insert
max. size Height of letters
hNumber of lines Number of (target value)
capital letters per line Number of (target value)
small letters per line Image
14.3 x 22.4 3 4 11 13 B1
7 - 8 8 - 9 B2
427 9 B1
45 5 - 6 B2
5 2 5 - 6 6 - 7 B1
33 - 4 4 B2
615 6 B1
23 4 B2
813 4 B1
22B2
h
F
D
N
ABC
abc
ABC
abc
B1 B2
02
Drawings
22
03.2009
1 Indicator actuator page 5 | Buzzer page 6 | Pushbutton actuator page 7 | Illuminated pushbutton actuator page 8 | Mushroom-head
pushbutton actuator page 9 | Keylock switch actuator 2 positions page 10 | Mushroom-head keylock switch 2 positions page 11 | Blind
plug page 14
2 Sprayproof cover page 13
1 Indicator actuator page 5
2 Indicator actuator page 5
Mounting dimensions
Technica l dra wi n g
24 min.
21.2 +
0.2
0
29.2 +
0.2
0
36 min.
02
Drawings
23
03.2009
3 Buzzer page 6
4 Sprayproof cover page 13
5 Protective cover page 13
6 Pushbutton actuator page 7 | Illuminated pushbutton actuator page 8
02
Drawings
24
03.2009
7 Keylock switch actuator 2 positions page 10
8 Mushroom-head keylock switch 2 positions page 11
9 Mushroom-head pushbutton actuator page 9
02
Drawings
25
03.2009
1 Buzzer page 6
2 Indicator actuator page 5
3 Illuminated pushbutton actuator page 8
4 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9
5 Illuminated pushbutton actuator page 8
6 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9
7 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9
8 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9
Circuit drawing
02
Drawings
26
03.2009
9 Pushbutton actua tor page 7 | Mushroom-head pushbutton actuator page 9
10 Illuminated pushbutton actuator page 8
11 Illuminated pushbutton actuator page 8
12 Illuminated pushbutton actuator page 8
13 Keylock switch actuator 2 positions page 10
14 Mushroom-head keylock switch 2 positions page 11
Index from Typ-Nr.
27
03.2009
Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page
02-021.001 ...................................5
02-021.002 ...................................5
02-021.003 ...................................5
02-070.001 ...................................5
02-070.002 ...................................5
02-070.003 ...................................5
02-071.001 ...................................5
02-071.002 ...................................5
02-071.003 ...................................5
02-072.001 ...................................5
02-072.002 ...................................5
02-072.003 ...................................5
02-073.001 ...................................5
02-073.002 ...................................5
02-073.003 ...................................5
02-198.011 ................................. 10
02-198.012 ................................. 10
02-198.013 ................................. 10
02-199.011 ................................. 11
02-199.012 ................................. 11
02-199.013 ................................. 11
02-611.011 ...................................7
02-611.011 ...................................9
02-611.012 ...................................7
02-611.012 ...................................9
02-611.013 ...................................7
02-611.013 ...................................9
02-612.011 ...................................7
02-612.011 ...................................9
02-612.013 ...................................7
02-612.013 ...................................9
02-613.011 ...................................7
02-613.011 ...................................9
02-613.012 ...................................7
02-613.012 ...................................9
02-613.013 ...................................7
02-613.013 ...................................9
02-614.011 ...................................7
02-614.011 ...................................9
02-614.012 ...................................7
02-614.012 ...................................9
02-614.013 ...................................7
02-614.013 ...................................9
02-615.011 ...................................7
02-615.011 ...................................9
02-615.012 ...................................7
02-615.012 ...................................9
02-615.013 ...................................7
02-615.013 ...................................9
02-616.011 ...................................8
02-616.012 ...................................8
02-616.013 ...................................8
02-617.011 ...................................8
02-617.012 ...................................8
02-617.013 ...................................8
02-618.011 ...................................8
02-618.012 ...................................8
02-618.013 ...................................8
02-619.011 ...................................8
02-619.012 ...................................8
02-619.013 ...................................8
02-620.011 ...................................8
02-620.012 ...................................8
02-620.013 ................................... 8
02-690.011 ................................. 10
02-690.012 ................................. 10
02-690.013 ................................. 10
02-691.011 ................................. 10
02-691.012 ................................. 10
02-691.013 ................................. 10
02-692.011 ................................. 10
02-692.012 ................................. 10
02-692.013 ................................. 10
02-695.011 ................................. 10
02-695.012 ................................. 10
02-695.013 ................................. 10
02-810.001 ................................... 6
02-901.0 ..................................... 12
02-901.1 ..................................... 12
02-901.2 ..................................... 12
02-901.3 ..................................... 12
02-901.4 ..................................... 12
02-901.5 ..................................... 12
02-901.6 ..................................... 12
02-901.7 ..................................... 12
02-901.8 ..................................... 12
02-901.9 ..................................... 12
02-902.2 ..................................... 12
02-902.5 ..................................... 12
02-902.7 ..................................... 12
02-904.0 ..................................... 15
02-904.1 ..................................... 15
02-904.3 ..................................... 15
02-904.7 ..................................... 15
02-905 ........................................ 16
02-908.2 ..................................... 12
02-908.3 ..................................... 12
02-908.4 ..................................... 12
02-908.5 ..................................... 12
02-908.6 ..................................... 12
02-908.7 ..................................... 12
02-908.9 ..................................... 12
02-909 ........................................ 13
02-912.1 ..................................... 15
02-912.2 ..................................... 15
02-912.3 ..................................... 15
02-912.4 ..................................... 15
02-924 ........................................ 13
02-929 ........................................ 14
02-930.0 ..................................... 12
02-930.2 ..................................... 12
02-930.4 ..................................... 12
02-930.5 ..................................... 12
02-935 ........................................ 13
02-949.0 ..................................... 14
02-949.8 ..................................... 14
02-965.0 ..................................... 13
02-967.0 ..................................... 13
02-980.1 ..................................... 12
02-982.1 ..................................... 12
02-989.001 ................................. 14
03-996 ........................................ 16
10-1206.1369 ............................. 14
10-1209.1279 ............................. 14
10-1209.1329 ............................. 14
10-1212.1199 ............................. 14
10-1212.1279 .............................14
10-1213.1249 .............................14
10-1214.1249 .............................14
10-1216.1229 .............................14
10-1219.1199 .............................14
10-2K06.3152 .............................15
10-2K06.3154 .............................15
10-2K06.3155 .............................15
10-2K06.3156 .............................15
10-2K06.3159 .............................15
10-2K09.1072 .............................15
10-2K09.1074 .............................15
10-2K09.1075 .............................15
10-2K09.1076 .............................15
10-2K09.1079 .............................15
10-2K12.1072 .............................15
10-2K12.1074 .............................15
10-2K12.1075 .............................15
10-2K12.1076 .............................15
10-2K12.1079 .............................15
10-2K13.1072 .............................15
10-2K13.1074 .............................15
10-2K13.1075 .............................15
10-2K13.1076 .............................15
10-2K13.1079 .............................15
10-2K19.1052 .............................15
10-2K19.1054 .............................15
10-2K19.1055 .............................15
10-2K19.1056 .............................15
10-2K19.1059 .............................15
22-925 ........................................13
61-9740.0 ...................................16
98-968 ........................................16
EAO AG
Tannwaldstrasse 88
4601 Olten, Switzerland
E-mail info@eao.com
Website www.eao.com
Austria
Phone +49 201 85 87 0
Fax +49 201 85 87 210
E-mail sales.ede@eao.com
Belgium
Phone +32 3 777 82 36
Fax +32 3 777 84 19
E-mail sales.ebl@eao.com
China
Phone +852 27 86 91 41
Fax +852 27 86 95 61
E-mail sales.ehk@eao.com
France
Phone +33 1 64 43 37 37
Fax +33 1 64 43 37 49
E-mail sales.ese@eao.com
Germany
Phone +49 201 85 87 0
Fax +49 201 85 87 210
E-mail sales.ede@eao.com
Italy
Phone +39 035 481 0189
Fax +39 035 481 3786
E-mail sales.eit@eao.com
Japan
Phone +81 3 5444 5411
Fax +81 3 5444 0345
E-mail sales.esj@eao.com
Netherlands
Phone +31 78 653 17 00
Fax +31 78 653 17 99
E-mail sales.enl@eao.com
Sweden
Phone +46 8 683 86 60
Fax +46 8 724 29 12
E-mail sales.esw@eao.com
Switzerland
Phone +41 62 388 95 00
Fax +41 62 388 95 55
E-mail sales.ech@eao.com
United Kingdom
Phone +44 1444 236 000
Fax +44 1444 236 641
E-mail sales.euk@eao.com
USA
Phone +1 203 877 4577
Fax +1 203 877 3694
E-mail sales.eus@eao.com
Other Countries
Phone +41 62 286 92 10
Fax +41 62 296 21 62
E-mail info@eao.com
EAO reserves the right to alter specifications without further notice