EAO - Your Expert Partner for Human Machine Interfaces EAO Product Information Series 02 Switches and Indicators 02 Contents 02 Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Devices raised mounting ............................................................................... 5 Accessories................................................................................................... 12 Technical Data............................................................................................... 17 Typical Applications ..................................................................................... 19 Application guidelines.................................................................................. 20 Marking .......................................................................................................... 21 Drawings........................................................................................................ 22 Index............................................................................................................... 27 2 03.2009 02 Description Specimen order Product Information General notes The pushbuttons of series 02 are noteworthy for the robust design of their case, their operational reliability and the large marking and illuminated area. The pushbuttons contain one or two separately operating snap-action switching elements. Switches with free choice of bezel The free choice of bezel enables users to match switches to suit different purposes. These bezels protect against unintentional switching. Standard bezels can be optained in black. Mounting The switches, which are pushed into the opening in the panel from the front, are fixed with a plastic sleeve with a maximum effort of 20 Ncm. 0 Illuminated pushbutton : - Illuminiated pushbutton actuator, 24 x 36 mm, 2 change over contacts, momentary action, screw terminal 02-617.011 Essential accessories : - Lens plastic colourless, transparent 02-902.5 - Holder farblos, transparent 02-908.5 - Diffusor plate 02-909 - Front bezel flush, black 02-967.0 - Single-LED, T6.8, 24 VDC, white diffuse 10-2K12.1079 We reserve the right to modify technical data All dimensions in mm Lenses The flat lenses, made of polymethyl methacrylate, are obtainable in various colours, as well as transparent and translucent. All lenses can be exchanged without affeccting the switch position. Marking For further information about engraving, hot stamping and film inserts see part Marking. Illumination The T6.8 incandescent (filament) lamp (6...48 V, 1.2 W) ensures perfect illumination of the lenses, which are supplied in various colours. T6.8 Single-LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. For supply voltages above 48 V, it is necessary to use a voltage reduction element (external series resistor or transformer). Keylock switch Standard lock number is YB1. If the lock number is not specified, we will supply standard number YB1. Additional 9 lock numbers are available on request. Two keys are supplied with each keylock switch. Spare keys for standard locks may be ordered by quoting Typ-Nr. 02-989. Number structure Nomenclature in accordance with ' IEC 61058 TEST REPORT '. The certification document we dispatch to them on demands. 3 03.2009 02 Product Assembly Illuminated pushbutton 1 2 3 4 0 4 03.2009 Lens Front bezel Switch housing Fixing bezel 02 Devices raised mounting Indicator actuator Essential Accessories: d Diffusor plate page 13 d d d d Front bezel flush page 13 Holder page 12 Lens page 12 Single-LED page 15 IP 40 with built-in lamp series resistor, 110 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 with built-in lamp series resistor, 125 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 with built-in lamp series resistor, 230 VAC/DC to 48 V, 25 mA, for filament lamp IP 40 Circuit drawing with built-in lamp series resistor and diode, 230 VAC/DC to 48 V, 25 mA, for filament lamp PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST Technical drawing IP 40 a 24 x 36 mm Typ-Nr. 02-021.002 02-021.003 02-021.001 02-073.002 02-073.003 02-073.001 02-071.002 02-071.003 02-071.001 02-072.002 02-072.003 02-072.001 02-070.002 02-070.003 02-070.001 Mounting dimensions Indicator actuator reduced length, without built-in series resistor, for filament lamp or LED Terminals Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0.030 0.030 0.030 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 Please take note of heat generating ! Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 5 03.2009 02 Devices raised mounting Buzzer Essential Accessories: d Front bezel raised page 13 Further information in the Technical Data and Typical Applications Terminals: ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 6 03.2009 Circuit drawing ST Technical drawing IP 40 a 24 x 36 mm Typ-Nr. 02-810.001 Mounting dimensions Buzzer Operating voltage 10 ... 55 VAC / 10 ... 75 VDC Front cap Pastic black Terminals Front protection Continuation see next page e 1 3 1 0.060 02 Devices raised mounting Pushbutton actuator Essential Accessories: d Front bezel flush page 13 d Lens page 12 2C MA M M-MA Circuit drawing M PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 4.8 ST PT 2.8 PT 4.8 ST Technical drawing MA a 24 x 36 mm Typ-Nr. 02-613.012 02-613.013 02-613.011 02-611.012 02-611.013 02-611.011 02-614.012 02-614.013 02-614.011 02-612.013 02-612.011 02-615.012 02-615.013 02-615.011 Mounting dimensions 1C Terminals IP 40 Switching action Contacts Pushbutton actuator Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 8 8 8 4 4 4 9 9 6 6 6 0.045 0.045 0.045 0.045 0.045 0.045 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 7 03.2009 02 Devices raised mounting Illuminated pushbutton actuator Essential Accessories: d Diffusor plate page 13 d d d d Front bezel flush page 13 Holder page 12 Lens page 12 Single-LED page 15 2C MA M M-MA Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 8 03.2009 Circuit drawing M PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST Technical drawing MA a 24 x 36 mm Typ-Nr. 02-618.012 02-618.013 02-618.011 02-616.012 02-616.013 02-616.011 02-619.012 02-619.013 02-619.011 02-617.012 02-617.013 02-617.011 02-620.012 02-620.013 02-620.011 Mounting dimensions 1C Terminals IP 40 Switching action Contacts Illuminated pushbutton actuator Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 3 3 3 10 10 10 5 5 5 12 12 12 11 11 11 0.050 0.050 0.050 0.050 0.050 0.050 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 02 Devices raised mounting Mushroom-head pushbutton actuator Essential Accessories: d Front bezel flush page 13 d Mushroom-head cap page 12 2C MA M M-MA Circuit drawing M PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 4.8 ST PT 2.8 PT 4.8 ST Technical drawing MA a 24 x 36 mm Typ-Nr. 02-613.012 02-613.013 02-613.011 02-611.012 02-611.013 02-611.011 02-614.012 02-614.013 02-614.011 02-612.013 02-612.011 02-615.012 02-615.013 02-615.011 Mounting dimensions 1C Terminals IP 40 Switching action Contacts Mushroom-head pushbutton actuator Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9 9 9 9 9 9 9 9 9 9 9 9 9 9 7 7 7 8 8 8 4 4 4 9 9 6 6 6 0.045 0.045 0.045 0.045 0.045 0.045 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 9 03.2009 02 Devices raised mounting Keylock switch actuator 2 positions Note: The keylock front bezel of the switch types 02-198.01x and 02-695.01x are factory-assembled and do not have to be ordered separately. Essential Accessories: d Front bezel flush page 13 d Keylock front bezel page 12 Technical drawing Circuit drawing 13 13 13 0.055 0.055 0.055 02-692.012 02-692.013 02-692.011 02-691.012 02-691.013 02-691.011 02-198.012 02-198.013 02-198.011 1 1 1 1 1 1 1 1 1 7 7 7 7 7 7 7 7 7 13 13 13 13 13 13 13 13 13 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 02-695.012 02-695.013 02-695.011 1 1 1 7 7 7 13 13 13 0.055 0.055 0.055 IP 40 2C A PT 2.8 PT 4.8 ST a 24 x 36 mm Typ-Nr. 02-690.012 02-690.013 02-690.011 IP 40 2C A Position A : lockable, non-actuated Standard lock YB1 Front plastic grey IP 40 2C A Position A : lockable, non-actuated or actuated Standard lock YB1 Front plastic grey (can be used with protective cover 22-925) Position A : lockable, non-actuated Position C : locked, key not removeable Standard lock YB1 Front plastic grey IP 40 2C A PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST IP 40 2C A PT 2.8 PT 4.8 ST Terminals Key remove 7 7 7 Contacts e 1 1 1 Front protection Mounting dimensions Continuation see next page 0 Keylock switch actuator 2 positions Position A : lockable, actuated Standard lock YB1 Front plastic grey Position A : lockable, non-actuated or actuated Standard lock YB1 Front plastic grey After turning the key 90 clockwise, the switch can be operated. In the unlocked positions the switch always performs a momentary action. Contacts: C = Changeover Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 10 03.2009 02 Devices raised mounting Mushroom-head keylock switch 2 positions A PT 2.8 PT 4.8 ST Circuit drawing Mushroom-head keylock switch 2 positions Position A : lockable, actuated Standard lock YB1 Mushroom-head cap plastic grey a 24 x 36 mm Typ-Nr. 02-199.012 02-199.013 02-199.011 Technical drawing Key remove 2C 0 Mounting dimensions Contacts IP 40 Terminals Front protection Continuation see next page e 1 1 1 8 8 8 14 14 14 0.055 0.055 0.055 Lens can be operated without key, twist to key release. Note: Switch gear is not usable for emergency-stop switch application! Contacts: C = Changeover Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 22, Technical drawing from page 22, Circuit drawing from page 25 11 03.2009 02 Accessories Front Lens Continuation see next page Lens 17.5 x 25.4 mm, illuminative (not recommended for film insert), ripped 17.5 x 25.4 mm, illuminative (use Holder for film insert) 17.5 x 25.4 mm, non-illuminative Lens Plastic blue translucent flush Plastic colourless transparent flush Plastic green translucent flush Plastic orange translucent flush Plastic red translucent flush Plastic smoked translucent flush Plastic white translucent flush Plastic yellow translucent flush Plastic colourless transparent flush Plastic green translucent flush Plastic red translucent flush Plastic black opaque flush Plastic grey opaque flush a 24 x 36 mm Typ-Nr. 02-901.6 02-901.7 02-901.5 02-901.3 02-901.2 02-901.1 02-901.9 02-901.4 02-902.7 02-902.5 02-902.2 02-901.0 02-901.8 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 Typ-Nr. 02-930.0 02-930.5 02-930.2 02-930.4 0.016 0.016 0.016 0.016 Typ-Nr. 02-980.1 0.020 02-982.1 0.020 Typ-Nr. 02-908.6 02-908.7 02-908.5 02-908.3 02-908.2 02-908.9 02-908.4 0.001 0.001 0.001 0.001 0.001 0.001 0.001 e Mushroom-head cap use Front bezel flush Continuation see next page Mushroom-head cap 23 x 35 mm Lens Plastic black opaque Plastic green opaque Plastic red opaque Plastic yellow opaque e Keylock front bezel Continuation see next page Keylock front bezel grey grey, for keylock switch 02-695 e Standard lock YB1, other lock numbers on request Holder Continuation see next page Holder for Lens with film insert 12 03.2009 Holder Plastic blue Plastic colourless Plastic green Plastic orange Plastic red Plastic white Plastic yellow e 02 Accessories Diffusor plate Continuation see next page e Typ-Nr. 02-909 0.001 a 24 x 36 mm Typ-Nr. 02-965.0 0.001 a 24 x 36 mm Typ-Nr. 02-967.0 0.001 Diffusor plate for Lens with film insert Front bezel flush Continuation see next page Front bezel flush Front bezel Plastic black e Front bezel raised Lens only removable with lens remover 98-969 Continuation see next page Front bezel raised Front bezel Plastic black e Protective cover use Front bezel flush a 24 x 36 mm Typ-Nr. 22-925 Protective cover hinged, transparent, with means for sealing Technical drawing Continuation see next page e 5 0.004 Technical drawing from page 22 Sprayproof cover use Front bezel flush IP 65 Typ-Nr. 02-924 IP 65 02-935 Technical drawing Sprayproof cover three-part, PVC (-20 C ... +60 C) three-part, Silicone (-25 C ... +85 C) Mounting dimensions Front protection Continuation see next page e 2 4 0.005 2 4 0.005 Mounting dimensions from page 22, Technical drawing from page 22 13 03.2009 02 Accessories Blind plug Blind plug Plastic black Plastic grey Blind plug Mounting dimensions Continuation see next page e 1 1 0.004 0.004 Typ-Nr. 02-989.001 0.001 Typ-Nr. 02-929 0.005 Typ-Nr. 10-1209.1329 10-1209.1279 10-1212.1199 10-1212.1279 10-1213.1249 10-1214.1249 10-1216.1229 10-1219.1199 10-1206.1369 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 a 24 x 36 mm Typ-Nr. 02-949.0 02-949.8 Mounting dimensions from page 22 Spare key Continuation see next page Spare key Standard lock YB1 e Other lock numbers on request > Backside Terminal cover all connection methods Continuation see next page Terminal cover unsuitable for indicators with built-in series resistor with lamp e > Illumination Filament lamp Continuation see next page Filament lamp 14 03.2009 Socket T6.8 Operating voltage/-current 12 VAC/DC, 100 mA 12 VAC/DC, 50 mA 24 VAC/DC, 25 mA 24 VAC/DC, 50 mA 28 VAC/DC, 40 mA 30 VAC/DC, 40 mA 36 VAC/DC, 35 mA 48 VAC/DC, 25 mA 6 VAC/DC, 200 mA e 02 Accessories Single-LED Continuation see next page Single-LED Socket T6.8 Light colour blue green red white diffuse yellow Operating voltage/-current 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA e Typ-Nr. 10-2K09.1076 10-2K12.1076 10-2K13.1076 10-2K19.1056 10-2K06.3156 10-2K09.1075 10-2K12.1075 10-2K13.1075 10-2K19.1055 10-2K06.3155 10-2K09.1072 10-2K12.1072 10-2K13.1072 10-2K19.1052 10-2K06.3152 10-2K09.1079 10-2K12.1079 10-2K13.1079 10-2K19.1059 10-2K06.3159 10-2K09.1074 10-2K12.1074 10-2K13.1074 10-2K19.1054 10-2K06.3154 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 Operating voltage 230/240 V Typ-Nr. 02-904.7 0.003 110 V 125 V 145 V 02-904.0 02-904.1 02-904.3 0.003 0.003 0.003 Typ-Nr. 02-912.2 e 0.045 02-912.3 02-912.4 02-912.1 0.090 0.095 0.025 Note: AC operation through halve-wave rectifier possible, slight flickering can occure. Series resistor for lamp voltage reduction Continuation see next page Series resistor 10 k, for filament lamp 48 VAC, 25 mA 2.7 k, for filament lamp 48 VAC, 25 mA 3.3 k, for filament lamp 48 VAC, 25 mA 4.7 k, for filament lamp 48 VAC, 25 mA e Please keep to the country specific security rules. Terminal plate empty for fitting with series resistors Continuation see next page Terminal plate empty 10 spaces 125 x 60 x 15 mm 15 spaces 187.5 x 60 x 15 mm 20 spaces 250 x 60 x 15 mm 5 spaces 62.5 x 60 x 15 mm 15 03.2009 02 Accessories > Assembling Lens remover Continuation see next page Lens remover for flush front bezel for raised front bezel e Typ-Nr. 02-905 0.011 98-968 0.004 Typ-Nr. 61-9740.0 0.011 0.004 Lamp remover Continuation see next page Lamp remover Filament lamp LED CAUTION A switching process might be released when replacing the Lamp/LED ! 16 03.2009 03-996 02 Technical Data Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 61058-1 Actuator with snap-action switching element Switching system 1 or 2 self-cleaning, snap-action switching elements. 1 or 2 double-throw contacts. Environmental conditions Storage temperature -30 C ... +85 C Material Service temperature -25 C ... +55 C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Material of contact Standard version: Silver (U >20 V) Special versions: (on request) Gold/Silver 700 Au/300 Ag (U <50 V) Silver/Palladium 700 Ag/300 Pd (U >20 V) for atmospheres containing sulphur Protection degree Front side IP 40, IP 65 with spray cover, as per IEC 60529 Shock resistance 15 g for 11 ms, as per IEC 60068-2-27 Switch housing Thermosetting material, heat-resistant Vibration resistance 10 g at 10-2000 Hz, amplitude 1.0 mm, as per IEC 60068-2-6 Indicator housing with reduced length Polyamide Mechanical characteristics Approvals Approbations CB (IEC 61058-1/92) CSA ENEC (EN 61058-1/92) Germanischer Lloyd UL VDE Terminals Screw terminal (with self-lifting clip): max. wire cross-section, 2 x 2.5 mm max. wire cross-section of stranded cable, 2 x 1.5 mm Plug-in terminal 2.8 x 0.8 mm: max. wire cross-section of stranded cable, 1 mm can also be used as soldering terminal max. wire cross-section, 2 x 1 mm max. wire cross-section of stranded cable: 2 x 0.75 mm Declaration of conformity CE > Buzzer Plug-in terminal 4.8 x 0.8 mm: max. wire cross-section of stranded cable, 2.5 mm can also be used as soldering terminal max. wire cross-section: 2 x 1mm max. wire cross-section of stranded cable, 2 x 0.75 mm Actuating force 6 N ... 12 N Buzzer system System Electronic non-contacting buzzer with IC oscillator Material Actuating travel 5 mm Mechanical lifetime Momentary action 2 million operations Maintained action 1 million operations Electrical characteristics Standards The switches comply with the "Standards for low-voltage switching devices" EN IEC 61058-1 Rated insulation voltage 400 VAC/440 VDC, as per IEC 61058-1 Conventional free air thermal current 10 A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. Switch rating 400 VAC, 10 A, cos 0.95, as per IEC 61058-1 250 VAC, 10 A, as per UL Alarm buzzer case Thermosetting material Front cap Polycarbonate (PC) Front bezel Polymethylacrylate Mechanical characteristics Terminals Screw terminal Electrical characteristics Frequency (tone) Approx. 2.8 kHz Sound pressure 85 dB (A) 8 dB at a distance of 0.1 m Volume variable with a 1 M potentiometer or corresponding fixed resistor 17 03.2009 Technical Data Operation Voltage/Current typical 0 10 ... 55 VAC 25 mA 10 ... 75 VDC 15 mA Environmental conditions Storage temperature -40 C ... +85 C Operating temperature -25 C ... +55 C Protection degree Front side IP 40, as per IEC 60529 Approvals Approbations CB (IEC 61058-1/92) ENEC (EN 61058-1/92) Declaration of conformity CE 18 03.2009 02 02 Typical Applications Buzzer c f c f c f c f d g d g d g d g e h e h e h e h U U 0 1. Supply voltage I 2. Supply voltage II 3. Intermittent tone Continous tone Continous tone Interval approx. 3 Hz U = 10 - 35 VAC U = 35 - 55 VAC U = 10 - 50 VDC U = 35 - 75 VDC 4. Volume control 19 03.2009 02 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2. The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load! 0 Counter emf over load without free-wheeling diode Fig. 2 Switching with inductive load Fig. 1 Switch ON OFF 0 VDC + _ Free-wheeling diode 20 03.2009 Inductive load Sveral hundred to several thousend volts e=L di __ dt 02 Marking General notes 0 2. Hot stamping For larger series it is worth considering markings by means of hot stamping We will pleased to advise you. For letters and figures, typefaces with 2.5 mm, 3 mm and 4 mm are available. 1. Engraving In addition to the most commonly used world languages, in DIN 1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. Red, blue and black lenses are filled with white colour. Other colour lenses are filled in black. Standard height of letters is 3 mm. If the height is not specified, we will supply 3 mm engraved letters. 3. Film inserts Instead of using engraving the lenses can be fitted with transparent film inserts, as an alternative. For this purpose, though, it is advisible to use lenses without ripped pattern. In the case of use of a smoke-black lens the fitted film becomes readable only if the lamp is on. The film (F) is inserted in the cap. To ensure even illumination a diffusor (D) is recommended, which is inserted beneath the film. If, on the other hand, the diffusor is inserted above the film, the lettering only becomes legible when the lamp is alight. To hold the film and diffusor in position, the use of a holder (N) is advised. The film thickness is 0.2 mm. All dimensions in mm 0 Film insert max. size 14.3 x 22.4 Height of letters h 3 Number of lines 4 2 4 2 3 1 2 1 Number of (target value) capital letters per line 11 7-8 7 5 5-6 3-4 5 3 3 2 4 5 6 8 Number of (target value) small letters per line 13 8-9 9 5-6 6-7 4 6 4 4 2 Image B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 0 D B2 ABC abc ABC abc h F B1 N 21 03.2009 Drawings 02 Mounting dimensions +0.2 0 21.2 24 min. 1 Indicator actuator page 5 | Buzzer page 6 | Pushbutton actuator page 7 | Illuminated pushbutton actuator page 8 | Mushroom-head pushbutton actuator page 9 | Keylock switch actuator 2 positions page 10 | Mushroom-head keylock switch 2 positions page 11 | Blind plug page 14 29.2 +0.2 0 36 min. 2 Sprayproof cover page 13 Technical drawing 1 Indicator actuator page 5 2 Indicator actuator page 5 22 03.2009 02 Drawings 3 Buzzer page 6 4 Sprayproof cover page 13 5 Protective cover page 13 6 Pushbutton actuator page 7 | Illuminated pushbutton actuator page 8 23 03.2009 Drawings 7 Keylock switch actuator 2 positions page 10 8 Mushroom-head keylock switch 2 positions page 11 9 Mushroom-head pushbutton actuator page 9 24 03.2009 02 02 Drawings Circuit drawing 1 Buzzer page 6 2 Indicator actuator page 5 3 Illuminated pushbutton actuator page 8 4 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9 5 Illuminated pushbutton actuator page 8 6 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9 7 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9 8 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9 25 03.2009 Drawings 9 Pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 9 10 Illuminated pushbutton actuator page 8 11 Illuminated pushbutton actuator page 8 12 Illuminated pushbutton actuator page 8 13 Keylock switch actuator 2 positions page 10 14 Mushroom-head keylock switch 2 positions page 11 26 03.2009 02 Index from Typ-Nr. Typ-Nr. 02-021.001 02-021.002 02-021.003 02-070.001 02-070.002 02-070.003 02-071.001 02-071.002 02-071.003 02-072.001 02-072.002 02-072.003 02-073.001 02-073.002 02-073.003 02-198.011 02-198.012 02-198.013 02-199.011 02-199.012 02-199.013 02-611.011 02-611.011 02-611.012 02-611.012 02-611.013 02-611.013 02-612.011 02-612.011 02-612.013 02-612.013 02-613.011 02-613.011 02-613.012 02-613.012 02-613.013 02-613.013 02-614.011 02-614.011 02-614.012 02-614.012 02-614.013 02-614.013 02-615.011 02-615.011 02-615.012 02-615.012 02-615.013 02-615.013 02-616.011 02-616.012 02-616.013 02-617.011 02-617.012 02-617.013 02-618.011 02-618.012 02-618.013 02-619.011 02-619.012 02-619.013 02-620.011 02-620.012 Page ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................... 5 ................................. 10 ................................. 10 ................................. 10 ................................. 11 ................................. 11 ................................. 11 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 7 ................................... 9 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 ................................... 8 Typ-Nr. Page 02-620.013 ................................... 8 02-690.011 ................................. 10 02-690.012 ................................. 10 02-690.013 ................................. 10 02-691.011 ................................. 10 02-691.012 ................................. 10 02-691.013 ................................. 10 02-692.011 ................................. 10 02-692.012 ................................. 10 02-692.013 ................................. 10 02-695.011 ................................. 10 02-695.012 ................................. 10 02-695.013 ................................. 10 02-810.001 ................................... 6 02-901.0 ..................................... 12 02-901.1 ..................................... 12 02-901.2 ..................................... 12 02-901.3 ..................................... 12 02-901.4 ..................................... 12 02-901.5 ..................................... 12 02-901.6 ..................................... 12 02-901.7 ..................................... 12 02-901.8 ..................................... 12 02-901.9 ..................................... 12 02-902.2 ..................................... 12 02-902.5 ..................................... 12 02-902.7 ..................................... 12 02-904.0 ..................................... 15 02-904.1 ..................................... 15 02-904.3 ..................................... 15 02-904.7 ..................................... 15 02-905 ........................................ 16 02-908.2 ..................................... 12 02-908.3 ..................................... 12 02-908.4 ..................................... 12 02-908.5 ..................................... 12 02-908.6 ..................................... 12 02-908.7 ..................................... 12 02-908.9 ..................................... 12 02-909 ........................................ 13 02-912.1 ..................................... 15 02-912.2 ..................................... 15 02-912.3 ..................................... 15 02-912.4 ..................................... 15 02-924 ........................................ 13 02-929 ........................................ 14 02-930.0 ..................................... 12 02-930.2 ..................................... 12 02-930.4 ..................................... 12 02-930.5 ..................................... 12 02-935 ........................................ 13 02-949.0 ..................................... 14 02-949.8 ..................................... 14 02-965.0 ..................................... 13 02-967.0 ..................................... 13 02-980.1 ..................................... 12 02-982.1 ..................................... 12 02-989.001 ................................. 14 03-996 ........................................ 16 10-1206.1369 ............................. 14 10-1209.1279 ............................. 14 10-1209.1329 ............................. 14 10-1212.1199 ............................. 14 Typ-Nr. Page 10-1212.1279 ............................. 14 10-1213.1249 ............................. 14 10-1214.1249 ............................. 14 10-1216.1229 ............................. 14 10-1219.1199 ............................. 14 10-2K06.3152 ............................. 15 10-2K06.3154 ............................. 15 10-2K06.3155 ............................. 15 10-2K06.3156 ............................. 15 10-2K06.3159 ............................. 15 10-2K09.1072 ............................. 15 10-2K09.1074 ............................. 15 10-2K09.1075 ............................. 15 10-2K09.1076 ............................. 15 10-2K09.1079 ............................. 15 10-2K12.1072 ............................. 15 10-2K12.1074 ............................. 15 10-2K12.1075 ............................. 15 10-2K12.1076 ............................. 15 10-2K12.1079 ............................. 15 10-2K13.1072 ............................. 15 10-2K13.1074 ............................. 15 10-2K13.1075 ............................. 15 10-2K13.1076 ............................. 15 10-2K13.1079 ............................. 15 10-2K19.1052 ............................. 15 10-2K19.1054 ............................. 15 10-2K19.1055 ............................. 15 10-2K19.1056 ............................. 15 10-2K19.1059 ............................. 15 22-925 ........................................ 13 61-9740.0 ................................... 16 98-968 ........................................ 16 27 03.2009 Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail EAO reserves the right to alter specifications without further notice E-mail Website EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com