2014-01-10 Silicon PIN Photodiode Silizium-PIN-Fotodiode Version 1.1 SFH 206 K Features: Besondere Merkmale: * Especially suitable for applications from 400 nm to 1100 nm * Short switching time (typ. 20 ns) * 5 mm LED plastic package * Also available on tape and reel * Speziell geeignet fur Anwendungen im Bereich von 400 nm bis 1100 nm * Kurze Schaltzeit (typ. 20 ns) * 5-mm-Plastikbauform im LED-Gehause * Auch gegurtet lieferbar Applications Anwendungen * * * * Photointerrupters Industrial electronics For control and drive circuits Computer-controlled flashes * * * * Lichtschranken Industrieelektronik Messen / Steuern / Regeln Computer-Blitzlichtgerate Ordering Information Bestellinformation Type: Ordering Code Typ: Bestellnummer SFH 206 K Q62702P0129 2014-01-10 1 Version 1.1 SFH 206 K Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating and storage temperature range Betriebs- und Lagertemperatur Top; Tstg -40 ... 100 C Reverse voltage Sperrspannung VR 32 V Total power dissipation Verlustleistung Ptot 150 mW Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Bezeichnung Symbol Spectral sensitivity Fotoempfindlichkeit (VR = 5 V, standard light A, T = 2856 K) S Wavelength of max. sensitivity Wellenlange der max. Fotoempfindlichkeit S max 850 nm Spectral range of sensitivity Spektraler Bereich der Fotoempfindlichkeit 10% 400 ... 1100 nm Radiant sensitive area Bestrahlungsempfindliche Flache A Dimensions of radiant sensitive area Abmessung der bestrahlungsempfindlichen Flache LxW Half angle Halbwinkel 60 Dark current Dunkelstrom (VR = 10 V) IR 2 ( 30) Spectral sensitivity of the chip Spektrale Fotoempfindlichkeit des Chips ( = 850 nm) S typ 0.62 A/W Quantum yield of the chip Quantenausbeute des Chips ( = 850 nm) 0.90 Electro ns /Photon 2014-01-10 2 Werte Unit 80 ( 50) Einheit nA/Ix 7.02 mm2 2.65 x 2.65 mm x mm nA Version 1.1 SFH 206 K Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Open-circuit voltage Leerlaufspannung (Ev = 1000 lx, Std. Light A) VO 365 ( 310) mV Short-circuit current Kurzschlussstrom (Ev = 1000 lx, Std. Light A) ISC 80 A Rise and fall time Anstiegs- und Abfallzeit (VR = 5 V, RL = 50 , = 850 nm, IP = 800 A) tr, tf 0.02 s Forward voltage Durchlassspannung (IF = 100 mA, E = 0) VF 1.3 V Capacitance Kapazitat (VR = 0 V, f = 1 MHz, E = 0) C0 72 pF Temperature coefficient of VO Temperaturkoeffizient von VO TCV -2.6 mV / K Temperature coefficient of ISC Temperaturkoeffizient von ISC (Std. Light A) TCI 0.18 %/K Noise equivalent power Rauschaquivalente Strahlungsleistung (VR = 10 V, = 850 nm) NEP 0.041 pW / Hz1/2 Detection limit Nachweisgrenze (VR = 10 V, = 850 nm) D* 6.5e12 cm x Hz1/2 / W 2014-01-10 3 Version 1.1 SFH 206 K Photocurrent / Open-Circuit Voltage Fotostrom / Leerlaufspannung IP (VR = 5 V) / VO = f(Ev) Relative Spectral Sensitivity Relative spektrale Empfindlichkeit Srel = f() OHF00078 100 S rel % 80 60 40 20 0 400 500 600 700 800 900 nm 1100 Dark Current Dunkelstrom IR = f(VR), E = 0 Total Power Dissipation Verlustleistung Ptot = f(TA) OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 2014-01-10 0 20 40 60 80 C 100 TA 4 Version 1.1 SFH 206 K Dark Current Dunkelstrom IR = f(TA), VR = 10 V, E = 0 Capacitance Kapazitat C = f(VR), f = 1 MHz, E = 0 OHF00082 10 3 R nA 10 2 10 1 10 0 10 -1 0 20 40 60 80 C 100 TA Directional Characteristics Winkeldiagramm Srel = f() 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2014-01-10 1.0 0.8 0.6 0.4 0 5 20 40 60 80 100 120 Version 1.1 SFH 206 K Package Outline Mazeichnung Area not flat 6.9 (0.272) 0.6 (0.024) x 0.5 (0.020) 0.4 (0.016) x 0.3 (0.012) 1.8 (0.071) 1.2 (0.047) 34 (1.339) 32 (1.260) 4.7 (0.185) 4.0 (0.157) Cathode 5.1 (0.201) 2.54 (0.100) spacing 0.8 (0.031) 0.4 (0.016) 6.3 (0.248) 0.8 (0.031) Radiant sensitive area 4.1 (0.161) 3.7 (0.146) GEOY6647 Dimensions in mm (inch). / Mae in mm (inch). Package 5mm Radial (T 1 3/4), Epoxy Gehause 5mm Radial (T 1 3/4), Harz 2014-01-10 6 Version 1.1 SFH 206 K 4.8 (0.189) Recommended Solder Pad Empfohlenes Lotpaddesign TTW Soldering / Wellenloten (TTW) 4 (0.157) OHLPY985 Dimensions in mm (inch). / Mae in mm (inch). 2014-01-10 7 Version 1.1 SFH 206 K TTW Soldering Wellenloten (TTW) IEC-61760-1 TTW / IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 2014-01-10 8 Version 1.1 SFH 206 K Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2014-01-10 9 Version 1.1 SFH 206 K Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2014-01-10 10