tycao Electronics Specification Control Drawing Raychem a) Part as supplied. = O > b) Part after unrestricted recovery. Q a) RY > 4.5 {0.18} 0. 12) 2O2K1** Dia Potting Port Dia Potting Port 100 H DIA - 4 J DIA ' 5 I. > .. ~<a a V 2.0mm iA HOLE in millimetres DIMENSIONS fin inches, for reference} H J P R S T UEV JO HW JW Xx Y Part No. Min Max Min Max 410% +104 +10% +10% +10K +104 +420% 420K +20% +20% a b a b b b b b b b b b b b @ 302K121 24 10.4 14 5.6 38 21 3.0 1.0 12 8.5 1.6 0.9 24 13 {0.94} {0.41} (0.55) {0.22} (1.50) {0.83} {0.12} {0.04} {0.47} {0.33} (0.06) {0.04} Cn {0,51} 2 @ 302K 132 30 14.2 15 5.9 55 32 3.0 1.0 12 11.5 1.8 1.0 24 18 {1.18} {0.56} {0.59} {0.23} (2.17) {1.26} {0.12} {0.04} {0.47) {0.45} (0.07) {0.04) {0.94} {0.71} 202K142 31 18.0 18 7.1 67 35 3.0 1.0 20 17.0 1.8 1.0 32 25 {1,22} {0.71} {0.71} {0.28} {2.64} {1.38) {0.12} {0.04} {0.79} {0.67} {0.07} {0.04) {1.26} {0,98} @ 202K153 36 22.4 21 8.4 80 42 3.0 1.0 20 19.5 2.0 1.0 32 30 {1.42} {0.88} {0.83} {0.33} (3.15) {1.65} {0.12} {0.04} {0.79} {0.77} {0.08} {0.04} {1.26} (1. 18} 202K163 43 28.2 25 3.9 99 61 3.0 1.7 20 21.0 2.2 1.0 52 30 {1.69} {1.11} {0.98} {0.39} {3.90} {2.40} {0.12} {0.07} {0.79} {0.83} {0.09} {0.04} {2.05} {1.18} 202K174 52 35.1 39 15.7 130 72 3.0 1.7 20 39.0 3.2 1.5 52 50 {2.05} {1.38} {1.54} {0.62} {5.12} {2.83} {0.12} {0.07} {0.79} {1.54} {0.13} {0.06} {2.05} (1.97} 202K 185 66 44.5 42 16.8 170 390 3.0 2.0 20 51.5 3.8 2.0 52 70 {2.60} {1.75} {1.65} {0.66} {6.69} {3.54) {0.12} {0.08} {0.79} {2.03} {0.15} {0.08} {2.05) (2.76} @) See over for explanation of Notes Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Approval Design Checked MKTG. Issue Q.A. 4 Date February 2007 Conforms to ISO Recommendations 3rd Angle Projection Not to Scale So Page 1 of 2 202K 1 XX-100 Part Number Specification Control Drawing Raychem Iss. Date 202K1**100 Issue 4 E.C.R. No. Details of Change 2 December 1985 | 4502 May 1990 KKK 4 February 2007 | CRO6-HM-012 Redrawn Redrawn, was on 2 seperate drawings Imperial dimensions added (Ordering Information) 202K 1 *-100/7X-O Adhesive Slash Number Cif required see compatibility chart) Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) SPEC Number Material Dash Number Material Description Coating Slash Number NOTES Supplied with 2 Lips only, Dimension V does not apply. Potting Port xX @ 90 to Potting Port Y on 202kK121. Potting Ports are optional, when specified by suffix -00 they will be Located as shown. As suppLied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. If eyelet clip COOOW2T2) is required with part then add CS-1858 to description Ci.e. 202K132-100-0-CS-1858) . Tyco Electronics UK Ltd. Faraday Road, Swindon, Wiltshire, SN3 SHH EngLand Telephone: (01793) 528171 Fax: 572516 Tyco Electronics Corporation 300, Constitution Drive, Menlo Park, CA 934025 USA Telephone (650) 361-3860 Fax: (650) 361-5579 K1010 Cage Code Cage Code 060390 Page 2 of 2