DO NOT
SCALE FROM
THIS PRINT
MEC8-1XX-XX-XX-DV-XX
No OF POSITIONS
-10, -20, -30, -35, -40,
-45, -50, -60, -70
ROW SPECIFICATION
-DV: DUAL VERTICAL
(USE MEC8-XX-XX-DV-XX)
CARD THICKNESS
-01: 1mm [.039] THICK CARD
-02: 1.57mm [.062] THICK CARD
PLATING SPECIFICATION
OPTION
-A: ALIGNMENT PINS
(USE MEC8-XX-XX-DV-A)
-LC: LOCKING CLIP(SEE NOTE 5)
(USE LC-05-TM)
-K: POLYAMIDE FILM PAD
(USE K-DOT-.217-.313-.005)(SEE FIG. 3)
-TR: TAPE & REEL
*=NOT RELEASED
Y
(No OF POS x 0.800 [.0315]) + 4.60 [.181] REF
7.00 .28
REF
(No OF POS x 0.800 [.0315]) + 1.400[.0551] REF
"E" REF
4.40 .17
REF
0.80
±0.05
.031
±.002
(TOL NON ACCUM)
(No OF POS -1 ) x 0.800 [.0315]
2.70 .11
REF
"A"
"A"
01
59
60
02
C
C
L
0.90
REF
.04
8.50 .33
REF
3.60 .14
REF
(No OF POS x 0.800[.0315]) + 2.200[.0866] REF
POSITION #1
INDICATOR
-A OPTION SHOWN
MEC8-XX-XX-DV-A
L
C
0.25
REF
.01
1.49 .06
(No OF POS x 0.800[.0315]) + 2.200[.0866]
-LC OPTION SHOWN
MEC8-XX-XX-DV
L
C
1.50 .06
REF
C
L
1.35 .05
8.65
±0.15
.341
±.006
(TYP)
"F"
.11 [.004]
8.80 .35
0.90
±0.15
(TYP)
.04
±.006
"G"
1.05 .04
REF (TYP)
SECTION "A"-"A"
1.13 x 60
REF
C
C
C
SEE CONTACT
(TABLE 4)
C
L
C
DESIGNED & DIMENSIONED
IN MILLIMETERS
(INCHES FOR REFERENCE ONLY)
FIG 1
FOR POSITIONS -10, -20, -30 & -35
(SHOWN: MEC8-130-01-XX-DV-XX AS NOTED)
C
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-C: 50µ" ELECTRO-POLISHED SELECTIVE GOLD,
IN CONTACT AREA, MATTE TIN ON TAIL
C
-L: 10µ" SELECTIVE GOLD, IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
*=NOT RELEASED
Y
C
Y
SEE TABLE 1
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MM.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.3 [.01] 2
.XXX:
.13 [.005]
.XXXX:
.051 [.0020]
MATERIAL:
0.8mm DUAL VERTICAL MOUNT MINI-EDGE CARD ASSEMBLY
BY:
MEC8-1XX-XX-XX-DV-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CHAD F
04/09/2002
2
1
SHEET SCALE: 1:0.4
INSULATOR: LCP
-01: COLOR: NATURAL
-02: COLOR: BLACK
CONTACT: PHOS BRONZE
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-DV-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.04[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: .5 LB.
4. ASSEMBLIES TO BE PACKAGED IN TRAYS UNLESS
-TR OPTION IS SPECIFIED.
5. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH
THE –LC OPTION."
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION Y
"A" REF
"D" REF
(No OF POS x 0.80[.0315]) + 7.80[.307] REF
0.80
±0.05
.031
±.002
(TOL NON-ACCUM)
"B" SPACES @ .800 = "C"
4.00 .16
2.70
REF
.11
(No OF POS + 3) x 0.800[.0315]
01
02
79
80
C
C
C
1.35 .05
((No OF POS + 6) x 0.80[.0315]) + 0.60[.024] REF
1.50
REF
.06
C
L
"R"
5.50 .22
"S"
0.55 .02
FIG 3
-K OPTION
(USE K-DOT-.217-.313-.005)
8.78 .35
FOR POSITIONS -40 THRU 70
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-140-01-XX-DV-A)
FIG 2
* = NOT RELEASED FOR SALE
Y
SHEET OF
0.8mm DUAL VERTICAL MOUNT MINI-EDGE CARD ASSEMBLY
BY:
MEC8-1XX-XX-XX-DV-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CHAD F
04/09/2002
2
2
SHEET SCALE: 1:0.444444
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-DV-XX-MKT.SLDDRW
REVISION Y
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322