92
LED Driver
- General Series
- Outdoor Use
- A Series
LED Driver
- General Series
- Outdoor Use
- Half Potted Series
LED Driver
- Intelligent Series
- 50W Intelligent Series
LED Driver
- Intelligent Series
- 96W Intelligent Series
LED Driver
- Intelligent Series
- 30W Intelligent Series
LED Driver
- Intelligent Series
- 40W Intelligent Series
LED Driver
- Intelligent Series
- Other Series
Numbering
System
Quick
Selection
General
Power Supplies
- MF Series
SPD
Appendix
LED Driver
- General Series
- Outdoor Use
- Other Series
LED Driver
- General Series
- Outdoor Use
- H Series
126×76×30mm
■ Features
• Compliant with Class 2 Power supply safety standards
• Constant current LED driver
• Support DMX/RDM dimming
• 1 LED channel, output current can be changed from 200mA to
1800mA
• Mode of wiring: At the bottom of wiring.
• Constant power maximum is 40W
• Normal life time is 50000 hours（at the case's temperature of
75℃）
• Dimming range 0.1%~100%
• Protection compliant with IP20
• CUL / CE
• 5-year warranty
■ Safety & EMC Compliance
■ Electrical Specifications
Input voltage range 100 - 277 V
Frequency 50 / 60 Hz
Input current 0.6A
Inrush current ＜15A
Rated power 40W
Power factor >0.95（230V,50Hz,full loaded）
Effiency 86 - 88 %（230V,50Hz,full loaded）
Output voltage range 8 - 50 V
Output current range 200-1800mA
Protections Thermal protection,short-circuit protection,no-load protection,over-power protection
■ Environmental Specifications
Operating temperature -25℃ - +63℃
Storage temperature -40℃ - +85℃
Maximum case temperature 86℃
Cooling method Convection
Life time 50,000 hours at tc 75℃
Reference dimension( LxWxH) 126×76×30 mm
40W Intelligent Series - MU040I180AQI52 (DMX,1ch)
CUL UL8750,UL1310,CAN/CSA-C22.2 NO.223-M91
CE EN61347-1,EN61347-2-13
Conducted Emissions FCC Part15 Class B /EN55015
Radiated Emissions FCC Part15 Class B /EN55015
Harmonic Current Emissions EN 61000-3-2
Voltage Fluctuations and Flicker EN 61000-3-3
Electrostatic Discharge EN 61000-4-2
RFE Field Susceptibility EN 61000-4-3
Electrical Fast Transient EN 61000-4-4
Surge immunity test EN61000-4-5 (Surge: L-N 1KV ,L/N-Earth 2KV)
Conducted Radio Frequency EN 61000-4-6
Power Frequency Magnetic Field Test EN 61000-4-8
Voltage Dips EN 61000-4-11
Electromagnetic Immunity EN61547
93
LED Driver
- General Series
- Outdoor Use
- A Series
LED Driver
- General Series
- Outdoor Use
- Half Potted Series
LED Driver
- Intelligent Series
- 50W Intelligent Series
LED Driver
- Intelligent Series
- 96W Intelligent Series
LED Driver
- Intelligent Series
- 30W Intelligent Series
LED Driver
- Intelligent Series
- 40W Intelligent Series
LED Driver
- Intelligent Series
- Other Series
Numbering
System
Quick
Selection
General
Power Supplies
- MF Series
SPD
Appendix
LED Driver
- General Series
- Outdoor Use
- Other Series
LED Driver
- General Series
- Outdoor Use
- H Series
■ Function Description
• DMX/RDM
DMX+ 、 DMX-、Shield are the interfaces of DMX/RDM.
• MCS technology
Connect Smartkey to the driver through MCS( Multifunctional Configuration Settings) ports. With MOONS'
Configuarator software, you can set the MAX current of the driver( each step is 1 mA),dimming curve type, DMX start
address, etc.Please refer to specification of Smartkey to get specific information.
• Temperature Detection
In order to protect the LED, the temperature of LED is detected by a NTC. When the temperature exceeds the point
which can be set by Smartkey, the output current can be decreased automatically, but not less than 25%.
• Constant Output Power
The driver can satisfy the curve of constant output power within a large range of output current and voltage.
• Protection
Thermal Protection
When the temperature of the inside PCB exceeds 110℃, output current will be decreased to 50%. And it can not
recover until the temperture drops to 70℃.
Short-circuit Protection
Once the output short-circuits, the output will be cut off automatically. Then the driver will try to restart every 4s.
No-load Protection
The driver operating with no load will not be damaged, and it will try to restart every 4s. So the driver supports hot plug
in.
Over-Power Protection
If the total power exceeds 50W, the output current of each channel will decrease to 50%，and then the maximum
output power is increased to 40W gradually.
• Online Update
Connect Smartkey to PC through a USB port, then connect Smartkey to the driver correctly to update.
Please refer to the specification of Smartkey.
■ Mechanical Outline (unit: mm)
116
126
30
50.8
76
18
56.2
7
106
8/32 UNC
36
■ Schematic Diagram
{
{
100-277 VAC
L
N
PG
Shield
+
-
{
MCS / NTC
+
-
{
LED Group
+
-
DMX
