Du line Transmitter for Digital Signals Type G 3420 5502 (R) Fieldbus Installationbus * 8-channel transmitter * 8 opto-isolated voltage inputs: 6 to 265 VAC/DC * H4-housing * For mounting on DIN-rail (EN 50022) * LED-indications for supply, input activated and Dupline(R) carrier * AC or DC power supply * Channel coding by GAP 1605 Ordering Key Product Description (R) Dupline transmitter for external supply. Detects the signals from 8 devices with volt- age outputs of up to 265 VAC/DC, e.g. the presence of mains supply to machinery. Type Selection Supply 24 VAC 115 VAC 230 VAC 10 to 30 VDC Input current limiter Inrush current Operating time for signal "1" Operating time for signal "0" Cable length Dielectric voltage Inputs - Dupline(R) Type: Dupline(R) H4-housing Transmitter No. of channels Input type Power supply Supply Specifications Ordering no. 8 channels 6 to 265 VAC/DC G 3420 5502 024 G 3420 5502 115 G 3420 5502 230 G 3420 5502 800 Input Specifications Inputs Input voltage range VBB Frequency range on AC Input voltage for signal "0" Input voltage for signal "1" Input current for signal "1" G 3420 5502 024 8 voltage-type 6 to 265 VAC/DC 45 to 400 Hz 1 VAC/DC 6 VAC/DC Typ. 10 mA (VBB 10-18 VDC) lower at other input voltages Yes 450 mA (at VBB = 265 VDC) 1 pulse train + 3 ms 1 pulse train + 50 ms 25 m 4 kVAC (rms) Power supply AC types Rated operational voltage through term. 21 & 22 230 115 024 Frequency Voltage interruption Rated operational power Power dissipation Rated impulse withstand voltage 230 115 024 Dielectric voltage Supply - Dupline(R) Supply - Inputs Power supply DC type Rated operational voltage through term. 21 & 22 800 Ripple Reverse-polarity protection Power consumption Power dissipation Inrush current Rated impulse withstand voltage Dielectric voltage Supply - Dupline(R) Supply - Inputs Specifications are subject to change without notice (30.04.03) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group Overvoltage cat. III (IEC 60664) 230 VAC, 15% 115 VAC, 15% 24 VAC, 15% 45 to 65 Hz 40 ms Typ. 4.5 VA 8W 4 kV 2.5 kV 800 V 4 kVAC (rms) 4 kVAC (rms) Overvoltage cat. III (IEC 60664) 10 to 30 VDC (ripple included) 3V Yes <1W 5.5 W 1A 800 V 200 VAC (rms) 4 kVAC (rms) 1 Du line G 3420 5502 (R) Fieldbus General Specifications Mode of Operation Power ON delay Power OFF delay Output OFF delay upon loss of Dupline(R) carrier Indication for Supply ON Input activated Dupline(R) carrier Environment Degree of protection Pollution degree Operating temperature Storage temperature Humidity (non-condensing) Mechanical resistance Shock Vibration Dimensions Material (see "Technical Information") Weight 8-channel transmitter with 8 voltage inputs (6 to 265 VAC/DC). Typ. 2 s 1s 20 ms Each input may be coded individually by means of the code programmer GAP 1605. For details, please refer to the respective data sheet. LED, green LED, red LED, yellow IP 20 3 (IEC 60664) -20 to +50C (-4 to +122F) -50 to +85C (-58 to +185F) 20 to 80% When a voltage (6 to 265 VAC/DC) is applied to terminal 25 (input 1), the transmitter transmits on the channel coded for input 1. 15 G (11 ms) 2 G (6 to 55 Hz) Whenever the voltage of the input is < 1 V, the transmitter Installationbus stops transmitting on the respective channel. Notes: - Terminals 4 and 24 are internally connected. - Terminals 4 and 24 are common (minus). Input connections Input 1: terminals 24 & 25 Input 2: terminals 24 & 26 Input 3: terminals 24 & 27 Input 4: terminals 24 & 28 Input 5: terminals 4 & 5 Input 6: terminals 4 & 6 Input 7: terminals 4 & 7 Input 8: terminals 4 & 8 H4-housing 250 g Operation Diagram Power supply Input 1 (term. 25) Transmission on chan. for input 1 Input 8 (term. 8) Transmission on channel for input 8 Dimensions (mm) Wiring Diagram H4-housing 5 6 7 8 1 ~ ~ (+) (-) S: signal wire 2 3 4 - VBB + + VBB - Power supply Accessories DIN-rail FMD 411 For further information, see "Accessories". 2 Specifications are subject to change without notice (28.09.99) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group