Du line®
Fieldbus Installationbus
Specifications are subject to change without notice (30.04.03) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description Ordering Key
Type: Dupline®
H4-housing
Transmitter
No. of channels
Input type
Power supply
Transmitter for Digital Signals
Type G 3420 5502
•8-channel transmitter
•8 opto-isolated voltage inputs:
6 to 265 VAC/DC
•H4-housing
•For mounting on DIN-rail (EN 50022)
•LED-indications for supply, input activated and
Dupline®carrier
•AC or DC power supply
•Channel coding by GAP 1605
Supply Ordering no.
8 channels
6 to 265 VAC/DC
24 VAC G 3420 5502 024
115 VAC G 3420 5502 115
230 VAC G 3420 5502 230
10 to 30 VDC G 3420 5502 800
Dupline®transmitter for exter-
nal supply. Detects the sig-
nals from 8 devices with volt-
age outputs of up to 265
VAC/DC, e.g. the presence of
mains supply to machinery.
Type Selection Supply Specifications
Power supply AC types
Overvoltage cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22 230 230 VAC, ±15%
115 115 VAC, ±15%
024 24 VAC, ±15%
Frequency 45 to 65 Hz
Voltage interruption ≤40 ms
Rated operational power Typ. 4.5 VA
Power dissipation ≤8 W
Rated impulse withstand
voltage 230 4 kV
115 2.5 kV
024 800 V
Dielectric voltage
Supply - Dupline®≥4 kVAC (rms)
Supply - Inputs ≥4 kVAC (rms)
Power supply DC type
Overvoltage cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22 800
10 to 30 VDC (ripple included)
Ripple ≤3 V
Reverse-polarity protection Yes
Power consumption < 1 W
Power dissipation ≤5.5 W
Inrush current ≤1 A
Rated impulse withstand
voltage 800 V
Dielectric voltage
Supply - Dupline®≥200 VAC (rms)
Supply - Inputs ≥4 kVAC (rms)
Input Specifications
Inputs
8 voltage-type
Input voltage range VBB 6 to 265 VAC/DC
Frequency range on AC 45 to 400 Hz
Input voltage for signal "0" ≤1 VAC/DC
Input voltage for signal "1" ≥6 VAC/DC
Input current for signal "1" Typ. 10 mA (VBB 10-18 VDC)
lower at other input voltages
Input current limiter Yes
Inrush current ≤450 mA
(at VBB = 265 VDC)
Operating time for signal "1" ≤1 pulse train + 3 ms
Operating time for signal "0" ≤1 pulse train + 50 ms
Cable length ≤25 m
Dielectric voltage
Inputs - Dupline®≥4 kVAC (rms)
G 3420 5502 024
Du line®
Fieldbus Installationbus
2Specifications are subject to change without notice (28.09.99)
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
Power ON delay Typ. 2 s
Power OFF delay ≤1 s
Output OFF delay
upon loss of Dupline®carrier ≤20 ms
Indication for
Supply ON LED, green
Input activated LED, red
Dupline®carrier LED, yellow
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature
-20° to +50°C (-4° to +122°F)
Storage temperature
-50° to +85°C (-58° to +185°F)
Humidity (non-condensing) 20 to 80%
Mechanical resistance
Shock 15 G (11 ms)
Vibration 2 G (6 to 55 Hz)
Dimensions
Material
(see "Technical Information") H4-housing
Weight 250 g
G 3420 5502
General Specifications Mode of Operation
8-channel transmitter with 8
voltage inputs (6 to 265
VAC/DC).
Each input may be coded in-
dividually by means of the
code programmer GAP
1605. For details, please
refer to the respective data
sheet.
When a voltage (6 to 265
VAC/DC) is applied to termi-
nal 25 (input 1), the transmit-
ter transmits on the channel
coded for input 1.
Whenever the voltage of the
input is < 1 V, the transmitter
stops transmitting on the re-
spective channel.
Notes:
-Terminals 4 and 24 are in-
ternally connected.
-Terminals 4 and 24 are
common (minus).
Input connections
Input 1: terminals 24 & 25
Input 2: terminals 24 & 26
Input 3: terminals 24 & 27
Input 4: terminals 24 & 28
Input 5: terminals 4 & 5
Input 6: terminals 4 & 6
Input 7: terminals 4 & 7
Input 8: terminals 4 & 8
Wiring Diagram
S: signal wire
~
(+) ~
(-)
Power
supply
1 2 3 4 VBB
+˜
-˜
VBB
-˜
+˜
Operation Diagram
Input 1 (term. 25)
Transmission on chan. for input 1
Input 8 (term. 8)
Transmission on channel for input 8
Power supply
Accessories
DIN-rail FMD 411
For further information, see "Accessories".
5 6 7 8
Dimensions (mm)
H4-housing
