Microwave SLCs Multi-Cap Arrays GENERAL INFORMATION AVX Multi-Cap Arrays are available with 2, 3, 4, 5 or 6 capacitors on one single layer capacitor substrate. DualCaps are available in NP0, X7R, X7S (Z), Maxi and Maxi+ dielectrics. Multi-Caps are available in dielectrics Z, Maxi and Maxi+. These arrays have advantages over single components in the form of smaller overall size, reduced handling and lower average unit costs. They are, therefore, a good choice for broad-band bypass applications where circuit board layouts can utilize these configurations. The designs, shown along with the range of maximum capacitance values, represent typical parts. Since most applications require specific form factors, custom designs on all multi-cap arrays are available to meet individual customer requirements and are offered with quick turn around. No charge samples are generally shipped within two weeks of the design sign-off. Both standard and custom designs are available with borders for those applications where conductive epoxy run up exposes the parts to the possibility of shorting. Maximum capacitance per pad for bordered devices will be necessarily somewhat lower than shown on the adjacent page. 2 and 3 cap arrays can be designed with different capacitance values per pad in circuit designs where identical values pad-to-pad are, for one reason or another, not altogether suitable. Additionally, the dual-caps are available to match micro strip widths as dictated by circuit considerations. When mounted with the individual pads down, the need for wire bonding is eliminated. The maximum capacitance values indicated on the typical designs shown represent capacitance per pad. Mounted with both pads down puts two capacitors in series. The effective series capacitance (CEff), can be determined by 1/CEff = 1/C1 + 1/C2. Contact the factory or your local AVX representative. DUAL-CAP MULTI-CAP T G W G W T L L 12 Microwave SLCs Multi-Cap Arrays GHB SERIES: DUAL CAP SINGLE LAYER CAPACITORS DIMENSIONS: inches (millimeters) GHB2 .050.010 (1.27.254) .020+.000,-.003 (.508+.000,-.076) (L) Length (W) Width GHBY GHB3 Cap/Pad Min 0.2 18 25 200 270 (pF) Max 1.2 75 220 350 450 GHB5 .080.010 (2.03.254) .025+.000,-.003 (.635+.000,-.076) .030+.000,-.003 .040+.000,-.003 (.762+.000,-.076) (1.02+.000,-.076) .008.002 (.203.051) .005 min/.010 max (.127/.254) (T) Thickness (G) Gap Dielectric A C Z Maxi Maxi+ GHB4 Cap/Pad Min 0.4 39 54 430 600 (pF) Max 2.6 160 500 780 1000 Cap/Pad Min 0.5 47 65 520 730 (pF) Max 3.1 200 600 940 1200 Cap/Pad Min 0.7 63 88 700 980 .050+.000,-.003 (1.27+.000,-.076) (pF) Max 4.2 260 770 1200 1500 Cap/Pad Min 0.9 78 100 870 1200 (pF) Max 5.7 330 960 1500 1900 GH-SERIES: MULTI-CAP ARRAY SINGLE LAYER CAPACITORS DIMENSIONS: inches (millimeters) GH*2 Length - Code Length - Code Length - Code Length - Code (W) Width GH*Y GH*3 .065.010 (1.65.254) .090.010 (2.29.254) .115.010 (2.92.254) .140.010 (3.56.254) .025.005 .030.005 (.635.127) (.762.127) .008.002 (.203.051) .025x.015 .030x.015 (.635x.381) (.762x.381) .005 min/.010 max (.127/.254) (C) - 3 Caps (D) - 4 Caps (E) - 5 Caps (F) - 6 Caps .020.005 (.508.127) (T) Thickness Pad Size (nominal) .020x.015 (.508x.381) (G) Gap (All Arrays) Dielectric Z Maxi Maxi+ Cap/Pad Min 20 140 200 (pF) Max 120 200 300 Cap/Pad Min 25 170 250 (pF) Max 150 250 370 Cap/Pad Min 30 210 300 GH*6 .040.005 (1.02.127) .040x.015 (1.02x.381) (pF) Max 180 300 450 Cap/Pad Min 40 280 400 (pF) Max 250 400 600 HOW TO ORDER GH B 5 5 8 102 P Type Code Array Code B=2 C=3 D=4 E=5 F=6 Size Code 2 = .020" W Y = .025" W 3 = .030" W 4 = .040" W 5 = .050" W S = Special Working Voltage Code 5 = 50VDC Dielectric Code A = NP0 C = X7R Z = X7S 8 = Maxi 9 = Maxi+ Cap Code EIA Cap Code in pF Cap Tolerance P = +100% -0% Z = +80% -20% Dual-Caps M = 20% available A 6N Termination Packaging Code Code A = Au 6N = Antistatic (100 -in min) Waffle Pack over Ti/W (1000 A nom) also available N = Ti/W-Ni-Au 13