Discontinued FOR BOARD-TO-CABLE CONNECTION 230R SERIES (CONFORMS TO SCSI) FEATURES * 1.27 mm x 2.54 mm (0.050 in. x 0.100 in.) pitch contact arrangement enables high-density mounting. * Cables and connectors are assembled by means of discrete wire IDC. * Terminals are spaced in a four-row staggered arrangement (2.54 mm x 1.905 mm) (0.100 in. x 0.075 in.). * Knife-fork two-point contacts are highly reliable. * One-touch lock types and screw lock types are available for fixing the board-side connector and the cable-side connector. * The following connectors conform to the SCSI standards recommended by ANSI: (1) Single-operation lock types * 50-contact type:Conforms to the A-cable connectors prescribed in SCSI-II and SCSI-III * 68-contact type:Conforms to the B-cable connectors prescribed in SCSI-II (2) Screw lock types * 68-contact type:Conforms to the P/Q-cable connectors prescribed in SCSI-III * SCSI: Small Computer System Interface MATERIALS SPECIFICATIONS Materials Insulator Polyester (UL94V-0) Conductor Copper alloy Plating Item Contact Gold plating Terminal Palladium plating Specifications Operating temperature range -55C to +105C Current rating DC 1 A Voltage rating AC 240 V Contact resistance 30 m max. (DC 6 V, 0.1A) Insulation resistance 1000 M min. (DC 500 V) Dielectric withstand voltage AC 750 V for 1 minute Applicable wire (standard) AWG #28 and #30 twisted-pair cables with 0.5 to 0.88 mm (0.020 to 0.035 in.) sheath diameter. (The applicable wires depend on the number of contacts. See the descriptions of IDC plugs and metal covers.) Specifications subject to change Item Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 230R Series (Conforms to SCSI) STRAIGHT SOCKET (SINGLE-OPERATION LOCK TYPE) DIMENSIONS End terminal 5.50 (0.216) A 10.5 (0.413) B No. 1 2-No. 2-56UNC D No. 2 5 (0.196) 5.1 (0.200) No. 3 3.8 (0.149) 3.4 (0.133) E 1.27 (0.050) C Unit: mm (in.) MOUNTING HOLE LAYOUT (COMPONENT SIDE) 26 and 50 contacts 20, 28 and 68 contacts C 0.1 (0.004) 1.27 0.1 (0.050 0.004) 0 ( .8 0 .0 31 .06 No. 1 0. 00 ) ) Unit: mm (in.) RECOMMENDED PANEL DIMENSIONS R (R 1.5 0. 0.1 8.3 0.1 05 9 0 (0.326 0.004) .0 04 ) PATTERN INHIBITED AREAS 2 ) 2 .8 10 2 0.1 ( 00 1.27 0.1 (0.050 0.004) ) 0. C 0.1 (0.004) .8 10 2 0.1 ( 0 ( .8 0 .0 31 .06 No. 1 1.905 0.1 (0.075 0.004) B 0.1 (0.004) 1.905 0.1 (0.075 0.004) B 0.1 (0.004) 11.1 -0 (0.437 -0) (E + 0.5) 0.1 ((E + 0.019) 0.004) 3.30 -0 (0.129 -0) 2.85 -0 (0.112 -0) B 0.1 (0.004) Unit: mm (in.) Thickness of recommended panel: t = 1 (0.04) Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 20 26 28 40 50 68 Part number FCN-234D020-G/E FCN-234D026-G/E FCN-234D028-G/E FCN-234D040-G/E FCN-234D050-G/E FCN-234D068-G/E A 33.40 (1.314) 37.21 (1.464) 38.48 (1.514) 46.10 (1.841) 52.45 (2.064) 63.88 (2.514) B 27.43 (1.079) 32.24 (1.269) 32.51 (1.279) 40.13 (1.479) 46.48 (1.829) 57.91 (2.279) Dimensions: mm (in.) C 11.46 (0.451) 15.24 (0.600) 16.51 (0.650) 24.13 (0.950) 30.48 (1.200) 41.91 (1.650) D 15.60 (0.614) 19.41 (0.764) 20.68 (0.814) 28.30 (1.114) 34.65 (1.364) 46.08 (1.814) E 23.24 (0.914) 27.05 (1.064) 28.32 (1.114) 35.94 (1.414) 42.29 (1.664) 53.72 (2.114) This series includes connectors with M 2.5 threaded inserts for mounting on PC boards and panels. Specify a part number by replacing -G/E at the end with -G/C. Example: FCN-234D050-G/C Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 FCN-234D068-G/P*** 68 CONTACT STRAIGHT TYPE, BOARD-SOCKET, SCREW TYPE LOCK DIMENSIONS 8.74 (0.344) 4.75 (0.187 ) 1.45 (0.057) 5.5 (0.216) 63.88 (2.514) 57.91 (2.279) 41.91 (1.633) 1.27 (0.050) Z 3.8 (0.149) 5.5 (0.216 ) 4 ( 0.157 ) 1.905 0.3 (0.075 0.011) 1.27 (0.050) 41.91 (1.650) 2 1.47 (0.057 ) 6.0 (0.236 ) 3.4 (0.133) 5 (0.196) 46.08 (1.814) 2-No.2-56UNC 5.51 (0.216 ) Z No. 4-40UNC Jack Socket FCN-230A24 SECTION Z-Z (5/1) 1.905 (0.075) PART NO.: FCN-234D068-G/P#DO Unit: mm (in.) MOUNTING HOLE LAYOUT PANEL LAYOUT PANEL/THICKNESS: t = 1.5mm 1.905 0.1 (0.075 0.004) 1st Contact 2.4 (0.094 ) 3.99 (0.157 ) No. 2-56UNC 41.91 0.1 (1.633 0.004) 57.91 0.1 (2.279 0.004) 1.27 0.05(.050 0.001) 7.5 0.1 (0.086 0.004) 54.21 0.1 (2.124 0.004) R2.2 0.1 (R0.086 0.004) 0 ( .8 0 .0 31 .06 Position of pin1 0. Unit: mm (in.) 00 Unit: mm (in.) 2 ) DIMENSIONS 63.88 (2.514) 57.91 (2.279) 41.91 (1.633) 1.27 (0.050) Z 5.5(0.216) 63.88 (2.514) 5.5(0.216) PART NO.: FCN-234D068-G/P#DO 1.905 (0.075) Unit: mm (in.) Z 46.08 (1.814) 1.27 (0.050) 41.91 (1.650) PART NO.: FCN-234D068-G/P 5 (0.196) 1st Contact 2-No.4-4OUNC 3.8 (0.149) 1.27 (0.050) 41.91 (1.650) 3.4 (0.133) 46.08 (1.814) 8.74 (0.344) 2-No.2-56UNC 5.51 (0.216 ) Z 3.8 (0.149) 1st Contact 5 (0.196) 8.74 (0.344) 3.4 (0.133) 57.91 (2.279) 41.91 (1.633) 1.27 (0.050) Z 1.905 (0.075) Unit: mm (in.) PANEL LAYOUT PANEL/THICKNESS: t = 1.5mm PANEL/THICKNESS: t = 1.5mm 57.91 0.1 (2.279 0.004) 57.91 0.1 (2.279 0.004) 54.21 0.1 (2.134 0.004) R2.2 0.1 (R0.086 0.004) 7.5 0.1 (0.295 0.004) 7.5 0.1 (0.295 0.004) 54.21 0.1 (2.134 0.004) R2.2 0.1 (R0.086 0.004) Unit: mm (in.) 2-3 230R Series (Conforms to SCSI) RIGHT ANGLE SOCKET (SINGLE-OPERATION LOCK TYPE) DIMENSIONS A B 5.5 (0.216) End terminal C 0.40 (0.015) 4.70 (0.185) 4.37 (0.173) 3.4 (0.133) B 0.40 (0.015) 12.30 (0.484) 5 (0.196) E 1.905 (0.075) 2-No. 2-56UNC D 5.10 (0.200) No. 1 No. 2 No. 3 0.7 (0.027) 6.605 (0.602) 10.5 (0.413) 1.27 (0.050) Unit: mm (in.) 2-No. 2-56UNC MOUNTING HOLE LAYOUT (COMPONENT SIDE) 20, 28, 40, and 68 contacts End terminal ) Unit: mm (in.) RECOMMENDED PANEL DIMENSIONS .0 04 ) 3.2 -0 (0.125 -0) 3.5 mm (0.138 in.) max. (E + 0.5) 0.1 ((E + 0.019) 0.004) 1.905 0.1 (.075 0.004) 6 -0 (0.023 -0) .8 0 2 0.11 ( 02 ) 0.0 Unit: mm (in.) .06 No. 1 02 ) 6.8 -0 (0.267 -0) 0 ) 0.0 3.2 -0 (0.125 -0) 0.1 (0.004) .8 0 .031 ( No. 3 No. 2 PATTERN INHIBITED AREAS B 1.27 0.1(0.050 0.004) .8 0 2 .11 (f0 .06 0 No. 1 .8 0 .031 ( No. 3 No. 2 C 0.1 (0.004) R (R 1.5 0. 0.1 0.1 8.3 05 9 0 (0.326 0.004) 1.27 0.1(0.050 0.004) End terminal B 0.1 (0.004) 1.905 0.1 (0.075 0.004) C 0.1 (0.004) 3.5 mm (0.138 in.) max. 3.5 mm (0.138 in.) max. B 0.1 (0.004) 1.905 0.1 (0.075 0.004) 26 and 50 contacts B 0.1 (0.004) Thickness of recommended panel: t = 1 mm (0.039 in.) Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 20 26 28 40 50 68 Part number FCN-235D020-G/E FCN-235D026-G/E FCN-235D028-G/E FCN-235D040-G/E FCN-235D050-G/E FCN-235D068-G/E A 33.40 (1.314) 37.21 (1.464) 38.48 (1.514) 46.10 (1.841) 52.45 (2.064) 63.88 (2.514) B 27.43 (1.079) 32.24 (1.269) 32.51 (1.279) 40.13 (1.479) 46.48 (1.829) 57.91 (2.279) Dimensions: mm (in.) C 11.46 (0.451) 15.24 (0.600) 16.51 (0.650) 24.13 (0.950) 30.48 (1.200) 41.91 (1.650) D 15.60 (0.614) 19.41 (0.764) 20.68 (0.814) 28.30 (1.114) 34.65 (1.364) 46.08 (1.814) E 23.24 (0.914) 27.05 (1.064) 28.32 (1.114) 35.94 (1.414) 42.29 (1.664) 53.72 (2.114) This series includes connectors with M 2.5 threaded inserts for mounting on PC boards and panels. Specify a part number by replacing -G/E at the end with -G/C. Example: FCN-235D050-G/C Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4 230R Series (Conforms to SCSI) RIGHT-ANGLE SOCKET WITH BOARD LOCK BRACKET (SINGLE-OPERATION LOCK TYPE) DIMENSIONS A End terminal 2-No. 2-56UNG D 5 (0.196) 0.70 (0.027) E 4.37 (0.173) 3.00(0.118) 3.4 (0.133) B Thickness of board: t = 1.6 mm (0.063 in.) 0.40 (0.015) 12.30 (0.484) 6.605 (0.260) No. 3 5.10 (0.200) No. 2 1.905 (0.075) No. 1 0.40 (0.015) 4.70 (0.185) 1.27 (0.050 ) 10.50 (0.413) 5.5 (0.216) B C 2-No. 2-56UNG Unit: mm (in.) MOUNTING HOLE LAYOUT (COMPONENT SIDE) 20, 28,40, and 68 contacts End terminal Unit: mm (in.) RECOMMENDED PANEL DIMENSIONS 04 ) 3.2 -0 (0.125 -0) 3.5 mm (0.138 in.) max. (E + 0.5) 0.1 ((E + 0.019) 0.004) 1.905 0.1 (.075 0.004) 6 -0 (0.023 -0) Unit: mm (in.) 02 ) 6.8 -0 (0.267 -0) 3.2 -0 (0.125 -0) 0.0 0.1 (0.004) .06 02 ) No. 1 PATTERN INHIBITED AREAS B 0 No. 2 .05 0 ) 3 0.12 ( No. 3 .8 0 .031 ( 0.0 No. 1 1.27 0.05(0.050 0.001) .05 0 ) 3 0.12 ( .06 0 .8 0 .031 ( No. 3 No. 2 C 0.1 (0.004) R (R 1.5 0. 0.1 05 8.3 0.1 9 0 ( 0.3260.004) .0 1.27 0.05(0.050 0.001) End terminal B 0.1 (0.004) 3.5 (0.13) max. C 0.1 (0.004) 1.905 0.1 (0.075 0.004) 3.5 (0.13) max. B 0.1 (0.004) 1.905 0.1 (0.075 0.004) 26 and 50 contacts B 0.1 ( 0.004) Thickness of recommended panel: t = 1 mm (0.039 in.) Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 20 26 28 40 50 68 Part number FCN-235D020-G/H FCN-235D026-G/H FCN-235D028-G/H FCN-235D040-G/H FCN-235D050-G/H FCN-235D068-G/H A 33.40 (1.314) 37.21 (1.464) 38.48 (1.514) 46.10 (1.841) 52.45 (2.064) 63.88 (2.514) B 27.43 (1.079) 32.24 (1.269) 32.51 (1.279) 40.13 (1.479) 46.48 (1.829) 57.91 (2.279) Dimensions: mm (in.) C 11.46 (0.451) 15.24 (0.600) 16.51 (0.650) 24.13 (0.950) 30.48 (1.200) 41.91 (1.650) D 15.60 (0.614) 19.41 (0.764) 20.68 (0.814) 28.30 (1.114) 34.65 (1.364) 46.08 (1.814) E 23.24 (0.914) 27.05 (1.064) 28.32 (1.114) 35.94 (1.414) 42.29 (1.664) 53.72 (2.114) This series includes connectors with M2.5 threaded inserts for mounting panels. Specify a part number by replacing -G/H at the end with -G/J. Example: FCN-235D050-G/J Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 5 230R Series (Conforms to SCSI) FCN-235D-G/** RIGHT ANGLE, BOARD-SOCKET, METAL SHELL, BOARDLOCKS (40 PinMII/100 base T std) (68 Pin SCSI III std) DIMENSIONS 0.4 (0.015 ) 10.5 (0.413 ) 1.27 (0.050) 5.51 (0.216 ) 5.5 (0.216 ) B C 1.75 (0.068 ) 1 (0.039 ) 4.75 (0.187 ) 2-No.4-40UNC B A 5.5 (0.216 ) 1.47 (0.057 ) 6.0 (0.236 ) 12.3 (0.484 ) D 1.905 (0.075 ) 1st Contact 2.4 (0.094 ) 3.99 (0.157 ) 0.7 5 (0.196 ) (0.039) 6.605 (0.260 ) No. 2-56UNC 4 ( 0.157 ) No. 4-40UNC Jack Socket FCN-230A24 F 3.4 (0.133 ) Unit: mm (in.) PANEL LAYOUT 1.27 0.1(.050 0.004) .1 0 1st CON POSITION 40 40 40 40 68 68 68 68 (.075 0.004) 1.905 0.1 6 -0 (0.023 -0) 1st CONTACT POSITION 02 ) No. of Contacts 6.8 -0 (0.267 -0) 0.0 3.2 -0 (0.125 -0) .06 0 .8 0 .031 ( 3.2 -0 (0.125 -0) 3.5 mm (0.138 in.) max. R2.2 0.1 (R0.086 0.004) A 0.1 (0.004) C 0.1 (0.004) .05 .004 ) 3 00 12 (. 7.5 0.1 (0.295 0.004) 80.05 (.314 0.001) 1.905 0.1 (.075 0.004) B 0.1 (0.004) E 0.1 (0.004) 3.5 (0.13) max. B PCB LAYOUT 0.1 (0.004) Unit: mm (in.) Unit: mm (in.) F Jack Sockets 2.54 INSTALLED 46.10(1.815) 40.13(1.830) 24.13(0.950) 28.30(1.114) 36.43(1.434) 3.40 INSTALLED FCN-235D040-G/HBSR-N 46.10(1.815) 40.13(1.830) 24.13(0.950) 28.30(1.114) 36.43(1.434) 2.54 -- 46.10(1.815) 40.13(1.830) 24.13(0.950) 28.30(1.114) 36.43(1.434) 3.40 -- FCN-235D068-G/HASR-N 63.88(2.515) 57.91(2.280) 41.91(1.650) 46.08(1.814) 54.21(2.134) 2.54 INSTALLED 63.88(2.515) 57.91(2.280) 41.91(1.650) 46.08(1.814) 54.21(2.134) 3.40 INSTALLED FCN-235D068-G/HBSR-N 63.88(2.515) 57.91(2.280) 41.91(1.650) 46.08(1.814) 54.21(2.134) 2.54 -- 3.40 -- PART NUMBER A B C D E FCN-235D040-G/HASR-N 46.10(1.815) 40.13(1.830) 24.13(0.950) 28.30(1.114) 36.43(1.434) FCN-235D040-G/HAR-N FCN-235D040-G/HBR-N FCN-235D068-G/HAR-N FCN-235D068-G/HBR-N Specifications subject to change 63.88(2.515) 57.91(2.280) 41.91(1.650) 46.08(1.814) 54.21(2.134) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6 230R Series (Conforms to SCSI) RIGHT-ANGLE SOCKET (SCREW LOCK TYPE) DIMENSIONS 63.88 (2.514) 57.91 (2.279) 41.91 (1.633) 1.27(0.050) 5.5 (0.216) 10.50 (0.413) 0.40 (0.015) 46.08 (1.814) 2-No. 2-56UNC 2-No. 2-56UNC 1.905 (0.075) 4.70 (0.185) 0.40 (0.015) 12.30 (0.484) 4.37 (0.173) 3.4 (0.133) Thickness of board : t = 1.6 mm (0.063 in.) 3.2 -0 (0.125 -0) 6.8 -0 (0.267 -0) Unit: mm (in.) RECOMMENDED PANEL DIMENSIONS 3.5 mm (0.138 in.) max. 1.905 0.1 (.075 0.004) 0.8 0.06 (.031 0.002) ) 3.0 2- 0.118 (2- Position of pin 2 Position of pin 1 57.91 0.1 (2.279 0.004 ) 3.2 -0 (0.125 -0) 57.91 0.1 (2.279 0.004) 41.73 0.1 (1.642 0.004) 1.27 0.1 (0.050 0.004) PATTERN INHIBITED AREAS 1.905 0.1 (0.075 0.004) 3.5 mm (0.138 in.) max. MOUNTING HOLE LAYOUT (COMPONENT SIDE) Unit: mm (in.) 6 -0 (0.023 -0) 6.605 (0.260) 0.70 (0.027) 5 (0.196) 5.51 (0.216) No. 1 Unit: mm (in.) PART NUMBER FCN-235D068-G/EA 7.5 0.1 (0.2950.004) 54.21 0.1 (2.1340.004) NUMBER OF CONTACTS 68 contacts 57.91 0.1 (2.2790.004) R 2.2 0.1 (R 0.0860.004) Thickness of recommended panel: t = 1.5 mm (0.059 in.) Note: Remove the spacer to mount the connector on the panel, then tighten the hexagon nuts. Make sure that the panel is sandwiched between the connector and nuts. Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 7 230R Series (Conforms to SCSI) STRAIGHT SOCKET (SINGLE-OPERATION LOCK TYPE) DIMENSIONS 5.5(0.216) B C 0.4 (0.015) 10.5 (0.413) 1.27 (0.050) 2-No. 4-40UNC B A 5 (0.196) 12.3 (0.484) F 0.7 (0.027) 6.605 (0.260) 12.3 (0.484) 0.7 (0.027) D 1.905 (0.075) 5 (0.196) 1st Contact 3.4 (0.133) 2-No. 2-56UNC 2-No.2-56UNC 4.75 (0.187 ) Unit: mm (in.) 5.5 (0.216 ) 1.47 (0.057 ) 6.0 (0.236 ) 2.4 (0.094 ) 3.99 (0.157 ) No. 2-56UNC 4 ( 0.157 ) No. 4-40UNC Jack Socket FCN-230A24 Unit: mm (in.) MOUNTING HOLE LAYOUT (COMPONENT SIDE) PCB LAYOUT PANEL LAYOUT A 0.1 (0.004) PART NUMBER 68 FCN-235D068-G/HA 68 FCN-235D068-G/HB Specifications subject to change 3.5 (0.13) max. 3.2 -0 (0.125 -0) 3.5 mm (0.138 in.) max. 1.905 0.1 (.075 0.004) 6 -0 (0.023 -0) 1st CONTACT POSITION .06 002 ) 0 0. No. of Contacts .8 0 .031 ( (0.125 -0) 6.8 -0 (0.267 -0) 1.27 0.1(.050 0.004) .1 0 3.2 -0 .05 .004 ) 3 00 12 A 0.1 (0.004) (. R2.2 0.1 (R0.086 0.004) A 0.1 (0.004) B 0.1 (0.004) 1.905 0.1 (.075 0.004) 7.5 0.1 (0.295 0.004) E 0.1 (0.004) Unit: mm (in.) Unit: mm (in.) F Jack Sockets 63.88(2.515) 57.91(2.280) 41.91(1.650) 46.08(1.814) 54.21(2.134) 3.40 Yes 63.88(2.515) 57.91(2.280) 41.91(1.650) 46.08(1.814) 54.21(2.134) 3.40 No A B C Dimensions are in millimeters (inches) D E www.fcai.fujitsu.com 8 230R Series (Conforms to SCSI) FCN-237R**-G/* IDC TYPE, CABLE-PLUG DIMENSIONS 2.54 (0.100) B 1.27(0.50) 6.90(0.272) D 5.70(0.224) C E Main Body 9.00 (0.354) End contact Number 1 contact Assembled Part 13.75 (0.541) C Number 2 contact 4.9(0.193) Number 3 contact 9.00 (0.354) Cover 1 Cover 2 Unit: mm (in.) PART NUMBERS AND DIMENSIONS No. of Contacts 20 26 28 40 50 68 100 External Diameter of Applied Wire 0.8 to 0.88 mm (0.031 to 0.035) 0.5 to 0.65 mm (0.020 to 0.026) 0.66 to 0.79 mm (0.026 to 0.030) 0.8 to 0.88 mm (0.031 to 0.035) 0.5 to 0.65 mm (0.020 to 0.026) 0.8 to 0.88 mm (0.031 to 0.035) 0.5 to 0.65 mm (0.020 to 0.026) 0.8 to 0.88 mm (0.031 to 0.035) 0.66 to 0.79 mm (0.026 to 0.030) 0.8 to 0.88 mm (0.031 to 0.035) 0.5 to 0.65 mm (0.020 to 0.026) 0.66 to 0.79 mm (0.026 to 0.030) 0.8 to 0.88 mm (0.031 to 0.035) 0.5 to 0.65 mm (0.020 to 0.026) 0.66 to 0.79 mm (0.026 to 0.030) 0.8 to 0.88 mm (0.031 to 0.035) 0.5 to 0.65 mm (0.020 to 0.026) Specifications subject to change Dimensions mm (in.) PART NUMBER A B C D E 16.75(0.659) 11.43(0.450) 21.25(0.837) 15.80(0.622) 17.00(0.669) 20.65(0.809) 15.24(0.600) 25.06(0.987) 19.61(0.722) 20.81(0.819) 21.83(0.859) 16.51(0.650) 26.33(1.037) 20.88(0.822) 22.08(0.869) 29.45(1.159) 24.13(0.950) 33.95(1.377) 28.50(1.122) 29.70(1.169) 35.80(1.409) 30.48(1.200) 40.30(1.587) 34.85(1.587) 36.05(1.419) 47.23(1.859) 41.91(1.650) 51.73(2.037) 46.28(1.822) 47.48(1.869) 67.55(2.659) 62.23(2.450) 72.05(2.837) 66.60(2.622) 67.80(2.669) FCN-237R020-G/F FCN-237R020-G/E FCN-237R020-G/G FCN-237R026-G/F FCN-237R026-G/E FCN-237R028-G/F FCN-237R028-G/E FCN-237R040-G/F FCN-237R040-G/G FCN-237R050-G/F FCN-237R050-G/E FCN-237R050-G/G FCN-237R068-G/F FCN-237R068-G/E FCN-237R068-G/G FCN-237R100-G/F FCN-237R100-G/E Dimensions are in millimeters (inches) www.fcai.fujitsu.com 9 230R Series (Conforms to SCSI) METAL COVER (ONE-TOUCH LOCK TYPE) DIMENSIONS [A/E or C/E type] 12.0 (0.472) 10.0 (0.393) 32.5 (1.279) A D B C 7.5 (0.295) [D/E type] 12.0 (0.472) 10.0 (0.393) A D C B A 1 2 3 4 5 32.5 (1.279) E Indent B C D The D/E type has indents to prevent incorrect insertion. Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 20 26 28 40 50 68 Part number FCN-230C020-A/E FCN-230C020-C/E FCN-230C026-C/E FCN-230C028-A/E FCN-230C028-C/E FCN-230C040-C/E FCN-230C050-A/E FCN-230C050-C/E FCN-230C050-D/E FCN-230C068-A/E FCN-230C068-C/E FCN-230C068-D/E Specifications subject to change A Dimensions: mm (in.) B 28.95 (1.139) 21.15 (0.832) 32.76 (1.298) 24.96 (0.982) 34.03 (1.339) 26.23 (1.032) 41.65 (1.639) 33.85 (1.332) 48.00 (1.889) 40.20 (1.582) 59.43 (2.339) 51.63 (2.032) Dimensions are in millimeters (inches) C 6.5 x 4.5 (0.255 x 0.177) 8.5 x 8.2 (0.334 x 0.322) 7.2 x 8.5 (0.283 x 0.334) 6.5 x 6.0 (0.255 x 0.236) 7.2 x 8.5 (0.289 x 0.334) 9.0 x 10.0 (0.354 x 0.393) 8.5 x 7.0 (0.334 x 0.275) 10.0 x 9.7 (0.395 x 0.381) 14.7 x 10.4 (0.585 x 0.409) 9.0 x 8.0 (0.354 x 0.314) 10.0 x 9.0 (0.395 x 0.354) 14.7 x 10.4 (0.585 x 0.409) www.fcai.fujitsu.com 10 230R Series (Conforms to SCSI) BACKSHELL KIT (METAL CAN , PLASTIC SLIDE ON BOOT) SCSI II DIMENSIONS 11.5 (0.453) 9. 8 (0 . 38 6) Part Number: FCN-230C050-E/SC Outer cover 38 (1.496) Cable clamp Pan head machine screw Latch 32 (1.259) 42 (1.654) Tooling Required Crimping Tool Plate FCN-237T-T094/H Arbor Press FCN-707T-T101/H Innner cover (2) 48.7 (1.917) Unit: mm (in.) Innner cover (1) METAL OBTUSE ANGLE CABLE OUT COVER (SINGLE-OPERATION LOCK TYPE) DIMENSIONS D 8.4 C View of A Flat head machine screw Locking lever 12 (0.472) 10 (0.393) Cover (12) Cover (11) B A -11 (-0.433) A 4 E Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 40 50 Part number FCN-230C040-L/E FCN-230C050-L/E Specifications subject to change A 41.65 (1.639) 48.00 (1.889) B 33.80 (1.330) 35.50 (1.397) Dimensions are in millimeters (inches) Dimensions: mm (in.) C 10.60 (0.417) 11.38 (0.448) D 6.34 (0.249) 6.70 (0.263) www.fcai.fujitsu.com E 19 15 11 230R Series (Conforms to SCSI) FCN-237R068-G/ Locking screw 57.91 (2.575) 12 (0.472) 15.62 (0.614) 36 (1.417) 2.7 (0.105) No. 2-56UNC 65.41 (2.575) 3.3 (0.129) EMI/ESD RESISTANT COVER (SCREW LOCK TYPE) SCSI III 68 POSITION DIMENSIONS Inner cover 2 Inner cover 1 Pan head machine screw 38.4 (1.511) 16 (0.629) 46.43 (1.827) Cable clamp 4 1 1) 55 0. ( Outer cover * Applicable cable: External diameter o12.3 mm (o0.484 in.) Unit: mm (in.) PART NUMBERS Part number Applicable Cable FCN-230C068-E/S O12.3 mm (O0.484 in.) FCN-230C068-E/SA O11.5mm (O0.452 in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 12 230R Series (Conforms to SCSI) ACCESSORY (DUST CAP FOR SOCKET) (230R SERIES AND 240R SERIES) Used to prevent dust from entering the contact section of a socket connector. DIMENSIONS A 9.1 (0.362) 15 4 -R -R2 0. 07 8) 3.8 (0.149) 1.3 (0.051) 1 (0.039) (4 7.9 (0.311) B Material : Polypropylene Color : Sand beige Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 28 36 50 68 Part number FCN-230C028-11 FCN-230C036-11 FCN-230C050-11 FCN-230C068-11 Dimensions: mm (in.) A 35.7 (1.405) 40.8 (1.606) 49.7 (1.956) 61.1 (2.405) B 30.1 (1.185) 35.2 (1.385) 44.1 (1.736) 55.5 (2.185) APPLICATIONS FCN-234D0 x x -G/C FCN-244D0 x x -G/E FCN-235D0 x x -G/C FCN-245D0 x x -G/E Dust cap FCN-230C0 x x -11 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 13 230R Series (Conforms to SCSI) CABLE ASSEMBLY TOOLS The following tools are needed to assemble FCN-230/230R/240/240R series connectors. * Cable aligner (semiautomatic cable aligner or hand tool) * IDC tool 1. Cable Aligner Semiautomatic cable aligner Item Hand tool Body/Controller Bed Adaptor FCN-237J FCN-K560-A-xxx FCN-237R FCN-P560-2/A FCN-K560-R-xxx FCN-M561-A/C FCN-247J FCN-247R FCN-237T-T062/H FCN-K560-K-xxx FCN-P560-2/J FCN-K560-J-xxx FCN-247T-T061/H xxx indicates the number of contacts. 2. Insulation Displacement Connection (IDC) tool Item Hand press Head/Table FCN-237J FCN-237T-T064/H FCN-237R FCN-237T-T067/H FCN-237D FCN-247J FCN-237T-T075/H FCN-237T-T109/H FCN-247T-T066/H FCN-247R FCN-247T-T068/H FCN-247D FCN-247T-T077/H * Cable aligner Specifications subject to change * Insulation displacement connection (IDC) tool Dimensions are in millimeters (inches) www.fcai.fujitsu.com 14 230R Series (Conforms to SCSI) Semi-Automatic Tools Cable Aligning Machine Main Body (FCN-M551-120, FCN-M551-220) Wires Clamp lever Cover 2 Cover 1 Applicator Sinking comb Applicator Clamp section Stand Cable key 1. Set the applicator on the stand. Set covers 1 and 2 in the applicator. Head (FCN-H550-1/A Bed 3. Set the applicator onto the installation table and begin cable alignment 2. Push the wire into the sinking combs. Stand (FCN-D550) Lock Handle Lever Stopper Guide Applicator (FCN-A550-1/A-xxx) IDC Tool (FCN-237T-T109/H, FCN-237T-T067/H locator) 4. Take the covers off the applicator. 5. Put covers together and pre-assemble them to the connector body. 6. Conduct final aaembly as shown. FCN-230R SERIES SCSI II CABLE CONNECTORS SOCKET: FCN-237R***-G/E, G/F (***: 020, 026, 028, 050, 068) Pos No. 20 | 68 Applied Wire (wire Dia.: mm) Connector Part number #28 or #30 (0.8 to 0.88) FCN-237R020-G/F | FCN-237R068-G/F #28 or #30 (0.5 to 0.65) FCN-237R020-G/E | FCN-237R068-G/E Cable Aligner IDC Tool Hand Tool Semi-Auto FCN-237T-T062/H | FCN-237t-t043/H (See below*) HAND PRESS: FCN-237T-T109/H HEAD & Locator: FCN-237T-T067/H Semi-automatic-Medium Level Body: :FCN-M551-120 Head Assembly: :FCN-H550 Applicator: :FCN-A550-1/A-***(***: 020, 028, 036, 050, 068, 080) Stand: :FCN-D550 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 15 230R Series (Conforms to SCSI) EMI/ESD RESISTANT COVER DIMENSIONS Number of contacts: 50 contacts Part number: FCN-230C050-E/S No. 2-56UNC 3.30 (0.130) 12.00 (0.472) 15.62 (0.615) 36.00 (1.417) 32.00 (1.260) 2.70 (0.106) Lock screw 46.48 (1.830) Inner cover 2 Inner cover 1 Pan head machine screw (2) 15.00 (0.591) Cable clamp 0. 1 50 Outer cover (2) ) 12 .5 (0 35.00 (1.409) 54.00 (2.126) Unit: mm (in.) Number of contacts: 100 contacts Part number: FCN-230C100-E/S Lock screw No. 2-56UNC 3.73 (0.147) 12.00 (0.472) 78.23 (3.080) 15.62 (0.615) 32.00 (1.260) 36.00 (1.417) 2.70 (0.106) 85.73 (3.375) Pan head machine screw (2) 15.00 (0.591) Inner cover 2 Inner cover 1 Cable clamp 1 3 (0 17.00 (0.699) .5 12 ) Outer cover (2) 42.00 (1.654) 66.75 (2.628) Unit: mm ((in.) This series includes connectors with No.4-40UNC lock screws. Specify a part number by replacing -E/S at the end with -F/S. Example: FCN-230C100-F/S Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 16 230R Series (Conforms to SCSI) RIGHT-ANGLE SOCKET WITH HEXAGONAL NUTS FOR BOARD LOCK DIMENSIONS A B C End terminal 0.40(0.015) 5.50 (0.216) 8.74 (0.344) 1.27 (0.050) D 2-No. 2-56UNC No. 3 4.70 (0.185) 4.37 (0.179) B 2.88 (0.113) Thickness of board: t=1.6 mm (0.063 in.) 0.40 (0.015) 5.51 (0.216) Spacer 6.605 (0.260) 5.0 11.70 (0.460) (0.196) Spacer 1.905 (0.075) No. 2 No. 1 3.40 (0.133) When mounting a connector on a panel, remove the hexagonal nuts and spacers. After mounting on the panel, replace and tighten the hexagonal nuts. Unit: mm (in.) End terminal 6 .0 0 No. 1 Unit: mm (in.) RECOMMENDED PANEL DIMENSIONS (0 .0 55 . 3.3 -0 (0.130-0) 1. 4 0 .1 (B - 3.7) 0.1 (( - 0.146).004) 11.6 -0 (0.457-0) 7.5 0.1 (0.295.004) R B 0.1 ( 0.004) 00 4 ) PATTERN INHIBITED AREAS 00 3. 18) .1 ( 0 0 3. ) 8 .11 No. 3 No. 2 6 .0 0 No. 1 End terminal 2) .00 .8 0 310 .0 (0 ( 0 2) .00 .8 0 310 .0 (0 No. 3 No. 2 C 0.1 (.004) 1.27 0.1 (0.500.004) 1.905 0.1 (0.0750.004) (.004) 3.5 mm (0.138 in.) max. C 0.1 100 contacts B 0.1 (.004) 1.905 0.1 (0.0750.004) 50 contacts B 0.1 (.004) 3.5 mm (0.138 in.) max. MOUNTING HOLE LAYOUT (COMPONENT SIDE) 2.7 -0 (0.106-0) 6.0 -0 (0.236-0) B 0.1 (.004) Unit: mm (in.) Thickness of recommended panel: t = 1.5 mm (0.059 in.) Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 50 100 Part number FCN-235D050-G/P#BA FCN-235D100-G/P#BA A 52.45 (2.065) 84.20 (3.315) Dimensions: mm (in.) B C 46.48 (1.830) 30.48 (1.200) 78.23 (3.080) 62.23 (2.450) D 34.65 (1.364) 66.40 (2.614) This series includes connectors with No.4-40UNC screws for hexagonal nuts. Specify a part number by replacing #BA at the end with #AA. Example: FCN-235D100-G/P#AA Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 17 230R Series (Conforms to SCSI) RIGHT-ANGLE SOCKET WITH HEXAGONAL NUTS FOR BOARD LOCK DIMENSIONS A B C End terminal 0.40(0.015) 5.50 (0.216) 8.74 (0.344) 1.27 (0.050) D 2-No. 2-56UNC No. 3 4.70 (0.185) 4.37 (0.179) B 2.88 (0.113) Thickness of board: t=1.6 mm (0.063 in.) 0.40 (0.015) 5.51 (0.216) Spacer 6.605 (0.260) 5.0 11.70 (0.460) (0.196) Spacer 1.905 (0.075) No. 2 No. 1 3.40 (0.133) When mounting a connector on a panel, remove the hexagonal nuts and spacers. After mounting on the panel, replace and tighten the hexagonal nuts. Unit: mm (in.) End terminal 6 .0 0 No. 1 Unit: mm (in.) RECOMMENDED PANEL DIMENSIONS (0 .0 55 . 3.3 -0 (0.130-0) 1. 4 0 .1 (B - 3.7) 0.1 (( - 0.146).004) 11.6 -0 (0.457-0) 7.5 0.1 (0.295.004) R B 0.1 ( 0.004) 00 4 ) PATTERN INHIBITED AREAS 00 3. 18) .1 ( 0 0 3. ) 8 .11 No. 3 No. 2 6 .0 0 No. 1 End terminal 2) .00 .8 0 310 .0 (0 ( 0 2) .00 .8 0 310 .0 (0 No. 3 No. 2 C 0.1 (.004) 1.27 0.1 (0.500.004) 1.905 0.1 (0.0750.004) (.004) 3.5 mm (0.138 in.) max. C 0.1 100 contacts B 0.1 (.004) 1.905 0.1 (0.0750.004) 50 contacts B 0.1 (.004) 3.5 mm (0.138 in.) max. MOUNTING HOLE LAYOUT (COMPONENT SIDE) 2.7 -0 (0.106-0) 6.0 -0 (0.236-0) B 0.1 (.004) Unit: mm (in.) Thickness of recommended panel: t = 1.5 mm (0.059 in.) Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 50 100 Part number FCN-235D050-G/P#BA FCN-235D100-G/P#BA A 52.45 (2.065) 84.20 (3.315) Dimensions: mm (in.) B C 46.48 (1.830) 30.48 (1.200) 78.23 (3.080) 62.23 (2.450) D 34.65 (1.364) 66.40 (2.614) This series includes connectors with No.4-40UNC screws for hexagonal nuts. Specify a part number by replacing #BA at the end with #AA. Example: FCN-235D100-G/P#AA Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 18 230R Series (Conforms to SCSI) EMI/ESD RESISTANT COVER DIMENSIONS Number of contacts: 50 contacts Part number: FCN-230C050-E/S No. 2-56UNC 2.70 (0.106) Lock screw 3.30 (0.130) 12.00 (0.472) 15.62 (0.615) 36.00 (1.417) 32.00 (1.260) 46.48 (1.830) Inner cover 2 Inner cover 1 Pan head machine screw (2) 15.00 (0.591) Cable clamp 0. 1 50 Outer cover (2) ) 12 .5 (0 35.00 (1.409) 54.00 (2.126) Unit: mm (in.) Number of contacts: 100 contacts Part number: FCN-230C100-E/S Lock screw No. 2-56UNC 3.73 (0.147) 12.00 (0.472) 78.23 (3.080) 15.62 (0.615) 32.00 (1.260) 36.00 (1.417) 2.70 (0.106) 85.73 (3.375) Pan head machine screw (2) 15.00 (0.591) Inner cover 2 Inner cover 1 Cable clamp 1 3 (0 .5 12 ) 17.00 (0.699) Outer cover (2) 42.00 (1.654) 66.75 (2.628) Unit: mm ((in.) This series includes connectors with No.4-40UNC lock screws. Specify a part number by replacing -E/S at the end with -F/S. Example: FCN-230C100-F/S Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 19 230R Series (Conforms to SCSI) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141-0022, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 20