KSD-D6C022-000 1
SDZ5V6D
Zener Diode
5.6V SMALL SIGNAL ZENER DIODE
Features PIN Connection
y Silicon Planar Zener Diodes
y Low Zener impedance and low leakage current
y Compact surface mounted device
Applications
y Constant voltage control
Ordering Information
Device Marking Code 1) Package Packaging
SDZ5V6D Z3 □
① ② SOD-323 Tape & Reel
* 1) Marking code classifications: ① Device code, ② Year & Week code
Absolute Maximum Ratings (Rating at 25℃ ambient temperature unless otherwise specified.)
Characteristic Symbol Value Unit
Power dissipation 2) P
D 200 mW
Maximum operating junction temperature TJ 150
℃
Storage temperature range Tstg -55℃ to +150℃ ℃
Operating junction temperat ure range Topr -55℃ to +150℃ ℃
* 2) Device mounted on FR-4 board with recommended pad layout.
Electrical Characteristics (Rating at 25℃ ambient temperature unless otherwise specified.)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Zener voltage VZ IZ = 5mA 5.35 5.6 5.85 V
Reverse leakage current IR VR = 3V - - 2 uA
Dynamic impedance ZZT IZ = 5mA - - 25 Ω
KNEE dynamic impedance ZZK IZ = 0.25mA - - 1800 Ω
S
Se
em
mi
ic
co
on
nd
du
uc
ct
to
or
r
SOD-323
1. Anode
2. Cathode
KSD-D6C022-000 2
Rating and Characteristic Curves
Fig. 1) Power dissipation vs. Ambient temperature Fig. 2) Z-Voltage vs. Z-Current Characteristics
SDZ5V6D
KSD-D6C022-000 3
Package Outline Dimension
Recommend PCB Solder Land Dimension (Unit : mm)
SDZ5V6D
KSD-D6C022-000 4
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
SDZ5V6D
