US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
LPS3015
Document 436-1
Document 436-1 Revised 11/22/11
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS3015-102ML_ 1.0 0.075 190 1.8 2.0 2.1 1.4 2.0
LPS3015-152ML_ 1.5 0.100 140 1.8 2.1 2.2 1.3 1.7
LPS3015-182ML_ 1.8 0.100 135 1.5 1.7 2.1 1.1 1.4
LPS3015-222ML_ 2.2 0.110 110 2.0 2.0 2.1 1.1 1.4
LPS3015-332ML_ 3.3 0.130 90 1.4 1.5 1.5 1.0 1.4
LPS3015-472ML_ 4.7 0.200 79 1.1 1.2 1.2 0.90 1.2
LPS3015-682ML_ 6.8 0.300 58 0.83 0.86 0.89 0.68 0.90
LPS3015-103ML_ 10 0.440 48 0.60 0.69 0.73 0.55 0.75
LPS3015-153ML_ 15 0.700 35 0.58 0.61 0.62 0.44 0.59
LPS3015-183ML_ 18 0.750 33 0.56 0.58 0.59 0.43 0.58
LPS3015-223ML_ 22 0.825 30 0.48 0.49 0.50 0.42 0.57
LPS3015-333ML_ 33 1.30 23 0.39 0.41 0.42 0.35 0.48
LPS3015-473ML_ 47 1.55 17 0.36 0.38 0.39 0.30 0.40
LPS3015-683ML_ 68 2.35 14 0.29 0.30 0.31 0.25 0.33
LPS3015-104ML_ 100 3.40 11 0.24 0.25 0.26 0.19 0.26
LPS3015-124ML_ 120 4.65 9.0 0.21 0.22 0.22 0.17 0.23
LPS3015-154ML_ 150 6.25 8.0 0.19 0.20 0.20 0.15 0.20
LPS3015-184ML_ 180 8.60 7.5 0.16 0.17 0.17 0.13 0.175
LPS3015-224ML_ 220 9.50 6.0 0.15 0.16 0.16 0.11 0.155
LPS3015-334ML_ 330 23.0 5.0 0.10 0.11 0.11 0.070 0.095
1. Please specify termination and packaging codes:
LPS3015-333MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order: T = RoHS tin-silver-
copper (95.5/4/0.5) or S = non-RoHS
tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 40 – 45 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
• Very low DCR; excellent current handling
• Miniature 3.0 × 3.0 mm footprint; less than 1.5 mm tall
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit http://order.coilcraft.com.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded SMT Power Inductors
–
LPS3015 Series
Document 436-2
Document 436-2 Revised 11/22/11
-40 -20 020406080100 140120
Ambient temperature (°C)
Percent of rated current
120
110
100
90
80
70
60
50
40
30
20
10
0
Isat
Irms
25°C
Typical L vs Current
0.01 0.1
11
0
0.1
1
10
100
Inductance (µH)
0.01 0.1
11
0
Current (A)
4.7 µH
22 µH
33 µH
10 µH
3.3 µH
2.2 µH
1.0 µH
Typical L vs Frequency
0.01 0.1
11
0
0.1
1
10
100
Inductance (µH)
0.01 0.1
11
0
Frequency (MHz)
4.7 µH
22 µH
33 µH
10 µH
3.3 µH
2.2 µH
1.0 µH
0.116 ±0.003
2,95 ±0,076
0.116 ±0.003
2,95 ±0,076
0.130
3,30
0.040
1,02
0.025
0,64
0.045
1,14
0.020
0,51
0.130
3,30
Recommended
Land Pattern
0.035
0,89
Winding
direction
0.055 ±0.004
1,4 ±0,1
*
*
Dimensions are of the case not
including the termination. Formaximum
overall dimensions including the
termination, add 0.005 in/0,13 mm.
*
Dash
number Internal
code
123X
**
Foroptional tin-lead and tin-silver-copper
terminations,dimensions are forthe
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
**
Current Derating
Dimensions are in inches
mm
