Model 8101 Accelerometer Piezoelectric Linear Accelerometer 40g & 160g Dynamic Ranges Wide Bandwidth to 6000Hz Great Value, Low Cost The Model 8101 is a low cost, plug & play accelerometer designed for general purpose vibration measurements. The accelerometer is available in 40g or 160g range and provides a flat frequency response up to >6kHz. Featuring stable piezo-ceramic crystals in shear mode, the accelerometer incorporates full power and signal conditioning and is offered in two measurement direction options (X or Z axis). dimensions FEATURES Two Measurement Directions 7 to 36Vdc Excitation Voltage Potted Construction Piezo-Ceramic Shear Design -40 to +85C Operating Range Integral Cable for Plug & Play APPLICATIONS Asset Monitoring Data Loggers Impact Monitoring Machine Health Monitoring System Wake-Up Switch Product R&D Model 8101 Rev B 32 Journey Ste. 150 Aliso Viejo, CA 92656 Direction of measurement must be specified at time of order. See Ordering Info on page 3. www.meas-spec.com 949-716-5377 11/20/2013 t&m@meas-spec.com Model 8101 Accelerometer performance specifications All values are typical at +24C, 100Hz and 7Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1003 for Plug & Play AC Accelerometers. Parameters DYNAMIC Range (g) Sensitivity (mV/g) Frequency Response (Hz) Resonant Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Shock Limit (g) Residual Noise (g RMS) Spectral Noise, 10Hz (gHz) Spectral Noise, 100Hz (gHz) Spectral Noise, 1kHz (gHz) 40 50.0 2-6000 >30000 2 <8 2000 0.008 160 40 16 ELECTRICAL Bias Voltage (Vdc) Full Scale Output Voltage (V) Total Supply Current (A) Excitation Voltage (Vdc) Output Impedance () Insulation Resistance (M) Shielding Ground Isolation Warm-up Time (msec) 2.5 2 800 7 to 36 <100 >100 100% Isolated from Mounting Surface 30 ENVIRONMENTAL Temperature Response (%) Operating Temperature (C) Storage Temperature (C) Humidity (Active Element & Electronics) Humidity (Case) -20/+20 from -40C to +85C -40 to +85 -40 to +85 Hermetically Sealed Epoxy Sealed, IP65 PHYSICAL Case Material Cable Weight (grams) Mounting Anodized Aluminum 4x #32 AWG Conductors PFA Insulated, Braided Shield, PU Jacket 3.6 Epoxy or Double-sided tape Notes 160 12.5 2-6000 >30000 2 <8 2000 0.008 160 40 16 30% 1dB 2Hz to 10kHz @100Vdc Cable not included Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 100Hz Optional accessories: CS-FREQ-0100 NIST Traceable Amplitude Calibration from 20Hz to 1dB Frequency Response Limit The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. Model 8101 Rev B 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 11/20/2013 t&m@meas-spec.com Model 8101 Accelerometer performance specifications ordering info PART NUMBERING Model Number+Measurement Direction+Range+Cable Length 8101-GGGGX-ZZZ l l l______ Cable (120 is 120inches) l l_________ Measurement Direction (X is X-axis, Z is Z-axis) l____________ Range (0040 is 40g) Example: 8101-0040X-120 Model 8101, X-axis Measurement, 40g, 120inches (10ft) Cable Model 8101 Rev B 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 11/20/2013 t&m@meas-spec.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 8101-0040X-120 8101-0160X-120