Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 1695A Coax - Low Loss Serial Digital Coax For more Information please call 1-800-Belden1 General Description: RG-6/U type, 18 AWG solid .040" bare copper conductor, plenum, foam FEP insulation, Duofoil(R) + tinned copper braid shield (95% coverage), Flamarrest(R) jacket. Physical Characteristics (Overall) Conductor AWG: # Coax AWG Stranding Conductor Material Dia. (mm) 1 18 Solid BC - Bare Copper 1.016 Total Number of Conductors: 1 Insulation Insulation Material: Insulation Trade Name Insulation Material Teflon(R) Dia. (mm) FFEP - Foam Fluorinated Ethylene Propylene 4.318 Outer Shield Outer Shield Material: Layer # Outer Shield Trade Name Type Outer Shield Material 1 Duofoil(R) Coverage (%) Tape Aluminum Foil-Polyester Tape-Aluminum Foil 100 2 Braid TC - Tinned Copper 95 Outer Jacket Outer Jacket Material: Outer Jacket Trade Name Outer Jacket Material Flamarrest(R) LS PVC - Low Smoke Polyvinyl Chloride Overall Cable Overall Nominal Diameter: 5.817 mm Mechanical Characteristics (Overall) Operating Temperature Range: -20C To +75C UL Temperature Rating: 75C Bulk Cable Weight: 61.016 Kg/Km Max. Recommended Pulling Tension: 306.926 N Min. Bend Radius/Minor Axis: 63.500 mm Applicable Specifications and Agency Compliance (Overall) Applicable Standards & Environmental Programs NEC/(UL) Specification: CMP CEC/C(UL) Specification: CMP EU Directive 2011/65/EU (ROHS II): Yes EU CE Mark: No EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes Page 1 of 4 11-14-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 1695A Coax - Low Loss Serial Digital Coax EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005 EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire & Cable): Yes MII Order #39 (China RoHS): Yes RG Type: 6/U Flame Test UL Flame Test: NFPA 262 CSA Flame Test: FT6 Suitability Suitability - Indoor: Yes Plenum/Non-Plenum Plenum (Y/N): Yes Non-Plenum Number: 1694A Electrical Characteristics (Overall) Nom. Characteristic Impedance: Impedance (Ohm) 75 Nom. Inductance: Inductance (H/m) 0.337943 Nom. Capacitance Conductor to Shield: Capacitance (pF/m) 52.8241 Nominal Velocity of Propagation: VP (%) 82 Nominal Delay: Delay (ns/m) 4.06844 Nom. Conductor DC Resistance: DCR @ 20C (Ohm/km) 20.9984 Nominal Outer Shield DC Resistance: DCR @ 20C (Ohm/km) 9.1868 Nom. Attenuation: Freq. (MHz) Attenuation (dB/100m) 1.000 0.787 3.580 1.476 5.000 1.805 7.000 2.133 10.000 2.461 67.500 5.709 71.500 5.840 88.500 6.365 100.000 6.890 135.000 7.874 143.000 8.203 180.000 9.187 270.000 11.155 Page 2 of 4 11-14-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 1695A Coax - Low Loss Serial Digital Coax 360.000 13.124 540.000 17.061 720.000 20.014 750.000 20.342 1000.000 23.951 1500.000 30.185 2000.000 35.763 2250.000 38.060 3000.000 44.950 4500.000 65.292 Max. Operating Voltage - UL: Voltage 300 V RMS Other Electrical Characteristic 1: Impedance tested in accordance with ASTM D 4566 - 05 paragraph 48.2, option 2 using a 75 Ohm fixed bridge and termination. Other Electrical Characteristic 2: Return Loss tested in accordance with ASTM D 4566 - 05 paragraph 50.3, using a 75 Ohm fixed bridge and termination. Minimum Return Loss: Start Freq. (MHz) Stop Freq. (MHz) Min. RL (dB) 5.000 1600.000 23.000 1600.000 4500.000 21.000 Sweep Test Sweep Testing: 100% Sweep tested 5 MHz to 4.5 GHz. Notes (Overall) Notes: Teflon(R) is a registered trademark of E. I. duPont de Nemours and Co. used under license by Belden, Inc. Put Ups and Colors: Item # Putup Ship Weight Color Notes Item Desc 1695A N3U1000 305 MT 18.144 KG GREEN, MIL C #18 FFEP SH FLRST 1695A 0011000 305 MT 19.958 KG BROWN C #18 FFEP SH FLRST 1695A 0021000 305 MT 18.144 KG RED C #18 FFEP SH FLRST 1695A 0031000 305 MT 18.144 KG ORANGE C #18 FFEP SH FLRST 1695A 0041000 305 MT 18.144 KG YELLOW C #18 FFEP SH FLRST 1695A 0061000 305 MT 18.144 KG BLUE, LIGHT C #18 FFEP SH FLRST 1695A 0071000 305 MT 18.144 KG VIOLET C #18 FFEP SH FLRST 1695A 0081000 305 MT 18.144 KG GRAY C #18 FFEP SH FLRST 1695A 0101000 305 MT 18.144 KG BLACK C #18 FFEP SH FLRST 1695A 010500 152 MT 9.072 KG BLACK C #18 FFEP SH FLRST 1695A 0105000 1,524 MT 86.183 KG BLACK C #18 FFEP SH FLRST 1695A 8771000 305 MT 18.144 KG NATURAL C #18 FFEP SH FLRST 1695A 877500 152 MT 8.391 KG NATURAL Z #18 FFEP SH FLRST Notes: C = CRATE REEL PUT-UP. Z = FINAL PUT-UP LENGTH MAY VARY (+ OR -) 10% FOR SPOOLS OR REELS AND(+ OR -) 5% FOR UNREEL CARTONS FROM LENGTH SHOWN. Revision Number: 8 Revision Date: 07-29-2013 (c) 2013 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the Page 3 of 4 11-14-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 1695A Coax - Low Loss Serial Digital Coax Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities and in our Distributor's inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Page 4 of 4 11-14-2013