774
The retainer provides added protection
against non-insertion or disconnection.
Features––––––––––––––––––––––––
• Inner-housing lock
This inner-housing lock secures the plug to the receptacle and
prevents accidental disconnection. The lock is protected and
is not affected by external forces that might result from the
routing of wires.
• Secondary retainers
The secondary retainers enhance safety in case of partial
insertion or accidental release of the contact. Even if a contact
is inserted incompletely, the retainer guides the contact to the
proper position and securely locks it in place.
• Housing lance
The resilient plastic housing lances secure the contacts in
the housings. Since the lances are part of the housings rather
than on the contacts, they are not affected by handling, and
allow the contacts to be lightly inserted without undue force.
This establishes a feeling of uniform insertion and a noticeable
change in that feeling when insertion is completed.
• Mountable on a variety of panels
Due to our unique panel installation locking mechanisms, the
housing can be easily installed on panels of various thickness
without using tools.
• Contacts smoothly insert into the housings
without colliding with internal obstacles
Housings have pin insertion guides that provide smooth and
easy insertion without contact deflection or collision against
internal housing walls.
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC max.
• Voltage rating: 250V AC, DC max.
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ωmax.
After environmental testing/20m Ωmax.
• Insulation resistance: 500M Ωmin.
• Withstanding voltage: 1,500V AC/minute
• Applicable wire: AWG #28 to #20
0.08 to 0.50mm2
• Applicable panel thickness: 0.5 to 1.8mm(.020" to .071")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards–––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
XM CONNECTOR
Crimp style wire-to-wire connectors
Crimp
2.5mm
(.098") pitch
775
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Material and Finish
Model No.
mm2AWG # Insulation O.D.
mm(in.) Pin
contact Socket
contact
Applicable wire Q´ty / reel
Pin contact Socket contact
SXM-001T-P0.6
SXM-01T-P0.6
-
0.08 to 0.33
0.22 to 0.50
0.13 to 0.33
28 to 22
24 to 20
26 to 22
7,000 8,000
1.2 to 1.9(.047 to .075)
1.5 to 1.9(.059 to .075)
1.3 to 1.9(.051 to .075)
Phosphor bronze, tin-plated
SXA-001T-P0.6
SXA-01T-P0.6
SXA-001T-P0.6L 8,000
-
Pin contact Socket contact
Note: 1. Contact JST for special products.
Note: 2. SXM-01T-P0.6 is not UL/CSA approved.
Receptacle housing (for Pin contact) ––––––––––––––––––––––––––––––––––––––––
Circuits
2
3
4
5
6
7
8
9
10
11
12
18
XMR-02V
XMR-03V
XMR-04V
XMR-05V
XMR-06V
XMR-07V
XMR-08V
XMR-09V
XMR-10V
XMR-11V
XMR-12V
XMR-18V
Model No.
1,000
1,000
500
500
500
500
500
500
500
500
500
500
Q´ty / bag
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .886)
25.0( .984)
27.5(1.083)
20.0( .787)
AB
Material
Nylon 66, UL94V-0
8.9( .350)
9.9( .390)
12.4( .488)
14.9( .587)
17.4( .685)
19.9( .783)
22.4( .882)
24.9( .980)
27.4(1.079)
29.9(1.177)
32.4(1.276)
24.9( .980)
Dimensions mm(in.)
(2 to 12 circuits) (18 circuits)
12.5(.492)
1.9(.075)2.4(.094)
6.3(.248) 2.5
(.098)
0.8
(.031)
2.9(.114)1.3(.051)
6.5(.256)
1.9(.075)
2.3(.091)
3.1(.122)
0.8
(.031)
2.9(.114)1.3(.051)
B
A
10.8(.425)
20.2(.795) 7.9(.311)
2.5(.098)
A
B
10.8(.425)
20.2(.795) 15.5(.610)
2.5(.098)
Note: Receptacle housings without panel lock device are also available for 2, 3, 4, 6, 7, 8 and 9 circuits.
XM CONNECTOR
776
XM CONNECTOR
Plug housing (for Socket contact) –––––––––––––––––––––––––––––––––––––––––––
Circuits
2
3
4
5
6
7
8
9
10
11
12
18
XMP-02V
XMP-03V
XMP-04V
XMP-05V
XMP-06V
XMP-07V
XMP-08V
XMP-09V
XMP-10V
XMP-11V
XMP-12V
XMP-18V
Model No.
1,000
1,000
1,000
500
500
500
500
500
500
500
500
500
Q´ty / bag
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .886)
25.0( .984)
27.5(1.083)
20.0( .787)
AB
Material
Nylon 66, UL94V-0
8.8( .346)
9.8( .386)
12.3( .484)
14.8( .583)
17.3( .681)
19.8( .780)
22.3( .878)
24.8( .976)
27.3(1.075)
29.8(1.173)
32.3(1.272)
24.8( .976)
Dimensions mm(in.)
(18 circuits)
Retainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
A
2.5(.098)
2.5
(.098) 7.8(.307)
0.95
(.037)
Circuits Model No. Q´ty / bag
2
3
4
5
6
7
8
9,18
10
11
12
XMS-02V
XMS-03V
XMS-04V
XMS-05V
XMS-06V
XMS-07V
XMS-08V
XMS-09V
XMS-10V
XMS-11V
XMS-12V
Dimensions A mm (in.)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Material
Glass-filled Nylon 66, UL94V-0
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .886)
25.0( .984)
27.5(1.083)
(2 to 12 circuits)
Note: Commonly used for 9-circuit and 18-circuit housings.
B
A
11.5(.453)
12.0(.472) 6.3(.248)
7.7(.303)
2.5(.098)
B
A
2.5(.098)
11.5(.453)
12.0(.472) 13.7(.539)
14.6(.575)
777
XM CONNECTOR
Panel Layout –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(2 to 12 circuits) (18 circuits)
Circuits
2
3
4
5
6
7
8
9
10
11
12
18
XMR-02V
XMR-03V
XMR-04V
XMR-05V
XMR-06V
XMR-07V
XMR-08V
XMR-09V
XMR-10V
XMR-11V
XMR-12V
XMR-18V
Receptacle housing
9.3( .366)
10.3( .406)
12.8( .504)
15.3( .602)
17.8( .701)
20.3( .799)
22.8( .898)
25.3( .996)
27.8(1.094)
30.3(1.193)
32.8(1.291)
25.3( .996)
B ± 0.05(.002)
12.6( .496)
13.6( .535)
16.1( .634)
18.6( .732)
21.1( .831)
23.6( .929)
26.1(1.028)
28.6(1.126)
31.1(1.224)
33.6(1.323)
36.1(1.421)
28.6(1.126)
Panel hole dimensions mm(in.) General tolerance
Applicable panel thickness mm(in.)
0.5 to 1.8(.020 to .071)
A+0.1
0 ( )
+.004
0
Note:
1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed.
2. The strength of the panel must be considered when punching two or more holes.
3. The connector must be inserted from the same side as the hole is punched.
Assembly layout –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(2 to 12 circuits) (18 circuits)
15.5(.610)
24.4(.961)
24.4(.961)
7.9(.311)
A ( )
+
0.1
0
B±0.05(.002)
5.5±0.05
(.217±.002)
8.2
(.323 )
+
0.1
0
+
.004
0
+
.004
0
11.6±0.05
(.457±.002)
15.8
(.622 )
+
0.1
0
B±0.05(.002)
A ( )
+
0.1
0
+
.004
0
+
.004
0
778
Contact position location numbers ––––––––––––––––––––––––––––––––––––––––––
Contact position numbers are stamped Retainer
Retainer
Receptacle housing Plug housing
2
3
4
1
6
5
7
8
9
10
11
12
2
3
4
11
12
110
13
615
514
716
817
918
Receptacle housing
11
10
9
12
7
8
6
5
4
3
2
1
8
7
6
17
16
918
15
413
514
312
211
110
Plug housing
XM CONNECTOR
Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SXM-001T-P0.6 APLMK SXA/M001-06 APLNC SXA/M001-06 ––APLSC SXA/M001-06
SXM-01T-P0.6 APLMK SXA/M01-06 APLNC SXA/M01-06 ––APLSC SXA/M01-06
SXA-001T-P0.6 APLMK SXA/M001-06 APLNC SXA/M001-06 ––APLSC SXA/M001-06
SXA-01T-P0.6 APLMK SXA/M01-06 APLNC SXA/M01-06 ––APLSC SXA/M01-06
SXA-001T-P0.6L APLMK SXA/M001-06L APLNC SXA/M001-06L ––APLSC SXA/M001-06L
