For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 217
IEC and British Standard Fuses
IEC &
British
Fuses
Application Data
The standard range of fuses for low voltage industrial and
general purpose applications meet the requirements of
BS 88 and IEC 60269. By using advanced fuse technology,
current ratings up to 400A have compact dimensions, but
retain standard dimensional and performance requirements.
These designs are for 315/240V systems. The standard
range of fuses are available from 2-1250A in the following
tag forms: Offset Blade - Offset Bolted - Center Bolted.
Supplementary ranges cover applications up to 660Vac and
500Vdc including those with nonstandard tag fixings.
Cooper Bussmann fuses are manufactured under quality
systems independently assessed to BS 5750 (ISO 9002) and
appropriate ratings carry the ASTA 20 endorsement.
Selecting fuses is relatively simple and effective. The
following notes cover the majority of applications. For further
information contact our Application Engineers at
636-527-1270.
Circuit Loading
The current rating of the fuse should not be less than the full
load current of the circuit. The circuit should be so designed
that small overloads of long duration will not be of frequent
occurrence.
Cable Ratings & Protection
There is an increasing move away from 70°C PVC insulation
to materials that are more environmentally friendly, for
example 90°C XLPE. The ratings of fusegear, switches,
accessories, etc. are generally based upon the equipment
being connected to conductors intended to be operated at a
temperature not exceeding 70°C in normal service.
In view of the above, it is recommended that the practice of
designs based upon conductor temperatures of 70°C be
regarded as the norm. The equipment manufacturer should
be consulted to ascertain the reduction of nominal current
rating of the equipment if conductor temperatures exceeding
70°C are used. In addition, an overriding factor is often
voltage drop.
Fuses with gG characteristics protect associated cables
against both overload and short-circuit current, provided that
the current rating of the fuse 1N is equal or less than the
current carrying capacity of the cable 1z.
In motor circuits, the motor starter will provide the overload
protection and the fuses will provide the short-circuit
protection. The maximum fuse size that can be used
depends upon the type of cable used and is determined
using the appropriate K factor. The following table gives the
maximum sizes of fuses that are recommended for two
popular cables with copper conductors, 70°C PVC (K = 115)
and 90°C thermosetting (K = 143).
Section Contents Page
Application Data .....................217-218
CSA Type P and Type D fuses
(CDS, CDN & PON) . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
Tron®HRC Form II Class C fuses
(CGL Form II Class C) . . . . . . . . . . . . . . . . . . . . . . . . . . 220
HRCI Industrial ceramic body fuses (CIF21 HRCI-CA &
CIF06 HRCI-CB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
HRCI-J Fast-acting fuses (CJ HRCI-J) . . . . . . . . . . . . . . . 222
HRCI-Miscellaneous Type K fuses (CIH, CIK &
CIL HRCI-MISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
HRC Form II current-limiting fuses . . . . . . . . . . . . . . . . . .224
BS 88 British Standard low voltage fuses (SSD, NSD,
ESD & STD, NITD, AAO, BAO, OSD, CEO,
DEO BS 88 Part 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
BS 88 British Standard low voltage fuses (AC, AD, BC,
BD, CD, DD, ED, EFS & EF, FF, FG, GF, GG,
GH BS 88) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226
DIN Style Type D (D16, D27, D33, D125 Type D) . . . . . . 227
Neozed low voltage fuses (NZ01, NZ02 Type D0) . . . . . . 227
NH HRC Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228-231
Class gG/gL IEC Industrial ferrule fuses (C08G, C08M,
C10G, C10M, C14G, C14M, C22G, C22M) . . . . . . . . . . 232
Class aM IEC Industrial ferrule fuses (C08M, C10M,
C14M, C22M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233
Class aM & gG/gL IEC Industrial ferrule fuses with striker
(C14G_S, C22G_S, C14M_S, C22M_S) . . . . . . . . . . . . . 234
HRC fuse holders
CAMaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235
SAFEloc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235
RED indicates NEW information
IEC & British Standard Fuses
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
218
Application Data for BS Low Voltage Fuses
IEC & British Standard Fuses
Max. Fuse Rating (amps)
Cable Size (mm2) K = 115 K = 143
11616
1,5 20 25*
2.5 32* 32*
4 50* 50*
6 63* 63*
10 100* 125*
16 125* 160*
25 200* 250*
35 315* 355*
50 400* 500
70 560 630
95 710 800
120 800 1000
* Extended Motor Circuit dual ratings can be used.
Protection Against Electrical Shock
For a TN System, a disconnecting time not exceeding 5s is
permitted for a distribution circuit. The maximum values of
earth fault loop impedance (Zs) of 240V for Cooper
Bussmann gG fuses to BS 88: Parts 2 and 6 are:
Rating (A) Zs (Ohms) Rating (A) Zs (Ohms) Rating (A) Zs (Ohms)
6 14 50 1.1 250 0.16
10 7.7 63 0.86 315 0.13
16 4.3 80 0.60 400 0.096
20 3.0 100 0.44 500 0.073
25 2.4 125 0.35 630 0.054
32 1.9 160 0.27 800 0.044
40 1.4 200 0.20
Ambient Temperature
The derating, in terms of current, of 0.5% per °C above an
ambient of 35°C is recommended.
Interr upting Rating
The standardized interrupting rating values are 80kA for
voltages of 415Vac and above, and 40kA for DC
applications. The 240Vac designs have an interrupting rating
of 50kA.
Coordination Ratio
All fuses to BS 88 Parts 2 and 6 will give a coordination ratio
of 2:1; and for most practical situations a ratio of 1.6:1 (two
steps in the R10 series). Example: an upstream fuse rated at
160A will coordinate with a downstream fuse rated at 100A.
Current and Energy Limitation
The range of fuses have pre-arcing I2t values towards the
bottom limits of BS 88 Parts 2 and 6. This ensures excellent
current and energy limitation. They also have lower power
losses at rated current. This assists in the appropriate
interchangeability with other makes of fuses.
Transformers
When fuses are used on the primary side of transformers,
the normal fuse current rating should be at least twice the
nominal transformer primary current.
Fluorescent Lighting
The normal fuse current rating should be at least twice the
normal full load current of the maximum number of lights to
be simultaneously switched.
Capacitor Circuits
For power factor correction in capacitor circuits, the fuse
should be chosen with a current rating greater than 1.5 times
the rated capacitor current. This takes into account the high
inrush current, circuit harmonics and capacitor tolerances.
Motor Circuits
In motor circuits, the fuse has to withstand the motor's
starting current and often requires a higher rating than the
motor's full load current. Coordination recommendations are
made by the manufacturers of motor starters in accordance
with IEC 60947-4-1. To get Type 2 coordination with fuses,
tests are performed with the latest gG or gM fuses to BS 88
or IEC 60269 that have pre-arcing I2t values towards the
bottom of specified limits. This means that Cooper
Bussmann fuses are suitable to provide Type 2 coordination.
Extended dual ratings of motor circuit protection fuses with
gM characteristics are available in most popular fuse sizes to
extend the use of associated equipment with appropriate
economies. In the majority of applications, gG fuses are
used. It is not essential to use gM fuses for motor circuit
protection, they simply extend the utilization of standard
equipment.
Below is a table of recommended fuses at 415V. In most
applications, the run-up time is less than 5 seconds and duty
is infrequent - no more than twice per hour. The next larger
rating should be used for more demanding applications.
Direct On-line Asst. Star t
Standard Motor Circuit Standard
Rating Motor (gG) (gM) (gG)
kW A A A A
0.25 0.8 4 - 2
0.37 1.1 4 - 2
0.55 1.5 6 - 4
0.75 2.0 6 - 4
1.1 3 0 10 - 6
1.5 3.6 16 - 0 1
2.2 5.0 16 - 0 1
3.0 6.5 20 - 6 1
4.0 8.4 20 - 6 1
5.5 11.0 25 20M25 2 20
7.5 15.0 40 32M40 25
11.0 20.0 50 32M50 32
15.0 27.0 63 32M63 40
18.5 33.0 80 63M80 50
22.0 38.0 80 63M80 50
30.0 54.0 100 63M100 80
37.0 66.0 125 100M125 80
45.0 79.0 160 100M160 100
55.0 98.0 160 100M160 100
75.0 135.0 250 200M250 160
90.0 155.0 250 200M250 160
110.0 185.0 315 200M315 200
132.0 220.0 355 315M400 250
150.0 250.0 355 315M400 315
185.0 310.0 450 400M500 355
200.0 335.0 500 4 00M500 400
225.0 375.0 560 - 400
250.0 415.0 560 - 450
280.0 460.0 630 - 500
335.0 562.0 710 - 630
355.0 596.0 800 - 710
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 219
CSA Type P and Type D Fuses
IEC &
British
Fuses
IEC & British Standard Fuses
Catalog Numbers
Basic Catalog Dimensions in (mm)
Number Amp A B Max C Min D Min E F
and Volts Ratings Overall Diameter Blade Length Barrel Length Blade Thickness Blade Width
1-30 2.0 (50.8) 0.56 (14.3) — — — —
35-60 3.0 (76.2) 0.81 (20.6) — — — —
CDN/PON 250Vac 70-100 5.88 (149.4) — 1.0 (25.4) — 0.13 (3.2) 0.75 (19.1)
110-200 7.3 (185.4) — 1.38 (34.9) 4.13 (104.8) 0.19 (4.8) 1.13 (28.6)
225-400 8.63 (219.2) — 1.88 (47.6) 4.63 (117.5) 0.25 (6.4) 1.63 (41.3)
450-600 10.38 (263.7) — 2.25 (57.2) 5.19 (131.8) 0.25 (6.4) 2 (50.8)
1-30 5.0 (127.0) 0.81 (20.6) — — — —
35-60 5.5 (139.7) 1.06 (27.0) — — — —
CDS 600Vac 70-100 7.88 (200.2) — 1.0 (25.4) — 0.13 (3.2) 0.75 (19.1)
110-200 9.63 (244.6) — 1.38 (34.9) 6.13 (115.6) 0.19 (4.8) 1.13 (28.6)
225-400 11.63 (295.4) — 1.88 (47.6) 7.13 (118.1) 0.25 (6.4) 1.63 (41.3)
450-600 13.38 (339.9) — 2.25 (57.2) 8.19 (208.0) 0.25 (6.4) 2 (50.8)
To Order
To order, specify Basic Catalog Number and amp rating. Example: CDN-30
E
B
F
A
DC
Knife Blade—70 through 600A
AB
Ferrule Design—1 through 60A
Data Sheet: 4126
CDS, CDN & PON Type P & D
Specifications
Description: CSA time-delay Type D & P
fuses.
Dimensions: See Catalog Numbers table
and Dimensions illustration.
Ratings:
Volts: — 250Vac (CDN & PON)
— 600Vac (CDS)
Amps: — 10-600A
IR: — 10kA minimum
Agency Information: CE, CSA Certified to C22.2 No. 59.1.
Features and Benefits
• Economical fuse in a variety of ratings for applications not
requiring time-delay.
Typical Applications
• Lighting, heating and other circuits not subject to temporary
surges and where available short-circuit current are
relatively low.
Basic Catalog Numbers
Time-Delay CSA Type “D” Fuses
Catalog Amp
Numbers Volts Ratings
Below 10A use FRN-R 10, 12, 15, 20, 25, 30,
35, 40, 45, 50, 60, 70, 80, 90, 100
CDN 250Vac 110, 125, 150, 175, 200, 225, 250, 300, 350, 400,
450, 500, 600
Below 10A use FRS-R 10, 12, 15, 20, 25, 30,
35, 40, 45, 50, 60
CDS 600Vac 70, 80, 90, 100, 110, 125, 150, 175, 200,
225, 250, 300, 350, 400, 450, 500, 600
One-Time CSA Type “P” Fuses
Catalog Amp
Number Volts Ratings
PON 250Vac 15, 20, 25, 30, 35, 40, 45, 50, 60
Dimensions
CGL For m II Class C
Specifications
Description: Current-limiting HRCII-C fuses
designed to withstand inrush currents on
typical motor start-ups while offering high
current limitation in the short-circuit region.
Dimensions: See Dimensions illustrations.
Ratings:
Volts: — 600Vac/250Vdc (1-30A)
Amps: — 1-600A
IR: — 200kA (40,000A DC)
Agency Information: CE, CSA Certified,
C22.2 No. 106.
Features and Benefits
• Close sizing to loads allows using smaller and less costly
switches
• Provides a higher degree of short-circuit protection
• Helps protect motors against burnout from overloads
Typical Applications
• For use in circuits subject to surge currents such as those
caused by motors, transformers and other inductive loads
Catalog Numbers (-Amps)
CGL-1 CGL-40 CGL-175
CGL-2 CGL-45 CGL-200
CGL-3 CGL-50 CGL-225
CGL-4 CGL-60 CGL-250
CGL-6 CGL-70 CGL-300
CGL-10 CGL-80 CGL-350
CGL-15 CGL-90 CGL-400
CGL-20 CGL-100 CGL-450
CGL-25 CGL-110 CGL-500
CGL-30 CGL-125 CGL-600
CGL-35 CGL-150
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
220
Tron®HRC For m II Class C Fuses
IEC & British Standard Fuses
Data Sheet: 4125
2.0"
(50.8mm)
2.80"
(71.04mm)
3.5"
(88.9mm)
0.94"
(23.81mm)
0.06"
(1.59mm)
2.0"
(50.8mm)
2.80"
(71.04mm)
3.31"
(84.14mm)
0.81"
(20.64mm)
0.22"
(5.56mm)
0.22"
(5.56mm)
0.34"
(8.73mm)
CGL 1-30
CGL 35-60
0.50"
(12.7mm)
0.81"
(20.64mm)
0.22"
(5.56mm)
0.22"
(5.56mm)
1.06"
(26.92mm)
0.06"
(1.59mm)
CGL 70-100
0.75"
(19.05mm)
1.34"
(34.04mm)
0.343"
(8.71mm)
0.343"
(8.71mm)
2.39"
(60.72mm)
3.64"
(92.47mm)
4.31"
(109.54mm)
1.375"
(34.93mm)
0.09"
(2.29mm)
CGL 110-200
0.75"
(19.05mm)
0.343
(8.71mm)
0.343"
(8.71mm)
3.00"
(76.2mm)
4.30"
(109.22mm)
5.31"
(134.87mm)
1.50"
(38.1mm)
0.125"
(3.18mm)
CGL 225-400
1.0"
(25.4mm)
0.38"
(9.53mm)
3.0"
(76.2mm)
5.25"
(133.35mm)
8.19"
(207.96mm)
2.38"
(60.33mm)
0.19"
(4.76mm)
1.0"
(25.4mm)
CGL 450-600
0.41"
(10.32mm)
3.00"
(76.2mm)
1.0"
(25.4mm)
1.0"
(25.4mm)
0.375"
(9.53mm)
3.0"
(76.2mm)
5.25"
(133.35mm)
8.19"
(207.96mm)
.60"
(15.24mm)
Dimensions
CIF21 HRCI-CA
Specifications
Description: The HRCI-CA fuse provides
both overload and short-circuit protection to
HRCI requirements. Offset blades for bolt-on
mounting. CIF21 fuse fits the Cooper
Bussmann CAMaster fuse holder (see data
sheet 4132).
Dimensions: See Dimensions illustration.
Construction: Ceramic body.
Ratings:
Volts: — 600Vac/250Vdc
Amps: — 1-30A
IR: — 200kA RMS Sym.
Agency Information: CE, CSA C22.2, No. 106-M92.
Mounting: Bolt-on.
Catalog Numbers
Catalog Amp
Numbers Ratings
1CIF21 1
3CIF21 3
6CIF21 6
10CIF21 10
15CIF21 15
20CIF21 20
25CIF21 25
30CIF21 30
CIF06 HRCI-CB
Specifications
Description: A miniature industrial fuse that
provides both short-circuit and overload
protection and the CIF06 fits the 30A
SAFEloc fuse holder.
Dimensions: See Dimensions illustration.
Construction: Ground ceramic body with
plated end caps.
Ratings:
Volts: — 600Vac/250Vdc
Amps: — 1-30A
IR: — 200kA RMS Sym.
Agency Information: CE, CSA C22.2 No. 106-M92 (3-30A
only).
Mounting: Clip-in offset blades.
Catalog Number
Catalog Amp
Numbers Ratings
1CIF06 1
3CIF06 3
6CIF06 6
10CIF06 10
15CIF06 15
20CIF06 20
25CIF06 25
30CIF06 30
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 221
HRCI Industrial Ceramic Body Fuses
IEC &
British
Fuses
IEC & British Standard Fuses
Data Sheet: 4128
Data Sheet: 4127
2.15 (54.5)
1.44 (35.5)
1.75 (44.5)
0.19 (4.7)
0.54 (13.8)
0.44 (11.1)
0.03 (0.81)
Features and Benefits
• Close sizing to loads allows using smaller and less costly
switches
• Provides a higher degree of short-circuit protection
• Helps protect motors against burnout from overloads
Typical Applications
• For use in circuits subject to surge currents such as those
caused by motors, transformers and other inductive loads
Dimensions - in (mm)
2.38 (60.4)
1.44 (35.5)
0.54 (13.8)
0.14 (3.5)
0.5 (12.7)
0.03 (3.5)
Features and Benefits
• Close sizing to loads allows using smaller and less costly
switches
• Provides a higher degree of short-circuit protection
• Helps protect motors against burnout from overloads
Typical Applications
• For use in circuits subject to surge currents such as those
caused by motors, transformers and other inductive loads
Dimensions - in (mm)
CJ HRCI-J
Specifications
Description: HRCI-J fast-acting
fuses are industrial duty fuses with
the excellent current-limiting
characteristics of fast-acting HRCI-J
fuses to limit damage to equipment
and installations by the thermal and
magnetic energy associated with a
large short-circuit fault current.
Overload characteristics limit cable
damage due to low overload currents.
Dimensions: See Catalog Numbers table and Dimensions
illustrations.
Construction: Ceramic body fuse.
Ratings:
Volts: — 600Vac (or less), 250Vdc
Amps: — 1-600A
IR: — 200kA
Agency Information: CSA C22.2 No. 106 M92; Designed
to BS 88:2, IEC 60269-2.
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
222
HRCI-J Fast-acting Fuses
IEC & British Standard Fuses
Data Sheet: 4129
Catalog Numbers
Catalog Amp Dimensions in (mm)
Numbers Ratings ABCDEFGHJK
1CJ 1
3CJ 3
6CJ 6
10CJ 10
15CJ 15 2.25 (57) 0.5 (12.7) 0.81 (20.6) ———————
20CJ 20
25CJ 25
30CJ 30
35CJ 35
40CJ 40
45CJ 45 2.38 (60) 0.63 (16) 1.06 (27) ———————
50CJ 50
60CJ 60
70CJ 70
80CJ 80 4.63 (117) 3.63 (92) 1.13 (28) 0.75 (19) 0.13 (3.2) 1 (25.4) 0.5 (12.7) 0.28 (7.1) 0.38 (9.5) 2.63 (67)
90CJ 90
100CJ 100
110CJ 110
125CJ 125
150CJ 150 5.75 (146) 4.38 (111) 1.63 (41) 1.13 (28.6) 0.19 (4.8) 1.38 (35) 0.69 (17.5) 0.28 (7.1) 0.38 (9.5) 3 (76)
175CJ 175
200CJ 200
225CJ 225
250CJ 250
300CJ 300 7.13 (181) 5.25 (133) 2.13 (54) 1.63 (41) 0.25 (6.3) 1.88 (47.6) 0.94 (24) 0.41 (10.3) 0.53 (13.5) 3.38 (86)
350CJ 350
400CJ 400
450CJ 450
500CJ 500 8 (203) 6 (152) 2.63 (66) 2 (51) 0.38 (9.5) 2.13 (54) 1 (25.4) 0.53 (13.5) 0.69 (17.5) 3.75 (96)
600CJ 600
A
JF
K
B
H
DC
E
G
A
BB
C
Dimensions
1CJ to 60CJ
70CJ to 600CJ
Catalog Numbers
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 223
HRCI - Miscellaneous Type K Fuses
IEC &
British
Fuses
IEC & British Standard Fuses
Dimensions
Data Sheet: 4130
CIH, CIK & CIL HRCI-MISC
Specifications
Description: HRI fuses provide both overload
and short-circuit protection, featuring offset
blades for bolt down mounting.
Dimensions: See Catalog Numbers table and
Dimensions illustration.
Construction: Ceramic body.
Ratings:
Volts: — 600V
Amps: — 1-100A
IR: — 200kA@600V
Agency Information: CE, CSA C22.2 No.
106 M92.
E
G
G
H
D
K
F
A
L
C
J
B
(The CIL14 has a rejection hole, not a slot as shown above.)
Fuse Fuse Holder
1-30A CM30CF
35-60A CM60CF
Catalog Numbers
Catalog Amp Dimensions: in (mm)
Numbers Ratings A Max B Max C Max D Nom E Nom F Nom G Nom H Nom J Max K Nom L Max
1CIH07 1 2.25 (57) 0.94 (24) 3.38 (86) 0.38 (9.2) 0.04 (1.0) 2.88 (73) 0.21 (5.2) 0.31 (8) 1 (25.4) 0.10 (2.6) 2.38 (60)
3CIH07 3
6CIH07 6
10CIH07 10
15CIH07 15
20CIH07 20
25CIH07 25
30CIH07 30
35CIK07 35 2.28 (58) 1.06 (27) 3.56 (91) 0.5 (12.7) 0.05 (1.2) 2.88 (73) 0.21 (5.2) 0.41 (10.5) 1.09 (28) 0.13 (3.2) 2.38 (61)
40CIK07 40
50CIK07 50
60CIK07 60
80CIL14 80 2.75 (70) 1.44 (37) 4.38 (111) 0.75 (19) 0.09 (2.5) 3.69 (94) 0.34 (8.7) 0.41 (10.5) 1.5 (38.5) — 2.91 (74)
90CIL14 90
100CIL14 100
2.25 (57) 0.94 (24) 3.38 (86) 0.38 (9.2) 0.04 (1.0) 2.88 (73) 0.21 (5.2) 0.31 (8) 1 (25.4) 0.10 (2.6) 2.38 (60)
2.38 (61)
2.91 (74)
0.13 (3.2)
—
1.09 (28)
1.5 (38.5)
0.41 (10.5)
0.41 (10.5)
0.21 (5.2)
0.34 (8.7)
2.88 (73)
3.69 (94)
0.05 (1.2)
0.09 (2.5)
0.5 (12.7)
0.75 (19)
3.56 (91)
4.38 (111)
1.06 (27)
1.44 (37)
2.28 (58)
2.75 (70)
Recommended Fuse Holders
HRC For m II
Specifications
Description: HRC Form II
current-limiting fuses.
Dimensions: See Catalog
Numbers table and Dimensions
illustrations.
Construction: Ceramic body.
Ratings:
Volts: — 600Vac (or less)
— 250Vdc
Amps: — 2-600A
IR: — 200kA RMS Sym.
Agency Information: CE, CSA C22.2 No.106M1992;
BS 88:2, IEC 60269:2.
Typical Applications
• Used to protect motor control circuits, together with
contactors and overload protection relays to provide Type 2
coordination - per IEC 60947-4.
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
224
HRC For m II Cur rent-limiting Fuses
IEC & British Standard Fuses
Data Sheet: 4131
Catalog Numbers
Catalog Amp Dimensions in (mm)
Numbers Ratings A B C D E F G H J K CSA Category
2H07C 2 1.38 (35) 0.56 (14) 3.38 (85) 0.38 (9) 0.06 (1.2) 2.88 (73) 0.22 (5.6) 0.31 (8) 0.56 (14) — HRCII-C
4H07C 4
6H07C 6
10H07C 10
15H07C 15
20H07C 20
25H07C 25
30H07C 30
40K07C 40 2.19 (56) 0.88 (22) 3.44 (87) 0.5 (13) 0.06 (1.2) 2.88 (73) 0.22 (5.6) 0.31 (8) 0.88 (22) — HRCII-C
50K07C 50
60K07C 60
80K07CR 80 2.19 (56) 0.88 (22) 3.75 (95) 0.5 (13) 0.06 (1.2) 2.88 (73) 0.22 (5.6) 0.31 (8) 0.88 (22) — HRCII-MISC
100K07CR 100
80L14C 80 2.38 (60) 0.88 (21.4) 4.38 (111) 0.56 (14.3) 0.13 (3.2) 3.69 (94) 0.34 (8.7) 0.44 (11) 1 (25.4) — HRCII-C
100L14C 100
125M14C 125 2.56 (65) 1.5 (38) 4.38 (111) 0.75 (19) 0.09 (2.4) 3.69 (94) 0.34 (8.7) 0.44 (11) — — HRCII-MISC
150M14C 150
200M14C 200
80L09C 80 2.38 (60) 0.88 (21.4) 5 (127) 0.56 (14) 0.13 (3.2) 4.38 (111) 0.34 (8.7) 0.44 (11) — — HRCII-MISC
100L09C 100
125M09C 125 2.56 (65) 1.5 (38) 5.38 (136) 0.75 (19) 0.13 (3.2) 4.38 (111) 0.34 (8.7) 0.56 (14) — — HRCII-C
150M09C 150
200M09C 200
250P09C 250 3.06 (178) 2.31 (59) 5.38 (136) 1 (25.4) 0.19 (4.8) 4.38 (111) 0.34 (8.7) 0.5 (13) — — HRCII-MISC
300P09C 300
350P09C 350
400P09C 400
250P11C 250 3.06 (178) 2.31 (59) 8.25 (210) 1 (25.4) 0.19 (5) 5.25 (133) 0.41 (10) 0.63 (16) — 1 (25) HRCII-C
300P11C 300
350P11C 350
400P11C 400
450R11C 450 3.19 (81) 2.88 (73) 8.25 (210) 1 (25.4) 0.25 (6.3) 5.25 (133) 0.41 (10) 0.63 (16) — 1 (25) HRCII-C
500R11C 500
600R11C 600
E
D
G
F
A
H
C
J
B
E
D
G
F
A
H
C
J
B
D
G
C
A
F
B
E
H
FB
E
G
C
A
K
D
K
H
H07C
(Of fset Blades)
K07C/K07CR/
L14C/M14C
(Of fset Blades)
L09C/M09C/P09C
(Center Blades)
P11C/R11C
(Center Blades)
Dimensions
1.38 (35) 0.56 (14) 3.38 (85) 0.38 (9)
0.06 (1.2) 2.88 (73) 0.22 (5.6) 0.31 (8)
0.56 (14) —
HRCII-C
HRCII-MISC
HRCII-C
HRCII-C
HRCII-C
HRCII-MISC
HRCII-MISC
—
—
—
—
—
—
—
1 (25)
1 (25)
0.88 (22)
1 (25.4)
—
—
—
—
—
—
0.44 (11)
0.56 (14)
0.5 (13)
0.63 (16)
0.34 (8.7)
0.41 (10)
3.69 (94)
4.38 (111)
5.25 (133)
0.13 (3.2)
0.09 (2.4)
0.13 (3.2)
0.19 (4.8)
0.19 (5)
0.25 (6.3)
0.5 (13)
0.56 (14.3)
0.75 (19)
0.56 (14)
0.75 (19)
1 (25.4)
3.44 (87)
3.75 (95)
4.38 (111)
5 (127)
5.38 (136)
8.25 (210)
2.19 (56) 0.88 (22)
2.38 (60) 0.88 (21.4)
1.5 (38)
1.5 (38)
2.31 (59)
2.88 (73)
2.38 (60) 0.88 (21.4)
2.56 (65)
2.56 (65)
3.19 (81)
3.06 (178)
SSD, NSD, ESD BS 88 Part 1
Specifications
Description: The NSD and ESD are low voltage
fuses complying with general purpose gG
characteristics.
Construction: Ceramic body.
Ratings:
Volts: — 240-550Vac (See Catalog Numbers table)
Amps: — 2-63A (See Catalog Numbers table)
— 20M25-63M100A Motor Starter ratings
(See Catalog Numbers table)
IR: — 33kA (SSD)
— 80kA (NSD, ESD)
Agency Information: CE, Meets the requirements of
BS 88 Part 1 and IEC 60269-1.
Mounting: Offset blades.
Basic Catalog Numbers
Basic Max AC
Catalog Amp Voltage BS 88
Numbers Ratings Ratings Ref.
SSD 2, 4, 6, 10, 16, 20, 25, 32 240 E1
NSD 2, 4, 6, 10, 16, 20, 25, 32, 550 F1
20M25*, 20M32*, 20M36*, 32M36*, 32M40*, 415 F1
32M50*, 32M63* 415 F1
ESD 2, 4, 6, 10, 16, 25, 32 550 F2
40, 50, 63, 63M80, 63M100* 415 F2
*“M” indicates motor starter ratings.
To Order
To order, specify Basic Catalog Number and amp rating. Example: SSD-20
Recommended Fuse Holders
Basic Fuse Holder Catalog
Catalog Numbers Numbers
NSD 32NNSF
ESD 63ENSF
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 225
BS 88 British Standard Low Voltage Fuses
IEC &
British
Fuses
IEC & British Standard Fuses
STD, NITD, AAO, BAO, OSD, CEO, DEO
BS 88 Part 1
Specifications
Description: The STD to DEO types are low
voltage fuses complying with general purpose gG
characteristics.
Construction: Ceramic body.
Ratings:
Volts: — 240-550Vac (See Catalog Numbers
table)
Amps: — 2-200A (See Catalog Numbers table)
— 20M25-200M315A Motor Starter ratings
(See Catalog Numbers table)
IR: — 33kA (STD)
— 80kA (NITD, AAO, BAO, CEO, DEO)
Agency Information: CE, Meets the requirements of
BS 88 Part 1 and IEC 60269-1.
Mounting: Offset bolted blades.
Typical Applications
• The STD type are used in 240V street lighting cut-outs.
• NITD to DEO types used for industrial and general purpose
applications
Basic Catalog Numbers
Basic Max AC
Catalog Amp Voltage BS 88
Numbers Ratings Ratings Ref.
STD 2, 4, 6, 10, 16, 20, 25, 32 240 —
NITD 2, 4, 6, 10, 16, 20, 25, 32 550 —
20M25*, 20M32*, 32M40*, 32M50*, 32M63* 415 —
AAO 2, 4, 6, 10, 16, 20, 25, 32, 32M40*, 32M50*, 32M63* 550 —
BAO 40, 50, 63, 63M80*, 63M100* 550 A3
CEO 32, 40, 50, 63, 80, 100 550 A4
100M125*, 100M160*, 100M200* 415 A4
DEO 125, 160, 200, 200M250*, 200M315* 415 —
OSD 80, 100 550 —
100M125*, 100M160* 415 —
*“M” indicates motor starter ratings.
To Order
To order, specify Basic Catalog Number and amp rating. Example: BAO-16
Recommended Fuse Blocks & Holders
Basic Fuse Block/Holder
Catalog Numbers Catalog Numbers
NITD CM32FC
AAO CM32F
BAO CM63F
OSD CM100F
CEO BH-0111
Data Sheets 4105 (SSD), 4100 (NSD) and 4101 (ESD) Data Sheets 4123 (STD), 4106 (NITD), 4109 (AAO), 4112
(BAO), 4107 (OSD), 4115 (CEO) and 4117 (DEO)
EF, FF, FG, GF, GG, GH
BS 88
Specifications
Description: Low voltage fuses
complying with general purpose gG
characteristics and available up to
400A with two hole mount and up
to 1250A with four hole mount.
Construction: Ceramic body.
Ratings:
Volts: — 415/550Vac, 250/400Vdc
(See Catalog Numbers table for details)
Amps: — 355-1250
IR: — See Catalog Numbers table
Agency Information: CE, Meets the requirements of
BS 88 Parts 1 and 2 and IEC269-1.
Mounting: Center bolted blades, four-hole mount.
Basic Interr upting Max Voltage
Catalog Amp Ratings Ratings BS 88
Numbers Ratings AC DC AC DC Ref.
EF 355, 400 80kA — 415 — C1
400M500* 80kA — 550 — —
FF 450, 500, 560, 630 80kA 40kA 550 400 C2
FG 450, 500, 560, 630 80kA 40kA 550 400 —
GF 710, 800 80kA 40kA 550 250 C3
GG 710, 800 80kA 40kA 550 250 —
1000, 1250 80kA — 550 — —
GH 710, 800, 1000, 1250 80kA — 550 — —
*“M” indicates motor starter ratings.*“M” indicates motor starter ratings.
To Order
To order, specify Basic Catalog Number and amp rating. Example: FG-450
AC, AD, BC, BD, CD, DD, ED, EFS BS 88
Specifications
Description: Low voltage fuses that
comply with general purpose gG
characteristics and available up to 400A
with two hole mount and up to 1250A
with four hole mount.
Construction: Ceramic body.
Ratings:
Volts: — 415/550Vac, 250Vdc (See
Catalog Numbers table)
Amps: — 2-400A (See Catalog Numbers table)
— 63M80-400M500A Motor Starter ratings (See
Catalog Numbers table)
IR: — See Catalog Numbers table
Agency Information: CE, Meets the requirements of
BS 88 Parts 1 and 2 and IEC 60269-1.
Mounting: Center bolted blades, two-hole mount.
Basic Catalog Numbers
Basic Interr upting Max Voltage
Catalog Amp Ratings Ratings BS 88
Numbers Ratings AC DC AC DC Ref.
AC 2, 4, 6, 10, 16, 20, 25, 32 80kA 40kA 550 250 —
AD 2, 4, 6, 10, 16, 20, 25, 32 80kA 40kA 550 250 —
BC 40, 50, 63 80kA 40kA 550 250 —
63M80*, 63M100* 80kA — 550 — —
BD 40, 50, 63 80kA 40kA 550 250 —
CD 80, 100, 100M125*, 100M160*, 80kA — 415 — B1
100M200*, 100M200*
DD 125, 160, 200, 80kA — 415 — B2
200M250*, 200M315*
ED 250, 315, 355, 400, 315M400* 80kA — 415 — B3
400M500* 80kA — 550 — B4
EFS 125, 160, 200, 250, 315 80kA 415 — —
*“M” indicates motor starter ratings.
To Order
To order, specify Basic Catalog Number and amp rating. Example: BC-40
Recommended Fuse Blocks & Holder
Basic Fuse Block/Holder
Catalog Numbers Catalog Numbers
AC BH-0111 Modular fuse block
AD 200DF Fuse holder
BC BH-0111 Modular fuse block
BD 200DF Fuse holder
CD 200DF Fuse holder
DD 200DF Fuse holder
ED BH-1131 Modular fuse block
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa
226
BS 88 British Standard Low Voltage Fuses
IEC & British Standard Fuses
Data Sheets 4110 (AC), 4111 (AD), 4113 (BC), 4114 (BD),
4116 (CD), 4118 (DD), 4119 (ED) and 4121 (EFS) Data Sheets 4120 (EF), 4102 (FF), 4122 (FG), 4103 (GF), 4104
(GG) and 4108 (GH)
Basic Catalog Numbers
NZ01, NZ02 Type D0
Specifications
Description: Low voltage Neozed fuses
suitable for use on 250Vdc systems.
Dimensions: See Catalog Numbers table and
Dimensions illustration.
Construction: Ceramic body.
Ratings:
Volts: — 400Vac
Amps: — 2-63A
IR: — 100kA
Agency Information: CE
Catalog Numbers
Catalog Amp Dimension Color
Numbers Ratings “D” (mm) Code
2NZ01 2 11 Pink
4NZ01 4 11 Brown
6NZ01 6 11 Green
10NZ01 10 11 Red
16NZ01 16 11 Grey
20NZ02 20 15 Blue
25NZ02 25 15 Yellow
35NZ02 35 15 Black
50NZ02 50 15 White
63NZ02 63 15 Copper
Dimensions (mm)
D16, D27, D33, D125 Type D
Specifications
Description: DIN style Type D
low voltage fuses.
Dimensions: See Catalog
Numbers table and Dimensions
illustrations.
Construction: Ceramic body.
Ratings:
Volts: — 500Vac
Amps: — 2-100A
IR: — 100kA
Agency Information: CE, “D” type fuses complying with
DIN 49360 Part 2 and DIN 49515, operating class gL.
Catalog Numbers
Catalog Amp Dimension Color Figure
Numbers Ratings “D” (mm) Code Number
2D16 2 6 Pink
4D16 4 6 Brown
6D16 6 6 Green
10D16 10 8 Red 1
16D16 16 10 Grey
20D16 20 12 Blue
25D16 25 14 Yellow
2D27 2 6 Pink
4D27 4 6 Brown
6D27 6 6 Green
10D27 10 8 Red 2
16D27 16 10 Grey
20D27 20 12 Blue
25D27 25 14 Yellow
35D33 35 16 Black
50D33 50 18 White 3
63D33 63 20 Copper
80D125 80 5 Silver 4
100D125 100 7 Red
Additional Fuselinks: Quick acting fuselinks in body sized D16, D27, D33 and
D125 rated 2-100A. Reference number suffixed Q, i.e. 10D27Q. Voltage rating 500V.
Gauge rings and keys can also be supplied.
Dimensions (mm)
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 227
DIN Style Type D and Neozed Low Voltage Fuses
IEC &
British
Fuses
IEC & British Standard Fuses
Data Sheet: 4124
D
36
Data Sheet: 4124
Figure 1 Figure 2 Figure 3 Figure 4
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com
228
NH HRC Fuses
IEC & British Standard Fuses
___NHG___B
Specifications
Class: gG/gL
Description: DIN
square bodied, dual
indication industrial
fuses.
Construction: Steatite
insulator, corrosion-
proof (aluminum) metal
parts with full-contact,
silver-plated copper
blades.
Sizes: DIN 000 to 4.
Selectivity Ratio: 1:1.6 up to 500Vac.
Dimensions (mm)
Fuse a2bc
1c2De
1e2e3e4f
Size a1(max) a3a4(nom) (± 8) (nom) (nom) (max) (max) (max) (nom) (max)
000 78.5 ± 1.5 54 45 ± 1.5 49 ± 1.5 15 35 10 2 ± 0.5 41 21 16 6 8
00 78.5 ± 1.5 54 45 ± 1.5 49 ± 1.5 15 35 11 7.0 ± 0.5 48 30 25 6 15
0 125 ± 2.5 68 62 +3/-1.5 68 +1.5/-3 15 35 11 2.5 ± 0.5 48 30 25 6 15
01 135 ± 2.5 75 62 ± 2.5 68 ± 2.5 15 40 11 2.5 ± 0.5 48 30 25 6 15
1 135 ± 2.5 75 62 ± 2.5 68 ± 2.5 20 40 11 2.5 ± 0.5 53 52 25 6 15
02 150 ± 2.5 75 62 ± 2.5 68 ± 2.5 20 48 11 2.5 ± 0.5 53 52 25 6 15
2 150 ± 2.5 75 62 ± 2.5 68 ± 2.5 25 48 11 2.5 ± 0.5 61 60 25 6 15
03 150 ± 3 75 62 ± 2.5 68 ± 2.5 25 60 11 2.5 ± 0.5 61 60 25 6 15
3 150 ± 3 75 62 ± 2.5 68 ± 2.5 32 60 11 3.0 ± 0.5 75 70 25 6 18
4 200 84 80 90 50 85 11 3 120 87 — 8 30
Ratings:
Volts: — 500Vac/250Vdc
— 690Vac/250Vdc
Amps: — 2-1250A
IR: — 120kA
Frequency: — 50Hz
Operating Frequency: — 45-62Hz
Agency Information: IEC 60269, VDE0636, DIN 43620
Part 1 to 4, VDE Mark and CE.
Data Sheet 4173
Fuse Blocks Size
SB00-D 000-00
SB1-D 1*, 1
SB2-D 02, 2, 03, 3
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com 229
NH HRC Fuses
IEC &
British
Fuses
IEC & British Standard Fuses
Rated gG/gL Dual Indicator
Current Voltage Conducting Carton
500Vac / 250Vdc Size (Amps) Metal Gripping Lugs Quantity
2 2NHG000B 3
4 4NHG000B 3
6 6NHG000B 3
10 10NHG000B 3
16 16NHG000B 3
20 20NHG000B 3
25 25NHG000B 3
000 32 32NHG000B 3
35 35NHG000B 3
40 40NHG000B 3
50 50NHG000B 3
63 63NHG000B 3
80 80NHG000B 3
100 100NHG000B 3
00 125 125NHG00B 3
160 160NHG00B 3
10 10NHG0B 3
16 16NHG0B 3
20 20NHG0B 3
25 25NHG0B 3
32 32NHG0B 3
35 35NHG0B 3
0 40 40NHG0B 3
50 50NHG0B 3
63 63NHG0B 3
80 80NHG0B 3
100 100NHG0B 3
125 125NHG0B 3
160 160NHG0B 3
10 10NHG01B 3
16 16NHG01B 3
20 20NHG01B 3
25 25NHG01B 3
32 32NHG01B 3
35 35NHG01B 3
01 40 40NHG01B 3
50 50NHG01B 3
63 63NHG01B 3
80 80NHG01B 3
100 100NHG01B 3
125 125NHG01B 3
160 160NHG01B 3
200 200NHG1B 3
1 224 224NHG1B 3
250 250NHG1B 3
35 35NHG02B 3
40 40NHG02B 3
50 50NHG02B 3
63 63NHG02B 3
80 80NHG02B 3
02 100 100NHG02B 3
125 125NHG02B 3
160 160NHG02B 3
200 200NHG02B 3
224 224NHG02B 3
250 250NHG02B 3
315 315NHG2B 3
2 355 355NHG2B 3
400 400NHG2B 3
250 250NHG03B 3
315 315NHG03B 3
03 355 355NHG03B 3
400 400NHG03B 3
3 500 500NHG3B 3
630 630NHG3B 3
500 500NHG4G 1
4 630 630NHG4G 1
Single Indicator 800 800NHG4G 1
Slotted End 1000 1000NHG4G 1
Tags 1250 1250NHG4G 1
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com
230
IEC & British Standard Fuses
NH HRC Fuses
Rated gG/gL Dual Indicator
Current Voltage Conducting Carton
690Vac / 250Vdc Size (Amps) Metal Gripping Lugs Quantity
2 2NHG000B-690 3
4 4NHG000B-690 3
6 6NHG000B-690 3
10 10NHG000B-690 3
000 16 16NHG000B-690 3
20 20NHG000B-690 3
25 25NHG000B-690 3
32 32NHG000B-690 3
35 35NHG000B-690 3
40 40NHG000B-690 3
50 50NHG00B-690 3
00 63 63NHG00B-690 3
80 80NHG00B-690 3
100 100NHG00B-690 3
6 6NHG0B-690 3
10 10NHG0B-690 3
16 16NHG0B-690 3
20 20NHG0B-690 3
25 25NHG0B-690 3
0 32 32NHG0B-690 3
35 35NHG0B-690 3
40 40NHG0B-690 3
50 50NHG0B-690 3
63 63NHG0B-690 3
80 80NHG0B-690 3
100 100NHG0B-690 3
50 50NHG1B-690 3
63 63NHG1B-690 3
80 80NHG1B-690 3
1 100 100NHG1B-690 3
125 125NHG1B-690 3
160 160NHG1B-690 3
200 200NHG1B-690 3
63 63NHG2B-690 3
80 80NHG2B-690 3
100 100NHG2B-690 3
125 125NHG2B-690 3
2 160 160NHG2B-690 3
200 200NHG2B-690 3
224 224NHG2B-690 3
250 250NHG2B-690 3
315 315NHG2B-690 3
250 250NHG3B-690 3
315 315NHG3B-690 3
3 355 355NHG3B-690 3
400 400NHG3B-690 3
425 425NHG3B-690 3
500 500NHG3B-690 3
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com 231
NH Fuse Bases
IEC &
British
Fuses
IEC & British Standard Fuses
SB*-D, SB*-S
Up to 690V / 160 - 1250A
Sizes 00, 0, 1, 2, 3, 4
Description: NH fuse bases with thermoplastic
bodies. DIN rail and screw mounting (size 4 screw
fix). Range of protection accesories for live parts in
order to obtain IP20 protection standard.
Ratings:
• Voltage: up to 690Vac
• Amps: 2 to 1250A
Applications: Protection of industrial circuits and
electrical apparatus
Standards and Approvals: IEC 60269, DIN 43620
Par t Numbers
Size Poles Current
(Amps)
Part Numbers Carton
Quantity Compatible
Fuse Size
DIN Screw
00 1
3160A SB00-D
TB00-D
TB00-D-IP20
3
1000 & 00
01
3160A SB0-D
TB0-D 3
10
11
3250A SB1-D
TB1-D 3
101 & 1
21
3400A SB2-D
TB2-D 3
102 & 2
31
3630A SB3-D
TB3-D 3
103 & 3
4 1 1250A SB4-S (Screw
Connection only) 3 4
Neutral
Size Current
(Amps) Part Ref Carton
Quantity
NH00 160 SL00
3
NH0 160 SL0
NH1 250 SL1
NH2 400 SL2
NH3 630 SL3
NH4 1000 SL4
Size Part Ref Carton
Quantity
C00-3 FEH 1
Fuse extraction handle
Protection accessories
Size Current
(Amps)
Separation Partition
4
Fuse Casing
5
Terminal Cover
1
Separator
3
Part
Ref
Carton
Quantity
Part
Ref
Carton
Quantity
Part
Ref
Carton
Quantity
Part
Ref
Carton
Quantity
NH00*
NH0
NH1
NH2
NH3
160A
160A
250A
400A
630A
SP00*
SP0
SP1-2
SP1-2
SP3
2
2
2
2
2
FC00*
FC0
FC1-2
FC1-2
FC3
3
3
3
3
3
CS00*
CS0
CS1
CS2
CS3
6
6
6
6
6
BC00*
BC0
BC1-2
BC1-2
BC3
2
2
2
2
2
IP Protection Kits
Part Reference Description
TB00-D-IP20 Complete triple pole fuse base IP20 rated
FPK0-3P IP20 kit for TB0-D fuse base
FPK1-3P IP20 kit for TB1-D fuse base
FPK2-3P IP20 kit for TB2-D fuse base
FPK3-3P IP20 kit for TB3-D fuse base
Part Ref Carton Quantity
BVL-50 1
Microswitch
Microswitch suitable for the following NH Fuse links:
- 400 Volts gG/gL
- 500 Volts gG/gL and aM
- 690 Volts gG/gL and aM
* For single pole only
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com
232
IEC & British Standard Fuses
Class gG/gL IEC 60269 Industrial Fer rule Fuses
8 x 31mm: 400Vac, 0.5 - 25A
10 x 38mm: 500Vac, 0.5 - 32A
14 x 51mm: 400Vac - 500Vac - 690Vac, 1 - 50A
22 x 58mm: 400Vac - 500Vac - 690Vac, 2 - 125A
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com 233
Class aM IEC Industrial Fer rule Fuses - Class aM IEC
60269
IEC &
British
Fuses
IEC & British Standard Fuses
8 x 31mm: 400Vac, 1 - 8A
10 x 38mm: 400Vac - 550Vac, 0.16 - 25A
14 x 51mm: 690Vac - 500Vac, 0.25 - 50A
22 x 58mm: 400Vac - 500Vac - 690Vac, 2 - 125A
Neutral Links
For detailed informa tion, visit the Electrical IEC section at www.cooperbussmann.com
234
IEC & British Standard Fuses
Class aM & gG/gL IEC Industrial Fer rule Fuses with
Striker Class gG/gL with Striker
Catalog Number Amp Watts Loss Voltage Interrupting
With Striker Rating (W) (AC) Rating (kA)
C14G2S 2 0.24 500 120
C14G4S 4 0.45
C14G6S 6 0.42
C14G8S 8 0.70
C14G10S 10 0.53
C14G12S 12 0.88
C14G16S 16 1.16
C14G20S 20 1.23
C14G25S 25 1.46
C14G32S 32 2.04
C14G40S 40 3.34
C14G50S 50 3.04 400
Catalog Number Amp Watts Loss Voltage Interrupting
With Striker Rating (W) (AC) Rating (kA)
C22G4S 4 0.48 690 80
C22G6S 6 0.47
C22G8S 8 0.73
C22G10S 10 0.74
C22G12S 12 0.83
C22G16S 16 1.21
C22G20S 20 1.29
C22G25S 25 1.53
C22G32S 32 2.13
C22G40S 40 3.40
C22G50S 50 3.48
C22G63S 63 4.46
C22G80S 80 5.86 500 120
C22G100S 100 6.61
C22G125S 125 8.42 400
Class aM with Striker
Catalog Number Amp Watts Loss Voltage Interrupting
With Striker Rating (W) (AC) Rating (kA)
C14M1S 1 0.14 500 120
C14M2S 2 0.24
C14M4S 4 0.45
C14M6S 6 0.42
C14M8S 8 0.70
C14M10S 10 0.53
C14M12S 12 0.88
C14M16S 16 1.16
C14M20S 20 1.23
C14M25S 25 1.46
C14M32S 32 2.04
C14M40S 40 3.34
C14M50S 50 3.04 400
Catalog Number Amp Watts Loss Voltage Interrupting
With Striker Rating (W) (AC) Rating (kA)
C22M2S 2 0.29 690 80
C22M4S 4 0.48
C22M6S 6 0.47
C22M8S 8 0.73
C22M10S 10 0.74
C22M12S 12 0.83
C22M16S 16 1.21
C22M20S 20 1.29
C22M25S 25 1.53
C22M32S 32 2.13
C22M40S 40 3.40
C22M50S 50 3.48
C22M63S 63 4.46
C22M80S 80 5.86 500 120
C22M100S 100 6.61
C22M125S 125 8.42 400
14 X 51
22 X 58
14 X 51
22 X 58
500 120
80
120
690
500
500 120
80
120
690
500
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 235
IEC &
British
Fuses
IEC & British Standard Fuses
SAFEloc
Specifications
Catalog
Symbol:
See table below.
Description: The
SAFEloc HRC
fuse holders (for
use with HRCI-CB
fuses) provides a
positive, stress-
free fuse fitting
and locks it in position to ensure safe insertion and
withdrawal from the base. Base contacts are fully shrouded
to help protect against electric shock. Shrouds utilize
simple slide/snap action allowing access to the contact
terminal screws.
Ratings:
Volts: — 600V
Amps: — 30-60A (See Catalog Number table for details)
Agency Information: CE, Designed to accommodate the
compact range of offset blade fuse to CSA C22.2 No. 106,
HRCI-CB.
Mounting: 35mm DIN rail or single screw mounting.
Catalog Numbers*
Catalog Amp Fuse
Numbers Ratings Connection Accepted
C30F Front _CIF06
C30BS 30 Back
C30FBS Front-Back
C60F Front EK-Amp
C60BS 60 Back
C60FBS Front-Back
*For use with HRCI-CB Fuses.
CAMaster
Specifications
Catalog Symbol:
See table below.
Description: The
CAMaster HRC fuse holder
features a unique
cam-action for easy fuse
removal while allowing
significantly improved
contact pressure between
fuse carrier and base
contact that enhances
electrical performance. A range of lockable safety carriers for
the fuse holder (catalog reference: LSC), are available.
Ratings:
Volts: — 690V
Amps: — 30-100A (See Catalog Number table for details)
Agency Information: CE, CSA C22.2 No. 39; IEC 269
AND BS 88.
Mounting: 35mm DIN-rail or single screw mounting.
Catalog Numbers
Catalog Amp Fuse
Numbers Ratings Details For: Accepted
CM20CF 30 HRCI-CA Applications _CIF21
CM30CF 30 _H07C
CM60CF 60 HRCII Applications _K07C
CM100CF 100 _K07CR
Accessor y Catalog Numbers for CAMaster Units
Catalog Amp Fuse Holder
Numbers Ratings Details Accepted
20BS 30 CM20CF
32BS 30 Back Stud CM30CF
60/100BS 60/100 CM60/100CF
GLP All Ganging Link Kit 3-Pole
NI All 660V Neon Indicator —
20LSC 30 CM20CF
30LSC 30 Security Carrier with Clip CM30CF
60/100LSC 60/100A CM60/100CF
HRC Fuse Holders
Data Sheet: 4132 Data Sheet: 4133
236
