3.2 x 2.5 mm TCVCXO Description: T106A Series Features: * The T106A Analog Temperature Compensated Voltage Controllable Crystal Oscillator (TCVCXO) offers a wide range of performance options in miniature 3.2 x 2.5 mm ceramic SMD package. * * * * * The compact light weight package make this part ideal for automated assembly applications. * Available in frequencies from 10 to 52 MHz. with 16.368MHz, 16.369MHz, 19.2 MHz, 20MHz, 26MHz, and 40 MHz standards. Contact the factory for other standard frequencies. +/-5ppm pull range available Clipped Sine Wave output Standard 3.2 x 2.5 mm ceramic SMD package External VCC bypass capacitor required Analog Frequency vs. Temperature Compensation technique for precision applications. RoHS-6 Lead-free compliant Frequency Range, Operating Temperature, and Frequency Stability: Frequency Range 10MHz to 52MHz Operating Temperature -20 to +70 C -40 to +85 C 0 to +55 C -10 to +60 C -30 to +85 C Product Code C D E F G Frequency Stability +/- 0.5 ppm +/- 1.0 ppm +/- 1.5 ppm +/- 2.0 ppm +/- 2.5 ppm Product Code A B C D E Not all combinations of frequency vs. temperature stabilities available. Please consult factory for your specific requirements. Aging: (typical at 10 MHz after 30 days continuous operation) Frequency 10 MHz Timeframe 1st Year Aging +/- 1.0 ppm Phase Noise: Frequency 19.2 MHz Offset 1 Hz 10 Hz 100 Hz 1 KHz Phase Noise (Typ.) - 60 dBc/Hz - 85 dBc/Hz -115 dBc/Hz -135 dBc/Hz 10 KHz 100 KHz -148 dBc/Hz -150 dBc/Hz Supply Voltage (Vs): Power Supply (Vs) Product Code www.bliley.com +2.5 Vdc +/-10% C +3.3 Vdc +/-10% D 2545 West Grandview Blvd Erie, PA. 16506 Page 1 of 2 Tel (814) 838-3571 Rev 1.1 3.2 x 2.5 mm TCVCXO T106A Series Current Consumption: Freq Range Supply Current 15MHz 26MHz 26MHz - 40MHz 2.0mA 2.5 mA Output Waveform: Clipped Sine Wave Product Code N/A Output Level 0.8 V p-p min. Load 10K // 10 pF Pulling Range: Tuning None(TCXO) +/-5 ppm Range Product T A (Pin 1 - Ground) Code Environmental: Storage Temperature -55 to +125 C Ordering Options: Operating Frequency Supply Temperature Stability Voltage C A C D B D E C F D G E T106A C B Pulling Range T A Operating Frequency (MHz) xxMxxxx xxMxxxx xxMxxxx xxMxxxx xxMxxxx C A 15.0000 MHz Product Selection Code (refer to the above example): This part is RoHs compliant, -20 to +70C, +/- 1.0pm, 2.5 volt clipped sine wave with +/- 5 ppm pull at 15MHz output frequency. ** Not all combinations available in this product www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Page 2 of 2 Tel (814) 838-3571 Rev 1.1