F-219 (Rev 03JAN19) UPS-08-04.0-01-L-V POWERTM STRIP 20 UPS-04-01-01-L-RA-LC UPS-04-07.0-03-L-PV (3.81 mm) .150" UPS SERIES DUAL LEAF 20 A POWER SOCKET Dual leaf blade contacts Mates with: UPT SPECIFICATIONS Up to 8 power pins For complete specifications see www.samtec.com?UPS Insulator Material: Black LCP Contact Material: BeCu Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold Voltage Rating: 438 VAC/620 VDC Standard Creepage: (5.8 mm) .228" (with -V) (2.97 mm) .117" (with -RA) Standard Clearance: (1.51 mm) .059" RoHS Compliant: Yes Lead-Free Solderable: Yes UPT-V/UPS-V UPT-RA/UPS-RA CURRENT CURRENT PINS RATING RATING (PER CONTACT) (PER CONTACT) 1 23 A 23.5 A 2 18.6 A 20.1 A 3 17.5 A 16.9 A 4 16.7 A 15.5 A 8 14 A 13.3 A -L PLATING Optional locking clip (3.81 mm) .150" pitch Vertical, right-angle or press-fit RECOGNITIONS * Locking clip option For complete scope of recognitions see www.samtec.com/quality POWER PINS UPS LEAD STYLE TAIL LENGTH PLATING OPTION OTHER OPTION TAIL FILE NO. E111594 -01 -02, -04, -06, -08 CREEPAGE AND CLEARANCE = RA only -04.0 = (04.0 mm) .157" (-V & -PV only) -07.0 Selectively loading contacts achieves customer specific creepage and clearance requirements. Contact asp@samtec.com LEAD STYLE A B -04.0 (3.75) .148 (6.75) .266 (6.75) .266 (9.75) .384 -07.0 = (07.0 mm) .276" (-V & -PV only) (MOQ Required) * Solder leads for (2.36 mm) .093" thick board TOOLING -PV (3.81) .150 (2.00) .0787 (0.30) .012 B (1.00) .039 DIA = Locking Clip (Manual placement required) Not available with -PV option -RA -T = Rightangle = Matte Tin (-RA option only) -PV MATED HEIGHT* No. of power pins x (3.81) .150 + (6.76) .266 (9.74) .384 (12.74) .502 (2.00) .0787 (1.50) .059 -V UPT LEAD STYLE -04.0 -07.0 (7.00) .276 (10.00) .394 -03.0 *Processing conditions will affect mated height. (5.00) .197 (8.00) .315 (2.00) .0787 (2.82) .111 (1.54) .061 (0.30) .012 -RA Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM UPS LEAD STYLE (3.81) .150 (3.00) .118 A -LC -V = Vertical (Not available with -T plating) = Pressfit, Vertical (7.00) .276 (1.25) .049 -L = 10 " (0.25 m) Gold on contact, Matte Tin on tail (0.78) .031 No. of power pins x (3.81) .150 + (6.76) .266 (5.00) .197 Note: Some sizes, styles and options are non-standard, non-returnable. -03 = Use with (1.60 mm) .062" Thick PCB (-PV only) (2.20) .087 ALSO AVAILABLE Press-fit tooling available. -01 = Use with (1.60 mm) .062" Thick PCB (-V & -RA only) All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (1.50) .059