119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 1Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Electrolytic Capacitors
Axial High Temperature, DIN-Based
Fig. 1
FEATURES
• Extra long useful life: up to 8000 h at 125 °C
• High stability, high reliability
• Extended temperature range: 125 °C (usable up
to 150 °C)
• High ripple current capability
• Taped versions up to case Ø 15 mm x 30 mm available for
automatic insertion
• Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Axial leads, cylindrical aluminum case, insulated with a
blue sleeve
• Mounting ring version not available in insulated form
• Charge and discharge proof
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Military, industrial control, EDP and telecommunication
• Smoothing, filtering, buffering in SMPS; coupling,
decoupling
• For use where low mounting height is important; vibration
and shock resistant
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (T for -10 % to +50 %)
• Rated voltage (in V) at 125 °C and 85 °C
• Date code, in accordance with IEC 60062
• Code for factory of origin
• Name of manufacturer
• Negative terminal identification
• Series number (119)
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes
(Ø D x L in mm)
6.5 x 18
to 10 x 25
10 x 30
to 21 x 38
Rated capacitance range, CR4.7 μF to 4700 μF
Tolerance on CR-10 % / +50 %
Rated voltage range, UR10 V to 100 V
Category temperature range -55 °C to +125 °C
Endurance test at 150 °C 500 h 500 h
Endurance test at 125 °C 2000 h 4000 h
Useful life at 125 °C 4000 h 8000 h
Useful life at 40 °C,
1.8 x IR applied 500 000 h 1 000 000 h
Shelf life at 0 V, 125 °C:
UR = 10 V to 63 V 500 h
UR = 100 V 100 h
Based on sectional
specification IEC 60384-4 / EN 130300
Climatic category IEC 60068 55 / 125 / 56
smaller
dimensions
smaller dimensions
higher ripple
119 AHT-DIN
125 °C
118 AHT
120 ATC
125 °C
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
10 16 25 40 63 100
4.7 - - - - - 6.5 x 18
10 - - - - 6.5 x 18 -
22 - - 6.5 x 18 - 8 x 18 -
47 - 6.5 x 18 - 8 x 18 10 x 18 10 x 25
-----10 x 30
68 - - - - 10 x 30 12.5 x 30
100 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 15 x 30
150 - - - 12.5 x 30 15 x 30 15 x 30
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 2Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Forms BA and BR Fig. 3 - Form AA
Table 1
Note
• For detailed tape dimensions please see www.vishay.com/doc?28361
220 10 x 18 10 x 25 10 x 25 12.5 x 30 15 x 30 18 x 30
- - 12.5 x 30 - - -
330 - 12.5 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38
470 10 x 25 12.5 x 30 12.5 x 30 15 x 30 18 x 38 21 x 38
12.5 x 30 - - - - -
680 12.5 x 30 15 x 30 18 x 30 18 x 30 21 x 38 -
1000 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 -
1500 18 x 30 18 x 30 18 x 38 21 x 38 - -
2200 18 x 30 18 x 38 21 x 38 21 x 38 - -
3300 18 x 38 21 x 38 - - - -
4700 21 x 38 21 x 38 - - - -
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
10 16 25 40 63 100
73 ± 1.6
Ø D
Ø d
L
F
Form BR: Taped on reel
Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm
Form BA: Taped in box (ammopack)
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
Form AA: Axial in box
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
33 ± 1
Ø D
Ø d
IL
F
AXIAL; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
AXIAL FORM AA, BA, AND BR MASS
(g)
PACKAGING QUANTITIES
Ø d I Ø Dmax. Lmax. Fmin. FORM
AA
FORM
BA
FORM
BR
6.5 x 18 4 0.8 - 6.9 18.5 25 1.3 - 1000 1000
8 x 18 5 0.8 - 8.5 18.5 25 1.7 - 500 500
10 x 18 6 0.8 - 10.5 18.5 25 2.5 - 500 500
10 x 25 7 0.8 - 10.5 25.5 30 3.3 - 500 500
10 x 30 00 0.8 55 ± 1 10.5 30.5 35 4.8 340 - 500
12.5 x 30 01 0.8 55 ± 1 13.0 30.5 35 7.4 260 - 400
15 x 30 02 0.8 55 ± 1 15.5 30.5 35 11.7 200 - 250
18 x 30 03 0.8 55 ± 1 18.5 30.5 35 12.9 120 - -
18 x 38 04 0.8 34 ± 1 18.5 39.5 44 19.0 125 - -
21 x 38 05 0.8 34 ± 1 21.5 39.5 44 24.0 100 - -
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 3Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 4 - Mounting hole diagram and outline; form MR: With mounting ring and pins
Table 2
Note
• Unless otherwise specified, all electrical values in Table 3 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ORDERING EXAMPLE
Electrolytic capacitor 119 series
470 μF / 16 V; -10 % / +50 %
Nominal case size: Ø 12.5 mm x 30 mm; form BR
Ordering code: MAL211925471E3
Former 12NC: 2222 119 25471
MOUNTING RING; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
MOUNTING RING: FORM MR MASS
(g)
PACKAGING
QUANTITIES
Ø d1 Ø d2 Ø Dmax. Ø D2max. D3 Lmax.
15 x 30 02 0.8 1.0 + 0.4 15.5 17.5 16.5 ± 0.2 33 8.6 200
18 x 30 03 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 33 11.5 240
18 x 38 04 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 42 14.0 100
21 x 38 05 0.8 1.0 + 0.4 21.5 22.5 21.5 ± 0.2 42 19.2 100
D3
120 °C
(3 x)
d2
-
1.3 + 0.1
0(3 x)
1.05 + 0.03
- 0.1
3.6 + 0.2
- 0.2
(3 x)
1.3 + 0
(3 x)
Mounting holes
90° ± 2°
(3 x)
- 0.05
Case Ø D x L = 15 mm x 30 mm to 21 mm x 38 mm
Especially for applications with severe shocks and vibrations
Ø d1
D
L
Ø D2
1+ 1.0
- 0.5
ELECTRICAL DATA
SYMBOL DESCRIPTION
CR Rated capacitance at 100 Hz, tolerance -10 % / +50 %
IRRated RMS ripple current at 100 Hz, 125 °C
IL1 Max. leakage current after 1 min at UR
IL5 Max. leakage current after 5 min at UR
tan Max. dissipation factor at 100 Hz
ESR Equivalent series resistance at 100 Hz
(calculated from tan max. and CR)
Z Max. impedance at 10 kHz
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 4Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 3
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
CASE
CODE
IR
100 Hz
125 °C
(mA)
IL1
1 min
(μA)
IL5
5 min
(μa)
tan
100 Hz
ESR
100 Hz
()
Z
10 kHz
()
ORDERING CODE MAL2119.......
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING
RING
FORM MR
10
100 6.5 x 18 4 130 10 6 0.20 3.50 2.20 - 24101E3 34101E3 -
220 10 x 18 6 240 17 8.4 0.18 1.30 1.00 - 24221E3 34221E3 -
470 10 x 25 7 380 32 13 0.18 0.61 0.49 - 90501E3 90502E3 -
470 12.5 x 30 01 550 32 13 0.16 0.54 0.38 14471E3 24471E3 - -
680 12.5 x 30 01 640 45 18 0.20 0.47 0.38 14681E3 24681E3 - -
1000 15 x 30 02 830 64 24 0.20 0.32 0.24 14102E3 24102E3 - 44102E3
1500 18 x 30 03 1100 94 34 0.22 0.23 0.17 14152E3 - - 44152E3
2200 18 x 30 03 1190 136 48 0.26 0.19 0.17 14222E3 - - 44222E3
3300 18 x 38 04 1550 202 70 0.27 0.13 0.10 14332E3 - - 44332E3
4700 21 x 38 05 1700 286 90 0.30 0.10 0.09 14472E3 - - 44472E3
16
47 6.5 x 18 4 110 10 5.5 0.13 4.40 2.20 - 25479E3 35479E3 -
100 8 x 18 5 170 14 7.2 0.13 2.10 1.30 - 25101E3 35101E3 -
220 10 x 25 7 300 25 11 0.13 0.94 0.55 - 25221E3 35221E3 -
330 12.5 x 30 01 560 36 15 0.13 0.63 0.38 15331E3 25331E3 - -
470 12.5 x 30 01 570 50 19 0.15 0.51 0.38 15471E3 25471E3 - -
680 15 x 30 02 750 69 26 0.15 0.35 0.24 15681E3 25681E3 - 45681E3
1000 15 x 30 02 850 100 36 0.19 0.30 0.24 15102E3 25102E3 - 45102E3
1500 18 x 30 03 1120 148 52 0.20 0.21 0.17 15152E3 - - 45152E3
2200 18 x 38 04 1440 215 74 0.20 0.14 0.10 15222E3 - - 45222E3
3300 21 x 38 05 1650 321 110 0.22 0.11 0.09 15332E3 - - 45332E3
4700 21 x 38 05 1710 455 154 0.28 0.09 0.09 15472E3 - - 45472E3
25
22 6.5 x 18 4 85 10 5.1 0.10 7.20 3.20 - 26229E3 36229E3 -
100 10 x 18 6 210 19 9 0.10 1.60 1.00 - 26101E3 36101E3 -
220 10 x 25 7 350 37 15 0.10 0.72 0.58 - 90503E3 90504E3 -
220 12.5 x 30 01 500 37 15 0.09 0.65 0.38 16221E3 26221E3 - -
330 12.5 x 30 01 580 54 21 0.11 0.53 0.38 16331E3 26331E3 - -
470 12.5 x 30 01 630 75 28 0.13 0.44 0.38 16471E3 26471E3 - -
680 18 x 30 03 990 106 38 0.13 0.30 0.17 16681E3 - - 46681E3
1000 18 x 30 03 1090 154 54 0.13 0.21 0.17 16102E3 - - 46102E3
1500 18 x 38 04 1420 229 79 0.13 0.14 0.10 16152E3 - - 46152E3
2200 21 x 38 05 1550 334 114 0.13 0.11 0.09 16222E3 - - 46222E3
40
47 8 x 18 5 150 15 7.8 0.08 2.70 1.50 - 27479E3 37479E3 -
100 10 x 25 7 260 28 12 0.08 1.30 0.70 - 27101E3 37101E3 -
150 12.5 x 30 01 440 40 16 0.08 0.85 0.51 17151E3 27151E3 - -
220 12.5 x 30 01 500 57 22 0.09 0.65 0.48 17221E3 27221E3 - -
330 15 x 30 02 630 83 30 0.09 0.43 0.37 17331E3 27331E3 - 47331E3
470 15 x 30 02 720 117 42 0.12 0.41 0.37 17471E3 27471E3 - 47471E3
680 18 x 30 03 970 167 58 0.12 0.28 0.22 17681E3 - - 47681E3
1000 18 x 38 04 1250 244 84 0.12 0.19 0.14 17102E3 - - 47102E3
1500 21 x 38 05 1410 364 124 0.14 0.15 0.12 17152E3 - - 47152E3
2200 21 x 38 05 1550 532 180 0.18 0.13 0.11 17222E3 - - 47222E3
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 5Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
63
10 6.5 x 18 4 68 20 5.3 0.07 11.0 5.60 - 28109E3 38109E3 -
22 8 x 18 5 110 20 6.7 0.07 5.10 2.80 - 28229E3 38229E3 -
47 10 x 18 6 180 22 9.9 0.07 2.40 1.30 - 28479E3 38479E3 -
68 10 x 25 7 230 30 13 0.07 1.60 1.00 - 90505E3 90506E3 -
68 10 x 30 00 300 30 13 0.07 1.60 0.92 18689E3 28689E3 - -
100 10 x 30 00 360 42 17 0.08 1.30 0.75 18101E3 28101E3 - -
150 15 x 30 02 560 61 23 0.08 0.85 0.37 18151E3 28151E3 - 48151E3
220 15 x 30 02 640 87 32 0.08 0.58 0.37 18221E3 28221E3 - 48221E3
330 18 x 30 03 880 129 46 0.09 0.43 0.23 18331E3 - - 48331E3
470 18 x 38 04 1130 182 63 0.09 0.30 0.15 18471E3 - - 48471E3
680 21 x 38 05 1290 261 90 0.09 0.21 0.12 18681E3 - - 48681E3
1000 21 x 38 05 1430 382 130 0.10 0.16 0.11 18102E3 - - 48102E3
100
4.7 6.5 x 18 4 44 20 10 0.08 27.00 10.0 - 29478E3 39478E3 -
47 10 x 25 7 178 32 13 0.08 2.70 2.00 - 90518E3 90519E3 -
47 10 x 30 00 240 32 13 0.08 2.70 2.00 19479E3 29479E3 - -
68 12.5 x 30 01 330 45 18 0.08 1.90 1.20 19689E3 29689E3 - -
100 15 x 30 02 440 64 24 0.09 1.40 0.96 19101E3 29101E3 - 49101E3
150 15 x 30 02 520 94 34 0.10 1.10 0.78 19151E3 29151E3 - 49151E3
220 18 x 30 03 710 136 48 0.10 0.72 0.55 19221E3 - - 49221E3
330 18 x 38 04 920 202 70 0.10 0.48 0.37 19331E3 - - 49331E3
470 21 x 38 05 1070 286 98 0.10 0.34 0.28 19471E3 - - 49471E3
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
AXIAL MOUNTING RING
Voltage
Surge voltage Us 1.15 x UR
Reverse voltage Urev 1 V
Current
Leakage current
After 1 min:
UR = 10 V to 40 V IL1 0. 006 CR x UR + 4 μA, or 10 μA
(whichever is greater)
UR = 63 V to 100 V IL1 0. 006 CR x UR + 4 μA, or 20 μA
(whichever is greater)
After 5 min:
UR = 10 V to 63 V IL5 0. 002 CR x UR + 4 μA
UR = 100 V IL5 0. 002 CR x UR + 4 μA, or 10 μA
(whichever is greater)
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
CASE
CODE
IR
100 Hz
125 °C
(mA)
IL1
1 min
(μA)
IL5
5 min
(μa)
tan
100 Hz
ESR
100 Hz
()
Z
10 kHz
()
ORDERING CODE MAL2119.......
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING
RING
FORM MR
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 6Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 4
Note
• For applications at ambient temperatures of 85 °C, the rated voltage (UR) may be raised to UR2.
CAPACITANCE (C)
Fig. 5 - Typical multiplier of capacitance
as a function of ambient temperature
Fig. 6 - Typical multiplier of capacitance
as a function of ambient temperature
Inductance
Equivalent series inductance (ESL)
Case Ø D x L mm:
6.5 x 18 Typ. 15 nH -
8 x 18 Typ. 35 nH -
10 x 18 Typ. 69 nH -
10 x 25 Typ. 38 nH -
10 x 30 Typ. 38 nH -
12.5 x 30 Typ. 46 nH -
15 x 30 Typ. 48 nH Typ. 39 nH
18 x 30 Typ. 50 nH Typ. 39 nH
18 x 38 Typ. 54 nH Typ. 39 nH
21 x 38 Typ. 59 nH Typ. 39 nH
UPRATING VALUES AT REDUCED AMBIENT TEMPERATURE
SYMBOL CONDITIONS VALUES UNIT
URTamb > 85 °C to 125 °C 10 16 25 40 63 100 V
UR2 Tamb 85 °C 16 25 40 63 100 125
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
AXIAL MOUNTING RING
0.6
0.7
0.8
0.9
1.0
1.1
1.2
2
3
C
0
C
1
3
2
1
C0 = Capacitance at 20 °C, 100 Hz
- 60 - 40 - 20 0 20 40 60 80 100 120 140 160
Tamb (°C)
Curve 1: 63 V to 100 V
Curve 2: 25 V; 40 V
Curve 3: 10 V; 16 V
C0 = Capacitance at 20 °C, 100 Hz
0.5
104
103
102
10 f (Hz)
0.6
0.7
0.8
0.9
1.0
1.1
1
5
C
0
C
1
2
3
4
5
Curve 1: 63 V to 100 V
Curve 2: 40 V
Curve 3: 25 V
Curve 4: 16 V
Curve 5: 10 V
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 7Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EQUIVALENT SERIES RESISTANCE (ESR)
Fig. 7 - Typical multiplier of ESR
as a function of ambient temperature
Fig. 8 - Typical multiplier of ESR
as a function of ambient temperature
Fig. 9 - Typical multiplier of ESR as a function of frequency Fig. 10 - Typical multiplier of ESR as a function of frequency
IMPEDANCE (Z)
Fig. 11 - Typical impedance as a function of frequency Fig. 12 - Typical impedance as a function of frequency
015050 100
1
10
- 50- 100
ESR0
ESR
102
10 -1
1
2
1
2
Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm
ESR0 = Typical at 20 °C, 100 Hz
Curve 1: 25 V to 100 V
Curve 2: 10 V; 16 V
0 15050 100
1
10
- 50- 100
ESR0
ESR
102
10 -1
Case Ø D x L = 18 mm x 30 mm to 21 mm x 38 mm
ESR0 = Typical at 20 °C, 100 Hz
1
2
1
2
Curve 1: 25 V to 100 V
Curve 2: 10 V; 16 V
ESR0
ESR
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
ESR0 = Typical at 20 °C, 100 Hz
0
105
104
103
102
10 f (Hz)
0.4
0.8
1.2
1.6
2.0
3
2
1
1
3
2
Curve 1: 63 V and 100 V
Curve 2: 25 V; 40 V
Curve 3: 10 V; 16 V
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
ESR0 = Typical at 20 °C, 100 Hz
105
104
103
102
10 f (Hz)
0
0.2
0.4
0.6
0.8
1.4
ESR0
ESR
1.2
1.0
1
2
3
2
1
3
Curve 1: 10 V
Curve 2: 16 V; 25 V
Curve 3: 40 V to 100 V
f (Hz)
106
105
104
103
102
10 107
103
102
10
1
Z
( )
Ω
1
2
3
10-1
Case Ø D x L = 8 mm x 18 mm
Curve 1: 22 µF
Curve 2: 47 µF
Curve 3: 100 µF
Tamb (°C)
f (Hz)
106
105
104
103
102
10 107
103
102
10
1
Z
( )
Ω
10-1
Case Ø D x L = 8 mm x 18 mm
1
2
3
Curve 1: 100 µF
Curve 2: 220 µF
Curve 3: 470 µF
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 8Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IMPEDANCE (Z)
Fig. 13 - Typical impedance as a function of frequency Fig. 14 - Typical impedance as a function of frequency
Fig. 15 - Typical impedance as a function of frequency Fig. 16 - Typical impedance as a function of frequency
Tamb 40 °C
f (Hz)
106
105
104
103
102
10 107
103
102
10
1
Z
( )
Ω
10-1
Case Ø D x L = 12.5 mm x 30 mm
1
2
3
4
5
Curve 1: 150 µF; 40 V
Curve 2: 220 µF; 40 V; 25 V
Curve 3: 330 µF; 25 V; 16 V
Curve 4: 470 µF; 25 V; 16 V; 10 V
Curve 5: 680 µF; 10 V
Tamb 20 °C
f (Hz)
106
105
104
103
102
10 107
103
102
10
1
Z
( )
Ω
10-1
Case Ø D x L = 18 mm x 30 mm
1
2
3
4
5
Curve 1: 150 µF; 40 V
Curve 2: 220 µF; 40 V; 25 V
Curve 3: 330 µF; 25 V; 16 V
Curve 4: 470 µF; 25 V; 16 V; 10 V
Curve 5: 680 µF; 10 V
Tamb 20 °C
f (Hz)
106
105
104
103
102
10 107
103
102
10
1
Z
( )
Ω
10-1
Case Ø D x L = 12.5 mm x 30 mm
2
1
3
5
4
Curve 1: 150 µF; 40 V
Curve 2: 220 µF; 40 V; 25 V
Curve 3: 330 µF; 25 V; 16 V
Curve 4: 470 µF; 25 V; 16 V; 10 V
Curve 5: 680 µF; 10 V
Tamb 20 °C
f (Hz)
106
105
104
103
102
10 107
Case Ø D x L = 18 mm x 30 mm
102
10
1
Z
( )
Ω
10-1
10-2
1
2
3
5
4
Curve 1: 330 µF; 63 V
Curve 2: 680 µF; 40 V; 25 V
Curve 3: 1000 µF; 25 V
Curve 4: 1500 µF; 16 V; 10 V
Curve 5: 2200 µF; 10 V
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 9Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Table 5
Note
• Multiplier of useful life code: MBC242
Fig. 17 - Multiplier of useful life as a function of ambient temperature and ripple current load
ENDURANCE TEST DURATION AND USEFUL LIFE
NOMINAL CASE SIZE
Ø D x L
(mm)
ENDURANCE
AT 125 °C
(h)
USEFUL LIFE
AT 125 °C
(h)
6.5 x 18 2000 4000
8 x 18 2000 4000
10 x 18 2000 4000
10 x 25 2000 4000
10 x 30 4000 8000
12.5 x 30 4000 8000
15 x 30 4000 8000
18 x 30 4000 8000
18 x 38 4000 8000
21 x 38 4000 8000
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100 110
Tamb (°C)
120 130
3.9
4.0
4.1
4.2
4.3
Lifetime multiplier
(1)
IA
IR
6.0
4.0
2.0
1.5
1.0
3.0
400
100
60
20
30
12
8.0
200
MBC242
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 125 °C
(1) Useful life at 125 °C and IR applied:
Case Ø D x L = 6.5 mm x 18 mm to
10 mm x 25 mm: 4000 h
Case Ø D x L = 10 mm x 30 mm to
21 mm x 38 mm: 8000 h
119 AHT-DIN
www.vishay.com Vishay BCcomponents
Revision: 09-Jan-17 10 Document Number: 28335
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 6
Table 7
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
UR
(V)
FREQUENCY (Hz)
50 100 300 1000 3000 10 000
IR MULTIPLIER
10 0.95 1.00 1.07 1.12 1.15 1.20
16 0.95 1.00 1.07 1.12 1.15 1.20
25 0.90 1.00 1.12 1.20 1.25 1.30
40 0.90 1.00 1.12 1.20 1.25 1.30
63 0.85 1.00 1.20 1.30 1.35 1.40
100 0.85 1.00 1.20 1.30 1.35 1.40
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4 /
EN 130300
subclause 4.13
Tamb = 125 °C; UR applied;
Case Ø D x L = 6.5 mm x 18 mm to
10 mm x 25 mm: 2000 h;
Case Ø D x L = 1 0 mm x 30 mm to
2 1 mm x 38 mm: 4000 h
C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1
Tamb = 125 °C; UR and IR applied;
Case Ø D x L = 6.5 mm x 18 mm to
10 mm x 25 mm: 4000 h;
Case Ø D x L = 10 mm x 30 mm to
21 mm x 38 mm: 8000 h
C/C: ± 45 %
tan 3 x spec. limit
Z 3 x spec. limit
IL5 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN 130300
subclause 4.17
Tamb = 125 °C; no voltage applied;
UR = 10 V to 63 V: 500 h;
UR = 100 V: 100 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C, tan , Z:
for requirements
see “Endurance test” above
IL5 2 x spec. limit
Reverse voltage
IEC 60384-4 /
EN 130300
subclause 4.15
Tamb = 125 °C:
125 h at U = -1 V
followed by 125 h at UR
C/C: ± 20 %
tan spec. limit
IL5 spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
