2N6659, 2N6659-2
www.vishay.com Vishay Siliconix
S12-0591-Rev. A, 19-Mar-12 1Document Number: 63868
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
N-Channel 35 V (D-S) MOSFET
FEATURES
Military Qualified
Low On-Resistence: 1.3
Low Threshold: 1.7 V
Low Input Capacitance: 35 pF
Fast Switching Speed: 8 ns
Low Input and Output Leakage
BENEFITS
Guaranteed Reliability
•Low Offset Voltage
Low-Voltage Operation
Easily Driven Without Buffer
High-Speed Circuits
Low Error Voltage
APPLICATIONS
Hi-Rel Systems
Direct Logic-Level Interface: TTL/CMOS
Drivers: Relays, Solenoids, Lamps, Hammers, Displays,
Memories, Transistors, etc.
Battery Operated Systems
•Solid-State Relays
Notes
a. Pulse width limited by maximum junction temperature.
b. Not required by military spec.
PRODUCT SUMMARY
VDS (V) 35
RDS(on) () at VGS = 10 V 1.8
Configuration Single
1
2 3
TO-205AD
(TO-39)
Top View
DG
S
ORDERING INFORMATION
PART PACKAGE DESCRIPTION/DSCC
PART NUMBER
VISHAY ORDERING
PART NUMBER
2N6659 TO-205AD
(TO-39)
Commercial 2N6659
Commercial, Lead (Pb)-free 2N6659-E3
2N6659-2 See -2 Flow Document 2N6659-2
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Drain-Source Voltage VDS 35 V
Gate-Source Voltage VGS ± 20
Continuous Drain Current (TJ = 150 °C) TC = 25 °C ID
1.4
A
TC = 100 °C 1
Pulsed Drain CurrentaIDM 3
Maximum Power Dissipation TC = 25 °C PD
6.25 W
TC = 100 °C 2.5
Thermal Resistance, Junction-to-Ambientb RthJA 170 °C/W
Thermal Resistance, Junction-to-Case RthJC 20
Operating Junction and Storage Temperature Range TJ, Tstg - 55 to 150 °C
2N6659, 2N6659-2
www.vishay.com Vishay Siliconix
S12-0591-Rev. A, 19-Mar-12 2Document Number: 63868
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. FOR DESIGN AID ONLY, not subject to production testing.
b. Pulse test: PW 300 μs duty cycle 2 %.
c. Switching time is essentially independent of operating temperature.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONS (TA = 25 °C, unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS
LIMITS
UNIT MIN. TYP.aMAX.
Static
Drain-Source Breakdown Voltage VDS VDS = 0 V, ID = 10 μA 35 75 - V
Gate-Source Threshold Voltage VGS(th) VDS = VGS, ID = 1 mA 0.8 1.7 2
Gate-Body Leakage IGSS VGS = ± 15 V VDS = 0 V - - ± 100 nA
TC = 125 °C - - ± 500
Zero Gate Voltage Drain Current IDSS VGS = 0 V VDS = 35 V - - 10 μA
VDS = 28 V TC = 125 °C - - 500
On-State Drain Current ID(on) V
GS = 10 V VDS = 10 V 1.5 3 - A
Drain-Source On-State ResistancebRDS(on)
VGS = 5 V ID = 0.3 A - 2 5
VGS = 10 V ID = 1 A - 1.3 1.8
TC = 125 °C - 2.4 3.6
Forward Transconductancebgfs VDS = 7.5 V, ID = 0.525 A 170 350 - mS
Diode Forward Voltage VSD IS = 0.99 A, VGS = 0 V - 0.8 - V
Dynamic
Input Capacitance Ciss
VGS = 0 V VDS = 25 V, f = 1 MHz
-3550
pF
Output Capacitance Coss -2540
Reverse Transfer Capacitance Crss -710
Drain-Source Capacitance Cds -3040
Switchingc
Turn-On Time tON VDD = 25 V, RL = 23
ID 1 A, VGEN = 10 V, Rg = 25
-810
ns
Turn-Off Time tOFF -8.510
2N6659, 2N6659-2
www.vishay.com Vishay Siliconix
S12-0591-Rev. A, 19-Mar-12 3Document Number: 63868
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Ohmic Region Characteristics
Transfer Characteristics
On-Resistance vs. Drain Current
Output Characteristics for Low Gate Drive
On-Resistance vs. Gate-to-Source Voltage
Normalized On-Resistance vs. Junction Temperature
VDS -)V( egatloV ecruoS-ot-niarD
2.0
0123 45
1.6
1.2
0.8
0.4
0
VGS = 10 V 8 V
7 V
6 V
5 V
4 V
3 V
2 V
ID- Drain Current (A)
VGS -)V( egatloV ecruoS-etaG
1.0
0.8
0.6
0
0120
0.4
0.2
468
125 °C
25 °C
VDS = 15 V
TJ = - 55 °C
ID- Drain Current (A)
2.5
2.0
1.5
0
0.24.00
1.0
0.5
0.8 1.2 1.6
VGS = 10 V
RDS(on) - Drain-Source On-Resistance (Ω)
ID- Drain Current (A)
VDS - Drain-to-Source Voltage (V)
2.0 V
100
0 0.4 0.8 1.2 1.6 2.0
80
60
40
20
0
2.8 V
2.6 V
2.4 V
2.2 V
VGS = 10 V
1.8 V
ID- Drain Current (mA)
VGS - Gate-Source Voltage (V)
2.8
048121620
2.4
2.0
1.6
0
1.2
0.8
0.4
1.0 A
0.5 A
ID = 0.1 A
RDS(on) - On-Resistance (Ω)
TJ- Junction Temperature (°C)
2.25
2.00
1.75
0.50
-50 - 05101
1.50
1.25
30 70 110
1.00
0.75
VGS = 10 V
ID= 1.0 A
0.2 A
RDS(on) - Drain-Source On-Resistance (Normalized)
2N6659, 2N6659-2
www.vishay.com Vishay Siliconix
S12-0591-Rev. A, 19-Mar-12 4Document Number: 63868
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Threshold Region
Gate Charge
Capacitance
Load Condition Effects on Switching
Normalized Thermal Transient Impedance, Junction-to-Ambient
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?70223.
VGS - Gate-to-Source Voltage (V)
10
1
0.01
0.5
0.1
1.0 1.5 2.0
VDS = 5 V
25 °C
- 55 °C
125 °C
TJ= 150 °C
ID- Drain Current (mA)
Qg- Total Gate Charge (pC)
15.0
12.5
10.0
00060010
7.5
5.0
200 300 400
2.5
500
ID= 1.0 A
VDS = 30 V
48 V
VGS - Gate-to-Source Voltage (V)
VDS - Drain-to-Source Voltage (V)
Coss
120
100
80
0
05010
60
40
20 30 40
20
Ciss
Crss
VGS = 0 V
f = 1 MHz
C- Capacitance (pF)
ID- Drain Current (A)
0111.0
100
10
1
50
20
5
2
VDD = 25 V
Rg = 25 Ω
VGS = 0 V to 10 V
td(off)
tr
td(on)
tf
t- Switching Time (ns)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.