US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest information.
Flyback Transformers
Document 608
Document 608 Revised 03/15/17
For Silicon Laboratories
Si3402 PD Controllers
Inductance Inductance Leakage
Part Power
at 0 A2 at Ipk3 DCR max (Ohms)4 inductance5 Turns ratio6 Ipk3
number1 (W) ±10% (µH) min (µH) pri sec max (µH) pri : sec (A) Output7
FA2924-AL_ 15 40.0 36.0 0.100 0.025 0.666 1 : 0.3 2.0 3.3 V, 4.5 A
FA2805-CL_ 15 40.0 36.0 0.108 0.040 0.621 1 : 0.4 2.0 5.0 V, 3.0 A
FA2925-AL_ 15 40.0 36.0 0.100 0.155 0.566 1 : 1 2.0 12.0 V, 1.25 A
1. When ordering, please specify packaging code:
FA2925-ALD
Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer
added ($25 charge), use code letter D instead.
2. Inductance is for the primary, measured at 200 kHz, 0.2 Vrms, 0 Adc.
3. Ipk is peak primary current drawn at minimum input voltage.
4. DCR for the secondary is per winding.
5. Leakage inductance measured between pins 1 and 2 with all secondary pins shorted.
6. Turns ratio is with the secondary windings connected in parallel.
7. Output is with the secondary windings connected in parallel.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.500
12,70
0.530
13,46
0.039
1,00
0.512
13,00
0.699
17,75max
0.028
0,70
0.098
2,50
max
max
56
110
0.004 /0,10
Dot above pin1
0.080
2,03
1
0.590
14,99
0.050
1,27
0.098
2,50
Recommended
Land Pattern
Secondary windings to be con-
nected in parallel on PC board
7
8
9
10
Pri Sec
1
2
Core material Ferrite
Terminations RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 6.57 – 6.71 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 175 per 13 reel Plastic tape: 32 mm wide, 0.5 mm thick,
28 mm pocket spacing, 12.93 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Designed for Power over Ethernet PD controllers for applica-
tions up to 15 Watts.
Operates in continuous conduction mode with 36 – 72 V input
1500 Vrms, one minute isolation between primary and secondary
Dimensions are in inches
mm
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
FA2924-ALB FA2805-CLB FA2925-ALD FA2805-CLD FA2924-ALD FA2925-ALB