Photologic(R) Slotted Optical Switch "Wide Gap" Series OPB900 through OPB913 Series (L, W__Z) L Series Features: * * * * * 0.375" (9.5 mm) wide gap Choice of logical output configurations Choice of opaque or IR transmissive housing material Choice of PCBoard or 26 AWG, UL rated wire Data rates to 250 kBaud Series Product PhotoWHere Description: The OPB900 - OPB913 series of Photologic(R) Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.375" (9.5mm) wide slot, a user can specify the type and polarity of the TTL output and the type of shell material. Electrical output can be specified as either TTL Totem Pole (buffered) or TTL Open Collector, either of which can be supplied with an inverted output polarity. All versions have the added stability of hysteresis built into the amplification circuitry. Applications: * * * * * Part Number Guide -- OPB900 Series (L, W) OPB9_ _ _ _ _ _ Mechanical switch replacement Speed indication (tachometer) Mechanical limit indication Edge sensing Object sensing 0 = Dust protection with apertures 1 = Open apertured L55 = Solder lead termination (PCBoard mount) 0 = Totem Pole 1 = Open Collector 2 = Inverted Totem Pole 3 = Inverted Open Collector W5_Z= 26 AWG wire termination (24" [61cm] long) Totem Pole Output Totem-Pole-Output Aperture sizes: 1 = 0.010" (0.25 mm) 5 = 0.050" (1.52 mm) OpenOpen-Collector-Output Collector Output Inverted Output Series Inverted Totem-Pole Inverted Open Collector RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 09/06 Page 1 of 4 Photologic(R) Slotted Optical Switch "Wide Gap" Series OPB900 through OPB913 Series (L, W__Z) DIMENSIONS ARE IN: Color-Pin # Description Color-Pin # Red-1 Anode Black-2 [ MILLIMETERS] INCHES Description Color-Pin # Description Cathode White-3 VCC Color-Pin # Blue-4 Description Color-Pin # Description Output Green-5 Ground Absolute Maximum Ratings (TA = -40C to + 70 Unless otherwise noted) Storage Temperature -40 C to +85 C Operating Temperature -40 C to +70 C Lead Soldering Temperature (1/16" (1.6 mm) from case for 5 seconds with soldering iron)(1) 260 C Input Infrared LED DC Forward Diode (LED) Current 40 mA DC Reverse Diode (LED) Voltage 2V Input Diode Power Dissipation (1) 100 mW Output Photologic(R) Supply Voltage, VCC (not to exceed 3 seconds) 10V Voltage at Output Lead (Open Collector Output version) 35 V Output Photologic(R) Power Dissipation(2) (3) Total Device Power Dissipation 200 mW 300 mW Notes: (1) Derate linearly 2.22 mW/C above 25C (2) Derate linearly 4.44 mW/C above 25C (3) Derate linearly 6.66 mW/C above 25C (4) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (5) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and keytones. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 09/06 Page 2 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Photologic(R) Slotted Optical Switch "Wide Gap" Series OPB900 through OPB913 Series (L, W__Z) Electrical Characteristics (TA = -40C to + 70 Unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OPB240 for more information -- for reference only) VF Forward Voltage - - 1.7 V IF = 20 mA, TA = 25 C IR Reverse Current - - 100 A VR = 2 V, TA = 25 C Output Photologic(R) Sensor (See OPB560 for more information -- for reference only) VCC Operating D.C. Supply Voltage 4.75 - 5.25 V - - 15 mA VCC = 5.25 V, IF = 0 mA(1) ICCL Low Level Supply Current: Buffered Totem-Pole Output Buffered Open-Collector Output Inverted Totem-Pole Output Inverted Open-Collector Output - - 15 mA VCC = 5.25 V, IF = 20 mA(1) High Level Supply Current: Buffered Totem-Pole Output Buffered Open-Collector Output - - 15 mA VCC = 5.25 V, IF = 20 mA(1) Inverted Totem-Pole Output Inverted Open-Collector Output - - 15 mA VCC = 5.25 V, IF = 0 mA(1) Low Level Supply Current: Buffered Totem-Pole Output Buffered Open-Collector Output - - 0.4 V VCC = 4.75 V, IOL = 12.8 mA, IF = 0 mA(1) Inverted Totem-Pole Output Inverted Open-Collector Output - - 0.4 V VCC = 4.75 V, IOL = 12.8 mA , IF = 20 mA(1) High Level Output Voltage: Buffered Totem-Pole Output 2.4 - - V VCC = 4.75 V, IOH = -800 A, IF = 20 mA(1) Inverted Totem-Pole Output 2.4 - - V VCC = 4.75 V, IOH = -800 A, IF = 0 mA(1) High Level Output Current: Buffered Open-Collector Output - - 100 A VCC = 4.75 V, VOH = 30 V, TA = 25 C Inverted Open-Collector Output - - 100 A VCC = 4.75 V, VOH = 30 V, TA = 25 C LED Positive-Going Threshold Current - - 20 mA VCC = 5 V, TA = 25 C Hysteresis - 2 - - Short Circuit Output Current: Buffered Totem-Pole Output -30 - -100 mA VCC = 5.25 V, IF = 20 mA Output = GND Inverted Totem-Pole Output -30 - -100 mA VCC = 5.25 V, IF = 0 mA Output = GND Output Rise Time, Output Fall Time - 70 - ns Propagation Delay Low-High and HighLow - 5 - s ICCH VOL VOH IOH IF(+) IF(+)/IF(-) IOS tr, tf tPLH, tPHL VCC = 5 V VCC = 5 V, TA = 25 C IF = 0 or 20 mA RL = 8 TTL Loads (Totem-Pole) RL = 360 (Open-Collector) Notes: (1) Normal application would be with light source blocked, simulated by IF = 0 mA. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 09/06 Page 3 of 4 Photologic(R) Slotted Optical Switch "Wide Gap" Series OPB900 through OPB913 Series (L, W__Z) OPB900 - Flag Next to Emitter OPB900 - Flag Next to Sensor 1.20 1.20 1.00 1.00 Right to Left Right to Left Right to Left (back) Right to Left (back) 0.80 Top to Bottom Bottom to Top Top to Bottom Logic Logic 0.80 0.60 Bottom to Top 0.60 Left to Right Left to Right 0.40 0.40 Left to Right (back) 0.20 0.20 0.00 0.00 Left to Right (back) 0.05 0.10 0.15 0.20 0.25 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB900 - Flag in Middle of Slot 1.20 1.00 0 Right to Left Top to Bottom Right to Left (back) Logic 0.80 0.60 Top to Bottom Bottom to Top Emitter Left to Right 0.40 Left to Right Left to Right (back) Right to Left Sensor 0.20 0 0.00 0.00 0.05 0.10 0.15 0.20 Width 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 09/06 Page 4 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com