14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Bluetooth (R) Smart Module Bluetooth(R) 4.2 Low Energy EYSGJNAWY-1X Data Report Bluetooth(R) Bluetooth SIG, Inc. TAIYO YUDEN 1/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN HD-AG-A150106 HD-AM-A150106 HD-AE-A150106 HD-MC-A150106 HD-AD-A150106 HD-BA-A150106 HQ-BA-523 HD-BB-A150106 1/4 - 4/4 1/1 1/2 - 2/2 1/3 - 3/3 1/1 1/1 1/2 - 2/2 1/3 - 3/3 1/3 - 3/3 1/1 1/23 - 23/23 14-Sep.-2015 > Ver.1.00 Release TAIYO YUDEN 2/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AG-A150106 TAIYO YUDEN (1/4) Control name ("") Bluetooth(R) 4.2 Low Energy "EYSGJNAWY-1X" ("") 1. : EYSGJN : EYSGJNAWY-1X * 2. : Bluetooth(R) Ver 4.2 Low Energy 3. : 4. : Pb +6 RoHS (Pb, Cd, Hg, Cr , PBB, PBDE) 5. : 11.3 x 5.1 x 1.3 mm 28 6. : , 7. : - - - - - Bluetooth(R) 4.2 Low Energy - Slave Master 8. : & + : 2000 * TAIYO YUDEN 3/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AG-A150106 TAIYO YUDEN (2/4) Control name 9. : a. b. c. d. e. a) b) f. g. h. i. 2.4GHz j. k. - ( ) - TAIYO YUDEN 4/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AG-A150106 TAIYO YUDEN (3/4) Control name General Items l. m. n. 001-A05676 o. a) IC RSS 2 (1) (2) b) Industry Canada c) ID -Contains Transmitter module IC : 4389B-EYSGJN -Contains IC : 4389B-EYSGJN p. FCC a) FCC 15 2 (1) (2) b) ID -Contains Transmitter Module FCC ID: RYYEYSGJN -Contains FCC ID: RYYEYSGJN c) d) FCC TAIYO YUDEN 5/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AG-A150106 TAIYO YUDEN (4/4) Control name General Items q. Bluetooth(R)4.2 Bluetooth(R)4.2 Bluetooth(R)4.2 Bluetooth(R)4.2 r. EYSGJN PHY Component Bluetooth SIG QDID 69825 End Product PHY ()SoftDevice Link QDID Master : 54056,Slave : 61110Host QDID Master : 66320, Slave : 56948 BQE 1. () (Reverse engineering ) 2. 3. ("") TAIYO YUDEN 6/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AM-A150106 TAIYO YUDEN (1/1) Control name Symbol Parameter VCC_NRF Min. Max. Units -0.3 +3.6 V 0 V GND VIO -0.3 VCC_NRF+ 0.3 V Storage temperature -40 +85 Deg-C 1 kV 100 V MSL Moisture Sensitivity Level 2 ESD HBM Human Body Model ESD CDM Charged Device Model Endurance Flash Memory Endurance 20000 Retention Flash Memory Retention 10 years write/erase cycles At 40 deg-C Number of times an address can be written 2 times between erase cycles TAIYO YUDEN 7/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AE-A150106 TAIYO YUDEN (1/2) Control name Symbol VCC_NRF Parameter tR_VCC_NRF Supply rise time (0V to 1.8V) TA Operation temperature Min. 1.8 Supply voltage, normal mode Typ. 3.0 -25 25 Max. 3.6 Units V 100 ms 75 Deg-C Rise time DC Topr.= 25 , VCC_NRF = 3.0V Symbol Parameter (condition) Min. Typ. Max. Units VIH Input high voltage 0.7 VCC_NRF VCC_NRF V VIL Input low voltage GND 0.3 VCC_NRF V VOH Output high voltage (std. drive, 0.5 mA) VCC_NRF-0.3 VCC_NRF V VOH Output high voltage (high-drive, 5 mA) VCC_NRF-0.3 VCC_NRF V VOL Output low voltage (std. drive, 0.5 mA) GND 0.3 V VOL Output low voltage (high-drive, 5 mA) GND 0.3 V RPU Pull-up resistance 11 13 16 kohm RPD Pull-down resistance 11 13 16 kohm ITX,+4dBm TX only run current @ POUT =+4 dBm 16 mA IRX RX only run current 13 mA 0.6 uA IOFF Current in SYSTEM-OFF, no RAM retention RSTR RESET High to Module Ready RPW RESET Pulse Width 300 600 5 ms ms UART specifications Symbol fUART Description Min. Baud rate for UART Typ. 38400 Max. Units bps TAIYO YUDEN 8/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AE-A150106 TAIYO YUDEN (2/2) Control name RF Symbol Description Min. Fop Operating frequencies 2402 Df Frequency deviation PRF Maximum output power PRFCR RF power accuracy PBW 20 dB bandwidth for modulated carrier PRF1 +/-225 Typ. +/-250 Max. Units 2480 MHz +/-275 kHz 4 dBm +/-4 dB 1100 kHz 1st Adjacent Channel Transmit Power 1 MHz -20 dBc PRF2 2nd Adjacent Channel Transmit Power 2 MHz -45 dBc PRXMAX Maximum received signal strength at < 0.1% PER 0 dBm PSENS IT Receiver sensitivity (0.1% BER) Ideal transmitter -93 dBm PSENS DT Receiver sensitivity (0.1% BER) dirty transmitter -91 dBm 950 TAIYO YUDEN 9/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-MC-A150106 TAIYO YUDEN (1/3) Control name VCC_NRF AVDD nRF51822 WLCSP OUT_ANT OUT_MOD SWDCLK SWDIO/RESET Filter P0.00 to P0.06 P0.17, P0.19, P0.21, P0.23, P0.25 X'tal 32MHz TAIYO YUDEN 10/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-MC-A150106 TAIYO YUDEN (2/3) Control name TAIYO YUDEN 11/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. HD-MC-A150106 (3/3) Control name SWDIO (Active low) PAD13-PAD14 VCC: 1.8V to 3.6V 100uF TAIYO YUDEN 12/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-AD-A150106 TAIYO YUDEN (1/1) Control name : +/- 0.2mm : (mm) Pad size Signal pad 23 - 0.4 x 0.8 mm Corner pad 4 - 0.55 x 0.8 mm Center pad 1 - 2.8 x 1.5 mm Metal mask opening 0.35 x 0.7 mm 0.45 x 0.75 mm 1.1 x 1.2 mm x 2 0.4 0.1mm Center pad 1.1 1.2 TAIYO YUDEN 13/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. HD-BA-A150106 (1/1) Control name Pin Descriptions Pin 1 Pin name GND Pin function Ground Description Ground (0 V) 2 3 NC NC Not Connected Reserved Not Connected Reserved 4 P0.21 Digital Input Role switch / Sleep indication of host / Resume from Power saving mode 5 VCC_NRF Power 6 AVDD Power 7 P0.23 Digital Output Mode indication of module 8 P0.17 Digital Input Connection Parameter change (Peripheral) / Request DFU mode 9 GND Ground Ground (0 V) 10 DEC2 Power Reserved 11 P0.19 Digital Output State indication of module / DFU indication 12 GND Ground Ground (0 V) 13 OUT_ANT Antenna In/Out . Pin 22 OUT_MOD 14 OUT_MOD RF In/Out RF I/O pin. Pin 23 OUT_ANT 15 GND Ground Ground (0 V) 16 SWDIO Digital I/O (active low). Flash I/O 17 SWDCLK Digital input Flash I/O 18 P0.25 Digital Output Wake up request 19 P0.03 Digital input UART_RX 20 GND Ground Ground (0 V) 21 P0.01 Digital Output UART_TX 22 P0.02 Digital Input UART_CTS 23 P0.00 Digital Output UART_RTS 24 DCC Power Reserved 25 P0.05 Digital Output Module active / sleep indicate 26 P0.06 Digital Input Disconnect request / Resume from Power saving mode 27 P0.04 Digital Input Forced initialize / Request Sleep mode 28 GND Ground Ground (0 V) TAIYO YUDEN 14/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. HQ-BA-523 (1/2) Control name (1) 1. 40/90RH 2. 30/60RH 3. ()255/10%RH (2) (2)-2 1. 12 ()() 2. 10%RH 3. 168 () 4. (1)(2)-2(2)-3 125 24h 5. (2)-4 1 6.(100V ) 7. 8. 9. 10. TAIYO YUDEN 15/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. HQ-BA-523 Control name (2/2) Recommented Reflow Profile 300 Temp(deg) Peak Temp:250deg Max 250 230deg up : 40secMax 200 150 100 130-180deg Pre-heat : 60~120sec 50 0 IN OUT TAIYO YUDEN 16/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. HD-BB-A150106 Control name (1/3) Packaging Specification (1) Packaging Material Name Outline Emboss Cover Tape Reel Desiccant Humidity indicator card Aluminum moisture barrier bag Label Corrugated cardboard box(Inner) Corrugated cardboard box(Outer) (2) Packaging Unit Max 2000 pieces/Reel (3) Packaging Figure Humidity indicator card Desiccant Materials 24mm wide - 12mmPitch 24mm - 12mm Conductive PS PS 330 mm Conductive PS PS Note 30gx1 420x460(mm) (AS)PET/AL/NY/PE(AS) 339x351x74(mm) 369x369x277(mm) Max 6000 pieces/Box(Outer) Label-1 Label-2 -1 -2 Aluminum moisture barrier bag Corrugated cardboard box(Inner) Label-1 -1 Corrugated cardboard box(Inner) Corrugated cardboard box(Outer) (4) Label Label-1 CAM PANY NAM E PURCHASE ORDER DESCRIPITON QUANTITY No. Label-2 LABEL MSL Level3 TAIYO YUDEN 17/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. HD-BB-A150106 Control name (2/3) Tape specification The direction of a tape drawer First Pin M ark End part M odule receipt part Leader part 100mm 160mm More than160mm More than100mm 300mm More than300mm The direction of a tape drawer TAIYO YUDEN 18/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X Control No. HD-BB-A150106 TAIYO YUDEN Control name (3/3) Reel specification (Unit:mm) 3302 130.2 W-1.5/+2 Tape wide W 9.4mm 12 13.4mm 16 17.4mm 24 25.4mm 32 33.4mm 44 45.4mm Taping performance Both of an embossing tape top cover tape bear this, when the power of 10N is applied in the direction of a drawer. N The exfoliation adhesion of a top cover tape is the intensity of 0.11.3N. (The angle to pull is 165180 degrees. The speed to pull is 300 mm/min.) 165180300mm/min 0.11.3N Note Lack of the parts in 1 reel is with two or less pieces. 2 2 MSL Level 3 Under control M SL TAIYO YUDEN 19/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. (1/3) Control name TAIYO YUDEN 20/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. (2/3) Control name *1 "NO components, NO chassis plating etc.area". *2 TAIYO YUDEN 21/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. (3/3) Control name TAIYO YUDEN 22/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Control No. (1/1) Control name 1. VCC_NRF (0V 1.8V) 100ms 2. VCC_NRF (1.8 - 3.6V) VCC_NRF LDO 1.8V 3.6VDCDC 2.1V 3.6V DC/DC Nordic Semiconductor "nRF51 _Series_Reference_Manual v3.0" 12.1.3 3. (: CR2032) ( 100uF ) 4. 4-1. VCC_NRF VCC_NRF 0.5mm 0.2mm VCC_NRF 0.5mm Module * * 4-2. ( 10pF) (1uF 10uF) GND GND 4-3. GND GND GND GND GND GND GND TAIYO YUDEN 23/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Revision History Version 1.0.0 Date 2015/09/03 Description First release. TAIYO YUDEN 24/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Copyright Information: - Bluetooth(R) Smart module Software This software is owned by TAIYO YUDEN CO., LTD. You and your company shall conform following: (1) The software image may not be made a copy from TAIYO YUDEN CO., LTD's module. (2) The software image provided by Taiyo Yuden must not be loaded to another vendor's module or chipset, and can be copied only for backup. (3) The software image may not be provided to anyone. (4) The software image may not be analyzed by reverse engineering, decompile, and disassemble. TAIYO YUDEN CO., LTD. is not responsible for any damage caused by this software. Copyright Year 2015Firmware Version is Ver. 4.0.0 There is a possibility of changing a software specification. TAIYO YUDEN 25/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN Contents 1. OVERVIEW ................................................................................................................. 27 2. BASIC SOFTWARE STATE DIAGRAM ..................................................................... 28 3. RESPONSE EVENT SYNTAX .................................................................................... 29 4. RESPONSE EVENT SYNTAX .................................................................................... 29 5. ERROR CODES .......................................................................................................... 30 6. CONFIGURATION ...................................................................................................... 31 7. MESSAGE SEQUENCE CHART ............................................................................... 32 8. 9. 7.1 POWER ON (CENTRAL) .......................................................................................... 32 7.2 POWER ON (PERIPHERAL) ..................................................................................... 32 7.3 CONNECT (CENTRAL)............................................................................................. 33 7.4 CONNECT (PERIPHERAL) ........................................................................................ 33 7.5 SENDING & RECEIVING DATA OVER A CONNECTED LINK .......................................... 34 7.6 CONNECTION PARAMETER UPDATE ......................................................................... 35 7.7 DISCONNECT REQUEST .......................................................................................... 35 GPIO STATE AND CONTROL ................................................................................... 36 8.1 SCANNING ............................................................................................................. 37 8.2 ADVERTISING ......................................................................................................... 37 8.3 CONNECT .............................................................................................................. 37 8.4 DISCONNECT & STANDBY ....................................................................................... 37 8.5 FORCED INITIALIZE ................................................................................................. 37 8.6 SLEEP MODE REQUEST AND INDICATE ..................................................................... 38 SERVICE ..................................................................................................................... 39 10. UART CONFIGURATION ........................................................................................... 39 11. SWD (SERIAL WIRE DEBUG) ................................................................................... 39 12. HOST WAKE-UP SEQUENCE ................................................................................... 40 13. DTM (DIRECT TEST MODE) ..................................................................................... 41 13.1 ENTER DTM AND EXIT DTM (ONE-TIME) ................................................................. 41 13.2 DTM COMMANDS/EVENTS ..................................................................................... 41 14. GPIO CHECK .............................................................................................................. 42 15. SLEEP MODE (SYSTEM ON) .................................................................................... 43 15.1 ENTER SLEEP MODE ............................................................................................... 43 15.2 EXIT SLEEP MODE .................................................................................................. 43 16. POWER SAVING MODE (SYSTEM OFF) ................................................................. 44 16.1 EXIT POWER SAVE ................................................................................................. 44 17. DEVICE FIRMWARE UPDATES (DFU) ..................................................................... 45 18. NOTICES ..................................................................................................................... 46 TAIYO YUDEN 26/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X 1. TAIYO YUDEN Overview This specification is for module based on TAIYO YUDEN original service. This specification will only define supporting point-to-point connections. GPIO UART Host Interface Application GAP GATT ATT SM L2CAP Hardware Software Block Diagram Module Module Peripheral Central Usage Model * We support only the connection between TYSA-B Lite Central and TYSA-B Lite Peripheral. TYSA-B Lite supports only one-to-one connection. TAIYO YUDEN 27/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 2. Basic software state diagram Power OFF: Power OFF When Power ON, P0.21 Low : start as Peripheral P0.21 High : start as Central Advertising / Scanning: Search for 60 second Connected Send and receive data Power save SYSTEM OFF Resume with P0.21 Low : start as Peripheral Resume with P0.06 Low : start as Central Direct Test mode RF PHY testing of Bluetooth(R) low energy devices. TAIYO YUDEN 28/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 3. Response Event Syntax Response event which host receives are started with <CR><LF> and ended <CR><LF>. Response Event: <CR><LF>{event characters}[Parameter1Parameter2::Parameter(N)]<CR><LF> 4. Response Event Syntax Response Events ACK NAK## Function CON Connection successful DCO Disconnect PAS SCT INT Pairing Success Scanning Timeout (Central) Connection Interval (Central) ADT SDC Advertising Timeout (Peripheral) Service Discovery Complete (Peripheral) Disable Service (Peripheral) DSR Parameters Successful Failed Failed Reason - See Error Section (5.) for further details. Established Remote BD_ADDR Parameter0: Max Connection Interval Parameter1: Min Connection Interval TAIYO YUDEN 29/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 5. Error Codes # -1 00 Error Name Unknown Error Command Not Recognized 03 04 Send Data Error UART Buffer full (buffer size : 512byte) 05 06 Connection Fail (Central Only) Device Full 07 Pairing Failed 08 11 FLASH access error Connection Parameter Error 21 Advertising Parameter Error (Peripheral Only) Scanning Parameter Error 31 Program Logic Cause / Action taken by Host There is the possibility that the hardware is out of order. It confirms whether or not the command is correct. TYSA-B Lite doesn't support any command. Wait for connection success. ("CON" response) It failed to send data over BLE. Wait until data is sent over BLE. (in CONNECTED state) Buffer is cleared and input command again. (in other state) Please try again. If bond information exists, delete it and try again. Flash block for storing pairing information is full. (Max 7) To store new device information, delete with forced initialize (8.5). Please try again. If bond information exists, delete with forced initialize (8.5) and try again. Please run forced initialize (8.5). It confirms connection parameter. Please run forced initialize (8.5). It confirms advertising data and parameter. Please run forced initialize (8.5). It confirms scanning parameter. Please run forced initialize (8.5). TAIYO YUDEN 30/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 6. Configuration Central Item Scanning Timeout Scanning Interval Scan window Connection Interval Supervision Timeout Slave Latency TX Power Target Device Name Value 60 sec 100 msec 100 msec Minimum : 7.5ms 5000ms 0 4 dBm TYSA-B Lite Maximum : 7.5ms Peripheral Item Advertising Timeout Advertising Interval Connection Interval Supervision Timeout Slave Latency Security TX Power Local Device Name Value 60 sec 40 msec Minimum : 200ms 5000 msec 0 None 4 dBm TYSA-B Lite Maximum : 200ms TAIYO YUDEN 31/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 7. Message Sequence Chart 7.1 Power On (Central) HOST Module Power OFF Power ON and P0.21 High "<CR><LF>Ver. X.X.XC<CR><LF>" Scanning Scanning "<CR><LF>SCT<CR><LF>" 300 milliseconds after SCT Power save 7.2 Power On (Peripheral) HOST Module Power OFF Power ON and P0.21 Low "<CR><LF>Ver. X.X.X<CR><LF>" Advertising Advertising "<CR><LF>ADT<CR><LF>" 300 milliseconds after ADT Power save TAIYO YUDEN 32/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 7.3 Connect (Central) HOST Central Peripheral Scanning Scanning Target Device Found CONNECT_REQ Connection established WRITE_REQUEST WRITE_RESPONSE "<CR><LF>CON[BD_ADDR]<CR><LF>" Connected 7.4 Connect (Peripheral) HOST Peripheral Central Advertising Advertising CONNECT_REQ "<CR><LF>SDC<CR><LF>" Connection established WRITE_REQUEST WRITE_RESPONSE "<CR><LF>CON[BD_ADDR]<CR><LF>" Connected TAIYO YUDEN 33/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 7.5 Sending & Receiving Data over a connected Link HOST Peripheral Central Host Connected Data1 Data1 Data1 Data2 Data2 Data2 Max send a packet data size = 20bytes Max receive a packet data size = 20bytes TAIYO YUDEN 34/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 7.6 Connection Parameter update HOST Peripheral Central Host Connected 5 seconds after connect Connection Parameter Update Request (200ms) Connection Parameter Update Response <CR><LF>INT00A000A0<CR><LF> P0.17 High or Low Connection Interval Connection Parameter Update Request Low : 7.5ms Connection Parameter Update Response High : 200ms <CR><LF>INT[XXXX][XXXX]<CR><LF> 7.7 Disconnect Request HOST Module Module Connected P0.06 Low for more than 50msec LL_TERMINATE_IND LL_ack "<CR><LF>DCO<CR><LF>" 300 milliseconds after DCO Power save TAIYO YUDEN 35/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 8. GPIO state and control Pin Name P0.04 Input / Output Input P0.17 Input P0.05 P0.19 Output Output P0.06 Input Description Forced initialize Request Sleep mode Connection Parameter change (Peripheral) Request DFU mode Module active/sleep indicate State indication of module DFU indication Disconnect request Resume from Power saving mode P0.21 Input P0.25 P0.23 Output Output Role switch Sleep indication of host Resume from Power saving mode Wake up request Mode indication of module TAIYO YUDEN 36/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 8.1 Scanning P0.19 High Low 250ms 250ms P0.23 Low 8.2 Advertising P0.19 High Low 500ms 500ms P0.23 Low 8.3 Connect P0.19 High P0.23 High 8.4 Disconnect & Standby P0.19 Low P0.23 Low 8.5 Forced initialize All user setting of the module return to a default value when make P0.04 Low at module startup. After P0.04 Low, H/W reset or power restart is necessary. TAIYO YUDEN 37/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 8.6 Sleep mode request and indicate P0.04 High Low for more than 50msec P0.05 High active Low for more than 50msec active sleep UART_TX High * Bufffer size : 128byte any events. If the buffer is full, further data received is discarded without TAIYO YUDEN 38/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 9. Service Primary Service TAIYO YUDEN Original Service UUID : 0x442F1570-8A00-9A28-CBE1-E1D4212D53EB Characteristic TAIYO YUDEN Original Characteristic UUID : 0x442F1571-8A00-9A28-CBE1-E1D4212D53EB (Read, Notify) TAIYO YUDEN Original Characteristic UUID : 0x442F1572-8A00-9A28-CBE1-E1D4212D53EB (Write, Write no response, Notify) * GATT Server is implemented in TYSA-B Lite Peripheral role. 10. UART configuration RX_PIN : P0.03 TX_PIN : P0.01 CTS_PIN : P0.02 RTS_PIN : P0.00 Baud rate : 38400 bps Data : 8 bit Parity : none Stop : 1 bit Hardware flow control : Enabled (In case of DTM, flow control is disabled) 11. SWD (Serial Wire Debug) SWDIO : SWDCLK : These pins are for FW debug and flash programming I/O. We recommend your company set up these pins for rewriting the firmware. TAIYO YUDEN 39/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 12. Host wake-up sequence Host Active P0.21 Host Sleep Host Active P0.25 UART_TX Communication data or an event occurs in HOST Sleep. It waits until the host becomes active. Module request to host wake-up via PIO. If HOST becomes Active, module send communication data or event. * Bufffer size : 128byte any events. If the buffer is full, further data received is discarded without TAIYO YUDEN 40/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 13. DTM (Direct Test Mode) 13.1 Enter DTM and exit DTM (one-time) HOST P0.04 Low && P0.06 Low && P0.17 Low Module Power ON Direct Test Mode H/W Reset or Power restart or Input "31 31" (HEX) Advertising / Scanning 13.2 DTM Commands/Events These commands/events are conforming to DTM of Bluetooth(R) specifications V4.0. Please refer to Bluetooth(R) specifications V4.0. (Core System Package [Low Energy Controller volume] Part F, Direct Test Mode) TAIYO YUDEN 41/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 14. GPIO check Host can inspect GPIO by special commands in DTM. HOST Module Direct Test Mode "Special command" Command (Hex value) 32 30 32 31 33 30 33 31 34 30 34 31 35 30 35 31 39 39 Function Response It makes P0.05 Low. It makes P0.05 High. It makes P0.19 Low. It makes P0.19 High. It makes P0.25 Low. It makes P0.25 High. It makes P0.23 Low. It makes P0.23 High. It acquires state of Input Pin. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 XX 00 00 XX: state Bit0: P0.04 (0:Low, 1:High) Bit1: P0.17 (0:Low, 1:High) Bit2: P0.06 (0:Low, 1:High) Bit3: P0.21 (0:Low, 1:High) Example 01 : P0.04 is High. Other Pin is Low. 0F: All Pin is High. 0B: P0.06 is Low. Other Pin is High. TAIYO YUDEN 42/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 15. Sleep Mode (SYSTEM ON) This Sleep is available in during Advertising/Scanning and Connection. UART I/F is not usable during Sleep. 15.1 Enter sleep mode HOST Module Active P0.04 Low for more than 50msec P0.05 Low Sleep UART I/F is disable In case of UART data happen, the module notify to Host via P0.25. It is same as "Host wake-up". 15.2 Exit sleep mode HOST Module Sleep P0.04 Low for more than 50msec P0.05 High Active UART I/F is enable TAIYO YUDEN 43/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 16. Power saving mode (SYSTEM OFF) 16.1Exit Power save HOST Module Power save Input Pin(P0.04 or P0.06 or P0.21) Low * P0.04 causes force initialize (see section 8.5) * P0.06 causes restarting as Central * P0.21 causes restarting as Peripheral "<CR><LF>Ver. X.X.X<CR><LF>" TAIYO YUDEN 44/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 17. Device Firmware updates (DFU) HOST Module P0.17 Low Power On P0.19 High DFU Mode Firmware image transmission ACK Complete P0.19 Low UART Baud rate : 38400 bps Data : 8 bit Parity : none Stop : 1 bit Hardware flow control : Enabled * Please contact TAIYO YUDEN when you use this function. TAIYO YUDEN 45/46 14-Sep.-2015 Ver.1.00 EYSGJNAWY-1X TAIYO YUDEN 18. Notices 1. TYSA-B Lite uses softdevice S120 V2.1.0. 2. Connection Parameter Update by GPIO (P0.17) shall be performed after 1 st update in 5 seconds from the connection establishment. 3. Connection Parameter Update by GPIO (P0.17) shall be performed in more than 2 seconds of interval. 4. The same GPIO (P0.06) is used for Both "Disconnect Request" and "Resume from Power Save". Therefore, if P0.06 is kept Low after Disconnect for more than 300ms, the module restarts as Central. See 7.7 Disconnect Request and 16.1 Exit Power save. 5. Data transmission is implemented with Notification and Write Command in GATT. Because these commands are without ACK response, TYSA-B Lite is not able to guarantee the reaching of the data. 6. The buffer size for Sleep (Section 8.6) is 128byte. If the buffer is full, further data received is discarded without any events. 7. The buffer size for Host wake-up (Chapter 12) is 128byte. If the buffer is full, further data received is discarded without any events. TAIYO YUDEN 46/46