© Semiconductor Components Industries, LLC, 2017
July, 2019 − Rev. 0
1Publication Order Number:
NVMFS5C638NL/D
NVMFS5C638NL
MOSFET – Power, Single
N-Channel
60 V, 3.0 mW, 133 A
Features
•Small Footprint (5x6 mm) for Compact Design
•Low RDS(on) to Minimize Conduction Losses
•Low QG and Capacitance to Minimize Driver Losses
•NVMFS5C638NLWF − Wettable Flank Option for Enhanced Optical
Inspection
•AEC−Q101 Qualified and PPAP Capable
•These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter Symbol Value Unit
Drain−to−Source Voltage VDSS 60 V
Gate−to−Source Voltage VGS ±20 V
Continuous Drain
Current RqJC
(Notes 1, 3) Steady
State
TC = 25°CID133 A
TC = 100°C 94
Power Dissipation
RqJC (Note 1)
TC = 25°CPD100 W
TC = 100°C 50
Continuous Drain
Current RqJA
(Notes 1, 2, 3) Steady
State
TA = 25°CID26 A
TA = 100°C 18
Power Dissipation
RqJA (Notes 1 & 2)
TA = 25°CPD4W
TA = 100°C 2
Pulsed Drain Current TA = 25°C, tp = 10 msIDM 811 A
Operating Junction and Storage Temperature TJ, Tstg −55 to
+ 175
°C
Source Current (Body Diode) IS84 A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 13 A)
EAS 180 mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL260 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL RESISTANCE MAXIMUM RATINGS
Parameter Symbol Value Unit
Junction−to−Case − Steady State RqJC 1.5 °C/W
Junction−to−Ambient − Steady State (Note 2) RqJA 40.1
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
MARKING
DIAGRAM
www.onsemi.com
XXXXXX
AYWZZ
G (4)
S (1,2,3)
N−CHANNEL MOSFET
D (5)
S
S
S
G
D
D
D
D
DFN5
(SO−8FL)
CASE 488AA
STYLE 1
1
See detailed ordering, marking and shipping information on
page 5 of this data sheet.
ORDERING INFORMATION
XXXXXX = 5C638L
XXXXXX = (NVMFS5C638NL) or
XXXXXX = 638LWF
XXXXXX = (NVMFS5C638NLWF)
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
V(BR)DSS RDS(ON) MAX ID MAX
60 V
3.0 mW @ 10 V
133 A
4.2 mW @ 4.5 V
NVMFS5C638NL
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Symbol Test Condition Min Typ Max Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA60 V
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
26 mV/°C
Zero Gate Voltage Drain Current IDSS VGS = 0 V,
VDS = 60 V
TJ = 25 °C 10
mA
TJ = 125°C 250
Gate−to−Source Leakage Current IGSS VDS = 0 V, VGS = 20 V 100 nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250 mA1.2 2.0 V
Threshold Temperature Coefficient VGS(TH)/TJ−5.0 mV/°C
Drain−to−Source On Resistance RDS(on) VGS = 10 V ID = 50 A 2.6 3.0
mW
VGS = 4.5 V ID = 50 A 3.6 4.2
Forward Transconductance gFS VDS =15 V, ID = 50 A 130 S
CHARGES AND CAPACITANCES
Input Capacitance CISS
VGS = 0 V, f = 1 MHz, VDS = 25 V
2880
pF
Output Capacitance COSS 1680
Reverse Transfer Capacitance CRSS 22
Total Gate Charge QG(TOT) VGS = 4.5 V, VDS = 48 V; ID = 50 A 18.4 nC
Total Gate Charge QG(TOT) VGS = 10 V, VDS = 48 V; ID = 50 A 40.7 nC
Threshold Gate Charge QG(TH)
VGS = 10 V, VDS = 48 V; ID = 50 A
4.5
nC
Gate−to−Source Charge QGS 8.6
Gate−to−Drain Charge QGD 3.8
Plateau Voltage VGP 3.0 V
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time td(ON)
VGS = 10 V, VDS = 48 V,
ID = 50 A, RG = 1 W
15
ns
Rise Time tr58
Turn−Off Delay Time td(OFF) 66
Fall Time tf96
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage VSD VGS = 0 V,
IS = 50 A
TJ = 25°C 0.84 1.2
V
TJ = 125°C 0.73
Reverse Recovery Time tRR
VGS = 0 V, dIs/dt = 100 A/ms,
IS = 50 A
42
ns
Charge Time ta21
Discharge Time tb22
Reverse Recovery Charge QRR 28 nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
NVMFS5C638NL
www.onsemi.com
3
TYPICAL CHARACTERISTICS
Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics
VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
VGS, GATE−TO−SOURCE VOLTAGE (V) ID, DRAIN CURRENT (A)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V)
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE
IDSS, LEAKAGE (nA)
TJ = 125°C
TJ = 25°C
TJ = −55°C
TJ = 25°C
ID = 50 A
TJ = 25°C
VGS = 10 V
VGS = 10 V
ID = 50 A
TJ = 125°C
TJ = 85°C
TJ = 150°C
3.6 V to 10 V
0
20
40
60
80
100
0 0.5 1.0 1.5 2.0
2.8 V
2
4
6
8
10
12
2 4 5 6 7 9 10 30 50 110 150
5
0
90
0.6
0.8
1.4
−50 −25 0 25 50 75 100 125 150 175
10
100
1K
100K
51525
16
18
20
4
3
2
1
10
35 45
8
VGS = 4.5 V
3.0 V
14
6
2.5
120
0
20
40
60
80
012345
100
120
1.6
1.0
1.8
2.0
3.2 V
55
3
1.2
70 130
10K
NVMFS5C638NL
www.onsemi.com
4
TYPICAL CHARACTERISTICS
Figure 7. Capacitance Variation Figure 8. Gate−to−Source Voltage vs. Total
Charge
VDS, DRAIN−TO−SOURCE VOLTAGE (V) QG, TOTAL GATE CHARGE (nC)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
RG, GATE RESISTANCE (W)VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
Figure 12. IPEAK vs. Time in Avalanche
VDS, DRAIN−TO−SOURCE VOLTAGE(V) TIME IN AVALANCHE (s)
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
t, TIME (ns)
IS, SOURCE CURRENT (A)
ID, DRAIN CURRENT (A)
IPEAK, (A)
VGS = 0 V
TJ = 25°C
f = 1 MHz
CISS
COSS
CRSS
VDS = 48 V
ID = 50 A
TJ = 25°C
QGS QGD
VGS = 10 V
VDS = 48 V
td(off)
td(on)
tf
tr
TJ = 25°CTJ = −55°C
TJ (initial) = 100°C
TJ (initial) = 25°C
RDS(on) Limit
Thermal Limit
Package Limit
10 ms
1 ms
10 ms
TC = 25°C
VGS ≤ 10 V
Single Pulse
1
100
10K
02040
0
2
4
10
0152030
1
10
111
40
0.3 0.6 0.8 0.9 1.0
1000
1 10 1000.1
100
10
1
0.1 1
10
100
0.00001 0.001 0.01
10 5
1
3
5
TJ = 125°C
VGS = 0 V
10 25
1K
0
10
30
1000
0.5 ms
0.0001
0.7
4035
10
50
6050
6
7
8
9
20
1K
100
21 31 41 0.50.4
30
NVMFS5C638NL
www.onsemi.com
5
TYPICAL CHARACTERISTICS
0.01
0.1
1
10
100
0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000
Figure 13. Thermal Characteristics
PULSE TIME (sec)
RqJA (°C/W)
Single Pulse
50% Duty Cycle
20%
10%
5%
2%
1%
DEVICE ORDERING INFORMATION
Device Marking Package Shipping†
NVMFS5C638NLT1G 5C638L DFN5
(Pb−Free)
1500 / Tape & Reel
NVMFS5C638NLWFT1G 638LWF DFN5
(Pb−Free, Wettable Flanks)
1500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
NVMFS5C638NL
www.onsemi.com
6
PACKAGE DIMENSIONS
M3.00 3.40
q0 −−−
_
3.80
12
_
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE M
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
1234
TOP VIEW
SIDE VIEW
BOTTOM VIEW
D1
E1 q
D
E
2
2
B
A
0.20 C
0.20 C
2 X
2 X
DIM MIN NOM
MILLIMETERS
A0.90 1.00
A1 0.00 −−−
b0.33 0.41
c0.23 0.28
D5.15
D1 4.70 4.90
D2 3.80 4.00
E6.15
E1 5.70 5.90
E2 3.45 3.65
e1.27 BSC
G0.51 0.575
K1.20 1.35
L0.51 0.575
L1 0.125 REF
A
0.10 C
0.10 C
DETAIL A
14
L1
e/2
8X
D2
G
E2
K
b
A0.10 B
C
0.05 cL
DETAIL A
A1
c
4 X
C
SEATING
PLANE
MAX
1.10
0.05
0.51
0.33
5.10
4.20
6.10
3.85
0.71
1.50
0.71
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
M
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.270
2X
0.750
1.000
0.905
4.530
1.530
4.5600.495
3.200
1.330
0.965
2X
2X
4X
4X
PIN 5
(EXPOSED PAD)
5.00 5.30
6.00 6.30
PITCH
DIMENSIONS: MILLIMETERS
1
RECOMMENDED
e
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
NVMFD5C638NL/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
◊
