ZB4BS1420 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications red O40 Emergency switching off pushbutton head O22 latching key release Main Range of product Harmony XB4 Product or component type Head for emergency switching off push-button Device short name ZB4 Bezel material Chromium plated metal Mounting diameter 22mm Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator mechanical latching Reset Key release Operator profile Red mushroom O 40 mm, unmarked Type of keylock Ronis 3131A Key withdrawal position Center Head type Standard Complementary CAD overall width 40mm CAD overall height 40mm CAD overall depth 79mm Net weight 0.07kg Resistance to high pressure washer 7000000Pa at 55C, distance : 0.1 m Mechanical durability 300000cycles Electrical composition code C7 for <4 contacts using single blocks in front mounting C8 for <4 contacts using single and double blocks in front mounting C11 for <3 contacts using single blocks in front mounting C15 for <1 contacts using single blocks in front mounting C10 for <4 contacts using single and double blocks in front mounting Dec 15, 2019 1 Environment Protective treatment TH Ambient air temperature for storage -40...70C Ambient air temperature for operation -40...70C Electrical shock protection class Class I conforming to IEC 61140 IP degree of protection IP66 conforming to IEC 60529 IP67 IP69 IP69K NEMA degree of protection NEMA 13 NEMA 4X NEMA 4 NEMA 12 IK degree of protection IK03 conforming to IEC 50102 Standards UL 508 EN/IEC 60947-1 EN/IEC 60947-5-4 EN/IEC 60947-5-1 JIS C8201-5-1 GB 14048.5 IEC 60364-5-53 CSA C22.2 No 14 JIS C8201-1 Product certifications DNV LROS (Lloyds register of shipping) CSA UL listed GL BV RINA Vibration resistance 5 gn (f= 2...500Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27 Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information Contractual warranty Warranty 2 18 months Product data sheet Dimensions Drawings ZB4BS1420 Dimensions 3 Product data sheet Mounting and Clearance ZB4BS1420 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) (4) (5) (6) 4 Connection by Faston Connectors Diameter on finished panel or support 40mm min. / 1.57in. min. 30mm min. / 1.18in. min. +0.4 +0.016 O 22.5mm / 0.89in. recommended (O 22.3mm 0 / 0.88in. 0 ) 45mm min. / 1.78in. min. 32mm min. / 1.26in. min. Product data sheet Mounting and Clearance ZB4BS1420 Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30mm min. / 1.18in. min. 40mm min. / 1.57in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30mm min. 40mm min. 5 Dimensions in in. A: B: 1.18in. min. 1.57in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3mm / 0.012in: T1 + T2 = 0.3mm max. Installation Precautions Minimum thickness of circuit board: 1.6mm / 0.06in. Cut-out diameter: 22.4mm 0.1 / 0.88in. 0.004 Orientation of body/fixing collar ZB4BZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max. Allow for one ZB4BZ079 fixing collar/pillar and its fixing screws: every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y). with each selector switch head (ZB4BD*, ZB4BJ*, ZB4BG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) (2) Panel Printed circuit board 6 Mounting of Adapter (Socket) ZBZ01* 1 2 elongated holes for ZBZ006 screw access 2 1 hole O 2.4mm 0.05 / 0.09in. 0.002 for centring adapter ZBZ01* 3 8 x O 1.2mm / 0.05in. holes 4 1 hole O 2.9mm 0.05 / 0.11in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4mm / 0.09in. for clipping in adapter ZBZ01* Dimensions An + 18.1 relate to the O 2.4mm 0.05 / 0.09in. 0.002 holes for centring adapter ZBZ01*. 7 Product data sheet Technical Description ZB4BS1420 Electrical Composition Corresponding to Code C7 8 Product data sheet Technical Description ZB4BS1420 Electrical Compositions Corresponding to Code C8 9 Product data sheet Technical Description ZB4BS1420 Electrical Compositions Corresponding to Code C10 10 Product data sheet Technical Description ZB4BS1420 Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 11 Product data sheet Technical Description ZB4BS1420 Electrical Composition Corresponding to Code C15 1 N/O 1 N/C 1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C 12 Product data sheet Technical Description ZB4BS1420 Legend Single contact Double contact Light block Possible location ZB4BS1420 may be replaced by any of the following products: Heads ZB4BS944 red O40 Emergency stop, switching off head O22 trigger and latching key release Qty 1 Reason for Substitution: End of life | Substitution date: 17 September 2013 | 05/13/14 Heads ZB4BS94420 red O40 Emergency stop, switching off head O22 trigger and latching key release Qty 1 Reason for Substitution: End of life | Substitution date: 17 September 2013 | 09/17/13 13