MF-NSMF012 - BOURNS - Datasheet.Live

Features

n Compliant with AEC-Q200 Rev-D Stress

Test Qualiﬁcation for Passive Components

in Automotive Applications

n Compact design to save board space -

1206 footprint

n Small size results in very fast time to react

to fault events

n Symmetrical design

n Low proﬁle

n RoHS compliant* and halogen free**

n Agency recognition:

MF-NSMF Series - PTC Resettable Fuses

*RoHS COMPLIANT

& AEC APPROVED

*RoHS COMPLIANT, **HALOGEN FREE

& AEC COMPLIANT

*RoHS and

AEC-Q200 COMPLIANT

LEAD FREE

*RoHS COMPLIANT

VERSIONS

AVAILABLE

LEAD FREE

VERSIONS ARE

RoHS COMPLIANT*

Electrical Characteristic

Model V max.

Volts

I max.

Amps

Ihold Itrip Resistance Max. Time

To Trip

Tripped

Power

Dissipation Certications

Amperes

at 23 °C Ohms

at 23 °C Amperes

at 23 °C Seconds

at 23 °C Watts

at 23 °C cUL TÜV

Hold Trip RMin. R1Max. Typ. E174545 R 50256634

MF-NSMF012 30.0 10 0.12 0.29 1.35 8.50 1.0 0.20 0.6 3 3

MF-NSMF016 30.0 10 0.16 0.37 0.70 6.00 1.0 0.30 0.6 3 3

MF-NSMF020 24.0 10 0.20 0.46 0.60 2.60 1.0 0.60 0.6 3 3

MF-NSMF020X 30.0 60 0.20 0.40 0.60 3.30 1.0 0.60 0.6 3 3

MF-NSMF025X 16.0 20 0.25 0.50 0.45 2.30 8.0 0.08 0.6 3 3

MF-NSMF035 6.0 100 0.35 0.75 0.30 1.20 8.0 0.10 0.6 3 3

MF-NSMF035X 16.0 20 0.35 0.75 0.30 1.40 3.5 0.14 0.6 3 3

MF-NSMF050 13.2 100 0.50 1.00 0.15 0.70 8.0 0.10 0.6 3 3

MF-NSMF075 6.0 100 0.75 1.50 0.10 0.40 8.0 0.20 0.6 3 3

MF-NSMF110 6.0 100 1.10 2.20 0.06 0.20 8.0 0.10 0.6 3 3

MF-NSMF150 6.0 100 1.50 3.00 0.03 0.13 8.0 0.30 0.6 3 3

MF-NSMF200 6.0 100 2.00 4.00 0.02 0.085 8.0 1.00 0.7 3 3

Environmental Characteristics

Operating Temperature ......................................... -40 °C to +85 °C

Recommended Storage........................................ +40 °C max, 70 % R.H. max.

Passive Aging ....................................................... +85 °C, 1000 hours ............................................... ±5 % typical resistance change

Humidity Aging...................................................... +85 °C, 85 % R.H. 1000 hours ............................. ±5 % typical resistance change

Thermal Shock ..................................................... -40 °C to +85 °C, 20 times .................................... ±10 % typical resistance change

Solvent Resistance ............................................... MIL-STD-202, Method 215 ................................... No change (marking still legible)

Vibration ............................................................... MIL-STD-883C, Method 2007.1, ........................... No change (Rmin < R < R1max)

Condition A

Moisture Sensitivity Level (MSL) .......................... See Note

ESD Classication - HBM ..................................... 6

* RoHS Directive 2015/863, Mar 31, 2015 and Annex.

**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)

and Chlorine (Cl) content is 1500 ppm or less.

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Test Procedures And Requirements

Test Test Conditions Accept/Reject Criteria

Visual/Mech. Verify dimensions and materials Per MF physical description

Resistance ............................................................ In still air @ 23 °C ................................................. Rmin ≤ R ≤ R1max

Time to Trip ........................................................... At specied current, Vmax, 23 °C ......................... T ≤ max. time to trip (seconds)

Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip

Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning

Trip Endurance ..................................................... Vmax, 48 hours ..................................................... No arcing or burning

Solderability .......................................................... 245 °C ±5 °C, 5 seconds ...................................... 95 % min. coverage

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Applications

n USB port protection - USB 2.0, 3.0 & OTG

n HDMI 1.4 Source protection

n PC motherboards - Plug and Play

protection

n Mobile phones - Battery and port protection

n PDAs / digital cameras

n Game console port protection

Thermal Derating Chart - Ihold (Amps)

Model Ambient Operating Temperature

-40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C

MF-NSMF012 0.19 0.17 0.15 0.12 0.11 0.10 0.09 0.08 0.07

MF-NSMF016 0.21 0.20 0.18 0.16 0.14 0.13 0.12 0.11 0.09

MF-NSMF020 0.30 0.27 0.24 0.20 0.18 0.16 0.14 0.12 0.11

MF-NSMF020X 0.30 0.27 0.24 0.20 0.18 0.16 0.14 0.12 0.10

MF-NSMF025X 0.39 0.35 0.31 0.25 0.23 0.21 0.18 0.16 0.13

MF-NSMF035 0.51 0.46 0.40 0.35 0.30 0.27 0.24 0.22 0.18

MF-NSMF035X 0.51 0.46 0.40 0.35 0.30 0.27 0.24 0.22 0.18

MF-NSMF050 0.76 0.68 0.59 0.50 0.44 0.40 0.35 0.32 0.26

MF-NSMF075 1.11 1.00 0.85 0.75 0.67 0.61 0.52 0.50 0.42

MF-NSMF110 1.64 1.46 1.30 1.10 0.92 0.83 0.80 0.65 0.52

MF-NSMF150 2.20 1.99 1.77 1.50 1.34 1.23 1.10 1.01 0.84

MF-NSMF200 2.88 2.61 2.28 2.00 1.80 1.66 1.51 1.39 1.19

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their

speciﬁc applications.

The products described herein and this document

are subject to speciﬁc legal disclaimers as set

forth on the last page of this document, and at

www.bourns.com/docs/legal/disclaimer.pdf.

MF-NSMF Series - PTC Resettable Fuses

Typical Time to Trip at 23 ˚C

0.01

0.001

0.1 110 100

0.1

100

Fault Current (Amps)

Time to Trip (Seconds)

MF-NSMF012

MF-NSMF110

MF-NSMF200

MF-NSMF035

MF-NSMF050

MF-NSMF075

MF-NSMF016

MF-NSMF025X

MF-NSMF020

MF-NSMF150

The Time to Trip curves represent typical performance of a device in a simulated application

environment. Actual performance in specic customer applications may differ from these values due

to the inuence of other variables.

How to Order

MF - NSMF 020 X - 2

Multifuse® Product

Designator

Series

NSMF = 1206 Surface Mount

Component

Hold Current, Ihold

012-200 (0.12 Amps - 2.00 Amps)

Options

__ = Standard

X = Multifuse® freeXpansion Design™

Packaging

-2 = Tape and Reel

Packaged per EIA 481

Typical Part Marking

Represents total content. Layout may vary.

STYLE 1 PART

IDENTIFICATION:

MF-NSMF012 = 0

MF-NSMF016 = 1

MF-NSMF020 = 2

MF-NSMF035 = 3

MF-NSMF050 = 4

MF-NSMF075 = 5

MF-NSMF110 = 6

MF-NSMF150 = 8

MF-NSMF200 = A

BIWEEKLY DATE CODE WILL APPEAR ON THE

PACKAGING LABEL:

WEEK 1 AND 2 = A

WEEK 51 AND 52 = Z

STYLE 2 PART

IDENTIFICATION:

MF-NSMF020X = 2

MF-NSMF025X = C

MF-NSMF035X = 3

MF-NSMF Series - PTC Resettable Fuses

Top and Bottom View Side View

Top View

Style 2

Style 1

Bottom View Side View Recommended Pad Layout

1.6 ± 0.10

(.063 ± .004)

2.0 ± 0.10

(.079 ± .004)

Recommended Pad Layout

1.6 ± 0.1

(0.063 ± .004)

2.0 ± 0.1

(.079 ± .004)

1.0 ± 0.05

(.039 ± .002)

1.0 ± 0.05

(.039 ± .002)

1.0 ± 0.05

(.039 ± .002)

Product Dimensions

DIMENSIONS: MM

(INCHES)

Model A B C D Style

Min. Max. Min. Max. Min. Max. Min.

MF-NSMF012 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.70

(0.028)

1.10

(0.043)

0.25

(0.010) 1

MF-NSMF016 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.48

(0.019)

0.85

(0.033)

0.25

(0.010) 1

MF-NSMF020 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.48

(0.019)

0.85

(0.033)

0.25

(0.010) 1

MF-NSMF020X 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.40

(0.016)

0.85

(0.033)

0.25

(0.010) 2

MF-NSMF025X 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.40

(0.016)

0.85

(0.033)

0.25

(0.010) 2

MF-NSMF035 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.48

(0.019)

0.85

(0.033)

0.25

(0.010) 1

MF-NSMF035X 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.40

(0.016)

0.85

(0.033)

0.25

(0.010) 2

MF-NSMF050 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.48

(0.019)

0.85

(0.033)

0.25

(0.010) 1

MF-NSMF075 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.40

(0.016)

0.70

(0.028)

0.25

(0.010) 1

MF-NSMF110 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.40

(0.016)

0.70

(0.028)

0.25

(0.010) 1

MF-NSMF150 3.00

(0.118)

3.40

(0.134)

1.40

(0.055)

1.80

(0.071)

0.40

(0.016)

0.70

(0.028)

0.25

(0.010) 1

MF-NSMF200 3.00

(0.118)

3.50

(0.138)

1.40

(0.055)

1.80

(0.071)

0.70

(0.028)

1.60

(0.063)

0.25

(0.010) 1

Terminal material:

Electroless Ni under immersion Au

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

MF-NSMF Series - PTC Resettable Fuses

3000 pcs. per reel

Packaging Quantity

“freeXpansion Design” is a trademark of Bourns, Inc.

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

MF-NSMF Series - PTC Resettable Fuses

MF-NSMF SERIES, REV. Y, 04/19

MF-NSMF Series - PTC Resettable Fuses

Solder Reow Recommendations

Notes:

• MF-NSMF models are intended for reow soldering (including, but not

limited to heating plate, hot air, IR, nitrogen, and vapor phase).

• Wave soldering is permissible only if the device is on the top of the

PCB, opposite the heat source.

• Hand soldering is not recommended for these devices.

• All temperatures refer to the topside of the device, measured on the

device body surface.

• If reow temperatures exceed the recommended prole, devices may

not meet the published specications.

• Compatible with Pb and Pb-free solder reow proles.

• Excess solder may cause a short circuit.

• Please refer to the Multifuse® Polymer PTC Resettable Fuse Soldering

Recommendations for more details.

Temperature of Lead/Pad Junction

Process Materials Temperature Time

Description Interval

1. Apply solder paste to • Sn 96.5 / Ag 3.0 / Cu 0.5 Room temperature

test board (8 - 10 mil thick) Alloy water soluble or no

clean solder paste

(see note 1)

• single sided epoxy glass

(G10) (UL approved)

•PC board approx. 4x4x.06 in.

2. Place test units onto board 6 units/board

3. Ramp up Convection oven (see note 2) 2.5 °C ± 0.5 °/sec.

4. Preheat (TS.ces 03 ± 09C° 091 ot C° 051)

5. Time above liquidus (TL.ces 09-06C° 022)

6. Peak temperature (TP° 5-/° 0+ C° 052)

10-20 sec. within

5 °C of peak

.ces/C° 5.0 ± C° 3erutarepmet mooRnwod pmaR.7

(see note 2)

8. Cleaning water clean profile High pressure deionized 72 °F to 160 °F As required

water 65 PSI max. (22 °C to 71 °C)

Inspect solder joint to determine if solder joint is

acceptable (i.e. exhibits wetting of joint’s surface).

Use the following criteria (ref. acceptability of printed

board assemblies, IPC-A-610):

A) Acceptable (see Figure 1)

(1) The solder connection wetting angle (solder to

component and solder to PCB termination)

does not exceed 90 °.

(2) Solder balls that do not violate minimum

electrical clearances and are attached

(soldered) to a metal surface.

B) Unacceptable (see Figure 2)

(1) Solder connection wetting angle exceeding

90 °.

(2) Incomplete reflow of solder paste.

(3) Dewetting.

If unacceptable, determine cause and correct prior to

next run.

NOTES:

1. Water soluble solder paste only above 100K.

2. Refer to ref. temperature profile. Temperature at

lead/pad junction with “K” type thermocouple.

3. Units that are board mounted for environmental

testing must see a peak temperature in the reflow

zone, as specified. This is to ensure that all test

units will see “worst case conditions”.

4. Ramp down rate to be measured from 245 °C to

150 °C.

5. Process Description 8 does not apply to open

frame trimmers.

(Derived using 6-zone Convection Oven)

T TO

RAMP-UP L

Ts max

Ts min

PREHEAT

Temperature

Time

CRITICAL ZONE

RAMP-DOWN

t 25 °C TO PEAK

Prole Feature Pb-Free Assembly

Average Ramp-Up Rate (Tsmax to Tp) 3 °C / second max.

PREHEAT:

Temperature Min. (Tsmin)

Temperature Max. (Tsmax)

Time (Tsmin to Tsmax) (ts)

150 °C

200 °C

60~180 seconds

TIME MAINTAINED ABOVE:

Temperature (TL)

Time (tL)

217 °C

60~150 seconds

Peak Temperature (Tp) 260 °C

Time within 5 °C of Actual Peak Temperature (tp) 20~40 seconds

Ramp-Down Rate 6 °C / second max.

Time 25 °C to Peak Temperature 8 minutes max.

DIMENSIONS: MM

(INCHES)

MF-NSMF020X,

MF-NSMF012 MF-NSMF016 ~ MF-NSMF075 ~ MF-NSMF025X

& MF-NSMF200 MF-NSMF050 MF-NSMF150 & MF-NSMF035X

Tape Dimensions per EIA 481 per EIA 481 per EIA 481 per EIA 481

W 8.0 ± 0.30 8.0 ± 0.30 8.0 ± 0.30 8.0 ± 0.30

(0.315 ± 0.012) (0.315 ± 0.012) (0.315 ± 0.012) (0.315 ± 0.012)

P0 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10

(0.157 ± 0.004) (0.157 ± 0.004) (0.157 ± 0.004) (0.157 ± 0.004)

P1 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10

(0.157 ± 0.004) (0.157 ± 0.004) (0.157 ± 0.004) (0.157 ± 0.004)

P2 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05

(0.079 ± 0.002) (0.079 ± 0.002) (0.079 ± 0.002) (0.079 ± 0.002)

A0 1.90 ± 0.10 1.90 ± 0.10 1.90 ± 0.10 1.90 ± 0.10

(0.075 ± 0.004) (0.075 ± 0.004) (0.075 ± 0.004) (0.075 ± 0.004)

B0 3.50 ± 0.10 3.45 ± 0.10 3.45 ± 0.10 3.55 ± 0.10

(0.138 ± 0.004) (0.136 ± 0.004) (0.136 ± 0.004) (0.140 ± 0.004)

B1 max. 4.35 4.35 4.35 4.35

(0.171) (0.171) (0.171) (0.171)

D0 1.5 + 0.10/-0.0 1.5 + 0.10/-0.0 1.5 + 0.10/-0.0 1.5 + 0.10/-0.0

(0.059 + 0.004/-0) (0.059 + 0.004/-0) (0.059 + 0.004/-0) (0.059 + 0.004/-0)

F 3.5 ± 0.05 3.5 ± 0.05 3.5 ± 0.05 3.5 ± 0.05

(0.138 ± 0.002) (0.138 ± 0.002) (0.138 ± 0.002) (0.138 ± 0.002)

E1 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10

(0.069 ± 0.004) (0.069 ± 0.004) (0.069 ± 0.004) (0.069 ± 0.004)

E2 min. 6.25 6.25 6.25 6.25

(0.246) (0.246) (0.246) (0.246)

T max. 0.6 0.6 0.6 0.6

(0.024) (0.024) (0.024) (0.024)

T1 max. 0.1 0.1 0.1 0.1

(0.004) (0.004) (0.004) (0.004)

K0 1.35 ± 0.10 1.04 ± 0.10 0.85 ± 0.10 0.80 ± 0.10

(0.053 ± 0.004) (0.041 ± 0.004) (0.033 ± 0.004) (0.032 ± 0.004)

Leader min. 390 390 390 390

(15.35) (15.35) (15.35) (15.35)

Trailer min. 160 160 160 160

(6.30) (6.30) (6.30) (6.30)

Reel Dimensions

A max. 185 185 185 185

(7.28) (7.28) (7.28) (7.28)

N min. 50 50 50 50

(1.97) (1.97) (1.97) (1.97)

W1 8.4 + 1.5/-0.0 8.4 + 1.5/-0.0 8.4 + 1.5/-0.0 8.4 + 1.5/-0.0

(0.331 + 0.059/-0.0) (0.331 + 0.059/-0.0) (0.331 + 0.059/-0.0) (0.331 + 0.059/-0.0)

W2 max. 14.4 14.4 14.4 14.4

(0.567) (0.567) (0.567) (0.567)

MF-NSMF Series Tape and Reel Specications

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

N(HUB DIA.)

(MEASURED

AT HUB)

COVER

TAPE

T1A0

(MEASURED

AT HUB)

D0P2

DIMENSIONS: MM

(INCHES)

3312 - 2 mm SMD Trimming Potentiometer

Application Notice

MFAN 12/18

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Bourns® Multifuse® PPTC Resettable Fuses

• Users are responsible for independent and adequate evaluation of Bourns® Multifuse® Polymer PTC devices in the user’s

application, including the PPTC device characteristics stated in the applicable data sheet.

• Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such

maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or re. Circuits with

inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated

within the user’s application during the PTC selection and qualication process.

• Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature

conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions

are expected to be repetitive or prolonged.

• In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC

device must be protected against mechanical stress, and must be given adequate clearance within the user’s application to

accommodate such thermal expansion. Rigid potting materials or xed housings or coverings that do not provide adequate

clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC

devices if the thermal expansion is inhibited.

• Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may

adversely affect the performance of polymer PTC devices.

• Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating,

potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene,

which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be

thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect

on the device.

• Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data

sheet and on the Multifuse® Polymer PTC Moisture/Reow Sensitivity Classication (MSL) note:

https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf

Legal Disclaimer Notice

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its

afliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change

without notice. Users should check for and obtain the latest relevant information and verify that such information is current and

complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary

from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components

in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®

product also can and do vary in different applications and actual performance may vary over time. Users should always verify

the actual performance of the Bourns® product in their specic devices and applications, and make their own independent

judgments regarding the amount of additional test margin to design into their device or application to compensate for

differences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry

standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any

failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users of

Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their

devices or applications.

Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-

plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or

environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives on a

case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s

sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III devices and

generally equivalent classications outside of the United States.

Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive

application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns

expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment

or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®

standard product is considered for potential use in automotive applications, it should only be used in such sub-category of

automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard

or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally

or any other generally equivalent governmental organization standard applicable to products designed or manufactured for

use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft

or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically

approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard

product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the

user’s sole risk.

The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and

the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the

user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply

to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the

design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use

Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions

apply to all uses and applications that violate national or international prohibitions, including embargos or international

regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior

authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible

to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,

incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties

of tness for particular purpose, non-infringement and merchantability.

For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese

bilingual versions are available at:

Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

C1753 05/17/18R