T93 Vishay Sfernice 3/8" Square Multi-Turn Cermet Trimmers FEATURES * Industrial Grade RoHS * 0.5 Watt at 70 C COMPLIANT * Tests according to CECC 41 000 The T93 is a small size trimmer - 3/8" x 3/8" x 3/16" - answering PC board mounting requirements. Five versions are available which differ by the position of the control screw in relation to the PC board plane and by the spacing of the terminals. Excellent operational stability is provided by the use of a cermet element. * Contact resistance variation < 1 % typical * Lead (Pb)-free and RoHS compliant DIMENSIONS in millimeters 9.8 max T93XA Terminal Spacing on a 2.54 PCB 5 max 51 2.3 0.2* a b c 2.54 2.54 9.7 max a b c o 0.5 1.3 slot 0.6 x 0.6 0.5 o 2.2 7.9 0.2 9.8 max 0.6 0.2* T93XB 2.54 51 a b c 2.54* 2.54* 1.2 0.2 5 max a b c 9.7 max o 0.5 1.3 0.5 o 2.2 slot 0.6 x 0.6 1.2 0.2 7.9 0.2 1.2 0.1 T93YA 2.3 0.2* 1.3 9.8 max 51 1.6 0.1 o 2.2 2.54* 2.54* a b c 9.7 max a b c o 0.5 slot 0.6 x 0.6 0.5 T93YB 0.6 0.2* 1.3 9.8 max 5 max 1.2 0.1 51 2.54 1.6 0.1 o 2.2 2.54* 2.54* a b c 9.7 max o 0.5 a b c slot 0.6 x 0.6 5 max 0.5 T93Z 4.8 0.2* 5.2 max 51 2.54* slot 0.6 x 0.6 c b a 9.7 max 2.54* 2.54* o 2.2 c b a o 0.5 Base level 0.5 1.3 1.3 0.1 1.2 0.1 9.7 max CIRCUIT DIAGRAM * to be measured at base level a c (1) (3) b (2) cw Tolerance unless otherwise specified 0.5 Document Number: 51026 Revision: 25-Apr-06 For technical questions, contact: sfer@vishay.com See also: Application notes www.vishay.com 73 T93 Vishay Sfernice 3/8" Square Multi-Turn Cermet Trimmers ELECTRICAL SPECIFICATIONS Resistive Element cermet Electrical Travel 21 turns 2 Resistance Range 10 to 2.2 M Standard series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 Tolerance Standard 10 % On Request Power Rating 5% Linear 0.5 W at + 70 C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Table Limiting Element Voltage (Linear Law) 250 V 2 % Rn or 2 Contact Resistance Variation End Resistance (Typical) 1 Dielectric Strength (RMS) 1000 V Insulation Resistance (500 VDC) 106 M Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Net Weight Wiper (actual travel) POWER RATING CHART 23 turns 5 1.5 clutch action Approx. 0.82 g Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 C to + 155 C 55/125/56 fully sealed container IP67 0.5 POWER IN WATT MECHANICAL SPECIFICATIONS 0 0 50 25 70 100 155 125 AMBIENT TEMPERATURE IN DEGREES CELSIUS PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS Load Life Climatic Sequence Long Term Damp Heat Rapid Temperature Change Shock Vibration Rotational Life www.vishay.com 74 CONDITIONS 1000 hours at rated power 90'/30' - ambient temp. 70 C Phase A dry heat 125 C - 30 % Pr Phase B damp heat Phase C cold - 55 C Phase D damp heat 5 cycles 56 days 40 C, 93 % RH 1% 2% Contact res. variation: < 1 % Rn 0.5 % 1% 0.5 % 1% Dielectric strength: 1000 V RMS Insulation resistance: > 104 M 5 cycles - 55 C at + 125 C 0.5 % 50 g at 11 m secs 3 successive shocks in 3 directions 0.1 % 10 - 55 Hz 0.75 mm or 10 g during 6 hours 0.1 % 200 cycles R1-2 (%) R1-2 RT (%) RT V1-2 V1-3 1% 0.2 % V1-2 V1-3 0.2 % 4% Contact res. variation: < 1 % Rn For technical questions, contact: sfer@vishay.com See also: Application notes Document Number: 51026 Revision: 25-Apr-06 T93 Vishay Sfernice 3/8" Square Multi-Turn Cermet Trimmers MARKING STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. POWER AT 70 C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER W V mA 10 0.5 ppm/C 2.2 224 22 3.3 150 0 47 4.8 103 + 200 100 7 70 220 10.5 47 470 15.3 32 1K 22.4 22 2.2K 33.2 15 4.7K 48.5 10 10K 70.7 7 22K 105 4.8 47K 153 3.2 100K 0.5 224 2.2 220K 0.28 250 1.1 470K 0.13 250 0.53 1M 0.06 250 0.25 2.2M 0.028 250 0.11 Printed: - VISHAY trademark - model - style - ohmic value (in , k, M) - tolerance (in %) - manufacturing date - marking of terminal 3 TCR - 55 C + 125 C 100 PACKAGING - In magazine pack by 50 pieces (tube) code "TU50". ORDERING INFORMATION T93 MODEL XA VERSION 220 k OHMIC VALUE 10 % TOLERANCE TU50 PACKAGING e3 LEAD FINISH TU50 : Tube e3: pure Sn SAP PART NUMBERING GUIDELINES T 9 MODEL 3 X A 2 STYLE 2 OHMIC VALUE 4 K TOL T 2 PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51026 Revision: 25-Apr-06 For technical questions, contact: sfer@vishay.com See also: Application notes www.vishay.com 75 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1