https://www.phoenixcontact.com/us/products/2964678 Solid-state relay terminal block - DEK-OE-230AC/ 48DC/100/SO 46 - 2964678 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Solid-state relay interface designed to prevent interference on the control side, input: 230 V AC, output: 48 V DC/100 mA Product Features Use of AC output cards, resulting in residual AC currents Resistant to interference currents Applications with long control lines High relay release voltage Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 25.07 GRM Custom tariff number 85364900 Country of origin China Technical data Dimensions Width 6.2 mm Height 80 mm Depth 56 mm Ambient conditions Ambient temperature (operation) 0 C ... 50 C Ambient temperature (storage/transport) 0 C ... 70 C Input data 12/9/13 Page 1 / 5 https://www.phoenixcontact.com/us/products/2964678 Solid-state relay terminal block - DEK-OE-230AC/ 48DC/100/SO 46 - 2964678 Technical data Input data Nominal input voltage UN 230 V AC Input voltage range in reference to UN 0.9 ... 1.1 Switching threshold "0" signal, voltage 92 V AC Switching threshold "1" signal voltage > 207 V AC Typical input current at UN 2.5 mA Typical response time 4.4 ms Typical turn-off time 14 ms Operating voltage display Yellow LED Type of protection Surge protection RC element Protective circuit/component Varistor RC element Transmission frequency 5 Hz Output data Output voltage range 3 V DC ... 48 V DC Limiting continuous current 100 mA Voltage drop at max. limiting continuous current 0.9 V Output circuit 3-conductor, ground-referenced Type of protection Protection against polarity reversal Free running Protective circuit/component Polarity protection diode Damping diode Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 4 mm Conductor cross section stranded min. 0.2 mm Conductor cross section stranded max. 2.5 mm Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 General Test voltage input/output 2.5 kV AC 12/9/13 Page 2 / 5 https://www.phoenixcontact.com/us/products/2964678 Solid-state relay terminal block - DEK-OE-230AC/ 48DC/100/SO 46 - 2964678 Technical data General 2.5 kV AC Mounting position any Assembly instructions In rows with zero spacing Operating mode 100% operating factor Standards/regulations IEC 60664 EN 50178 IEC 62103 Rated surge voltage / insulation Basic insulation Pollution degree 2 Surge voltage category III Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 ETIM 5.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39121542 12/9/13 Page 3 / 5 https://www.phoenixcontact.com/us/products/2964678 Solid-state relay terminal block - DEK-OE-230AC/ 48DC/100/SO 46 - 2964678 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST Accessories Accessories Partition plate Separating plate - D-DEK 1,5 GN - 2716949 Cover for setting the end of a terminal row, color: green Drawings 12/9/13 Page 4 / 5 https://www.phoenixcontact.com/us/products/2964678 Solid-state relay terminal block - DEK-OE-230AC/ 48DC/100/SO 46 - 2964678 Circuit diagram A1 + A A2 0 (c) Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/9/13 Page 5 / 5