1N4151
www.vishay.com Vishay Semiconductors
Rev. 1.8, 16-Jul-12 1Document Number: 85523
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Fast Switching Diodes
MECHANICAL DATA
Case: DO-35
Weight: approx. 125 mg
Cathode band color: black
Packaging codes/options:
TR/10K per 13" reel (52 mm tape), 50K/box
TAP/10K per ammopack (52 mm tape), 50K/box
FEATURES
Silicon epitaxial planar diode
AEC-Q101 qualified
Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Extreme fast switches
PARTS TABLE
PART ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS
1N4151 1N4151-TR or 1N4151-TAP 1N4151 Single diode Tape and reel/ammopack
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Repetitive peak reverse voltage VRRM 75 V
Reverse voltage VR50 V
Peak forward surge current tp = 1 μs IFSM 2A
Repetitive peak forward current IFRM 500 mA
Forward continuous current IF300 mA
Average forward current VR = 0 IF(AV) 150 mA
Power dissipation l = 4 mm, TL = 45 °C Ptot 440 mW
l = 4 mm, TL 25 °C Ptot 500 mW
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to ambient air l = 4 mm, TL = constant RthJA 350 K/W
Junction temperature Tj175 °C
Storage temperature range Tstg - 65 to + 175 °C
1N4151
www.vishay.com Vishay Semiconductors
Rev. 1.8, 16-Jul-12 2Document Number: 85523
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Reverse Current vs. Junction Temperature
Fig. 2 - Forward Current vs. Forward Voltage
Fig. 3 - Diode Capacitance vs. Reverse Voltage
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Forward voltage IF = 50 mA VF880 1000 mV
Reverse current VR = 50 V IR14 50 nA
VR = 50 V, Tj = 150 °C IR50 μA
Breakdown voltage IR = 5 μA V(BR) 75 V
Diode capacitance VR = 0 V, f = 1 MHz,
VHF = 50 mV CD2pF
Reverse recovery time
IF = IR = 10 mA,
iR = 1 mA trr 4ns
IF = 10 mA, VR = 6 V,
iR = 0.1 x IR, RL = 100 trr 2ns
0 40 80 120 160
0.01
0.1
1
10
100
I-Reverse Current (µA)
R
Tj-Junction Temperature (°C)
200
94 9151
VR=50V
Scattering Limit
0 0.4 0.8 1.2 1.6
0.1
1
10
100
1000
I- Forward Current (mA)
F
V- Forward Voltage (V)
2.0
94 9152 F
T = 25 °C
j
T = 100 °C
j
0.1 1 10
0
0.5
1.0
1.5
2.0
3.0
C - Diode Capacitance (pF)
D
VR-Reverse Voltage (V)
100
94 9153
2.5 f=1MHz
Tj= 25 °C
1N4151
www.vishay.com Vishay Semiconductors
Rev. 1.8, 16-Jul-12 3Document Number: 85523
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): DO-35
94 9366
Rev. 6 - Date: 19. December 2011
Document no.: SB-V-3906.04-031(4)
26 min. [1.024] 3.9 max. [0.154] 26 min. [1.024]
Cathode Identication
1.7 [0.067]
1.3 [0.050]
3.1 min. [0.120]
Ø 0.6 max. [0.024]
Ø 0.4 min. [0.015]
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.