Very low noise Minimal depth in enclosure Functional design Time-saving installation High level shielding EMI + Standard Filter Fan FF 018 3 3 4 4 2 2 1 The newly developed filter fan design serves three functions: ! ! ! Easy mounting for axial fan High air flow High EMI screening: numerous integrally molded contact springs hinder electromagnetic interference fields originating from within the cabinet or penetrating from outside. The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet. A spring contact strip on the EMI version additionally forms a continuous conductive connection between the cabinet cut-out and the mounting frame. Time-saving assembly and maintenance The necessary cut-out in the cabinet is effectively sealed against high frequency radiation directly on the line of the cabinet wall. STEGO's new filter fan is easily connected and installed from outside the cabinet. The functional design of the intake and exhaust fan hoods very effectively prevents direct infiltration of falling water and dust. 1 When using the EMI version, only the cut edge of the cabinet opening must be paint-free. The advantage: quick and reliable removal of the paint layer and no damage to the cabinet sides. Air channeling makes the filter fan particularly quiet in operation. 2 Remove protective film from the sealing strips on the mounting frame and press into the cabinet opening. The frame stays permanently in the cabinet. 3 Electrically connect the axial fan using the clip connectors and push the unit into the mounting frame. Affix using screws. 4 Insert the filter mat in the hood. Clip hood on. Finished. Schirmdampfungsmessung bis 10 GHz Shielding measurement up to 10GHz nach NSA 65 -6 according to NSA 65 - 6 Schirmdampfung Shielding in dBin dB 120 EMV-Filterlufter 01802.1-00 EMI-Filter fan 01802.1-00 EMI-Filter fan 01801.1-00 EMV-Filterlufter 01801.1-00 EMI-Filter fan 01800.1-00 EMV-Filterlufter 01800.1-00 100 80 60 40 20 0 1 10 100 1000 FrequencyininMHz MHz Frequenz U.S. Patent No. 6,699,301 B1 STEGO, Inc. * 2270 Northwest Parkway * Suite 170 * Marietta, GA 30067 * Tel: (770) 984-0858 * Fax: (770) 984-0615 Toll free: 1-888-783-4611 (US & Canada only) * www.stegousa.com 10000 8.9" 8.2" 3.4" 6.9" 6.7" 5.3" 2.0" 6.2" 4.9" 1.6" 2.3" 5.1" 3.8" FILTER FAN FF 018 Series 1.4" 1.8" Standard EMI Version Standard EMI Version Standard EMI Version Part No. AC 230 V, 50 Hz: 01800.0-00 01800.1-00 01801.0-00 01801.1-00 01802.0-00 01802.1-00 Part No. AC 120 V, 60 Hz: 01800.0-01 01800.1-01 01801.0-01 01801.1-01 01802.0-01 01802.1-01 Filter mat: Medium grade 350 g/m, filtering degree 94%, Particle O < 10 m, G4 (EN 779) Air volume free blowing: 12 cfm (21 m/h) 35 cfm (60 m/h) 60 cfm (102 m/h) with exit filter: 9 cfm (16 m/h) 24 cfm (42 m/h) 40 cfm (68 m/h) Current consumption 230 V: 80 mA 100 mA 100 mA 120 V: 160 mA 180 mA 180 mA Power consumption 230 V: 13W 15W 15W 120 V: 13W 15W 15W Average noise level at 3 ft DIN EN ISO 9614-2: 31 dB (A) 40 dB (A) 39 dB (A) Mounting depth: 1.8" (45 mm) 2.3" (58 mm) 3.4" (86 mm) Enclosure cut-out: 3.8" x 3.8" (97 x 97 mm +0.4) 4.9" x 4.9" (125 x 125 mm +0.4) 6.9" x 6.9" (176 x 176 mm +0.4) Weight: 1.2 lbs (0.54 kg) 2.2 lbs (1.0 kg) 4.2 lbs (1.9 kg) Air flow increases by approximately 15% for 120V / 60Hz models EXHAUST FILTER EF 118 Series Standard 11800.0-00 EMI Version Standard EMI Version Standard EMI Version 11800.1-00 11801.0-00 11801.1-00 11802.0-00 11802.1-00 350 g/m, filtering degree 94%, Particle O < 10 m, G4 (EN 779) 0.6" (16 mm) 0.6" (16 mm) 0.6" (16 mm) 3.8" x 3.8" (97 x 97 mm +0.4) 4.9" x 4.9" (125 x 125 mm +0.4) 6.9" x 6.9" (176 x 176 mm +0.4) 0.6 lbs (0.27 kg) 0.8 lbs (0.38 kg) 1.3 lbs (0.60 kg) Part No.: Filter mat: Medium grade Mounting depth: Enclosure cut-out: Weight: Mounting frame Hole centers for attaching with screws - hole O 1/8" (3 mm) X X = 4.3" (109 mm) OTHER TECHNICAL DATA: Axial fan: Ball bearing, aluminum frame, plastic impeller UL94V-O Operational life min. 50,000 hrs at 77F (RH 65%) Ambient temperature -22F to 158F 2 lead wires 4" long with pressure clamps, type AWG 14 max. DC Axial fan in 12 V, 24 V, 48 V available on request Filter fan & exhaust Plastic, UL94V-O filter housing: Color light grey, temperature resistant -31F to 158F. Mounting frame: With double sided industrial adhesive band for affixing to the outside of enclosure. Certain operating circumstances may make the additional use of screws necessary. X = 5.4" (137 mm) Filter material: X = 7.4" (188 mm) Synthetic fiber with progressive construction, temperature resistant to 212F, self-extinguishing class F1. Moisture resistant to 100% RH. Can be cleaned by washing or vacuuming for reuse. Replacement filter mats available on request. The fan mounting on the EMI Version is plated and the mounting frame is fitted with Be Cu contact strips. Protection with standard filter mats G4: IP 54. Using fine filter mats F5 increases the protection to IP 55 but reduces the air volume. U.S. Patent No. 6,699,301 B1 Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. STEGO, Inc. * 2270 Northwest Parkway * Suite 170 * Marietta, GA 30067 * Tel: (770) 984-0858 * Fax: (770) 984-0615 Toll free: 1-888-783-4611 (US & Canada only) * www.stegousa.com FF018-11-05/US X