LCP Series * Miniature Low Cost Toroidal Inductors LCP Series surface mount toroidal inductors are designed for use in applications where energy storage is required for maintenance of a highly stable inductance when a rapid change in load current occurs. These inductors are excellent for filtering high frequency signals while supporting a substantial DC current as well as for AC ripple, switch mode power supplies and for use with DC-DC Converters. Features * Operating frequency to 1 MHz * High energy storage with minimum saturation * High stability from no load to full load * Designed as 1:1 Coupled Inductor (Series or Parallel) or as 1:1 Isolation Transformer * Manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility * Meets lead free reflow level J-STD-020C * Fully RoHS compliant Applications DC-DC Converters * Common Mode Filter * Computer Note Books Pulse Modulation Switching Regulators: Step-up, Step-down, Inverting or dual output * Filtering Battery Powered Equipment Parallel Connected Series Connected (ADC) L0 (H) 15% N o L o ad LCP1-3.00-2.2 LCP1-2.10-4.7 LCP1-1.40-10 LCP1-1.10-15 LCP1-0.92-22 LCP1-0.76-33 LCP1-0.64-47 LCP1-0.54-68 LCP1-0.44-100 LCP1-0.36-150 LCP1-0.30-220 LCP2-4.40-2.2 LCP2-3.10-4.7 LCP2-2.08-10 LCP2-1.68-15 LCP2-1.40-22 LCP2-1.32-33 LCP2-1.08-47 LCP2-0.80-68 LCP2-0.66-100 LCP2-0.54-150 3.00 2.10 1.40 1.10 0.92 0.76 0.64 0.54 0.44 0.36 0.30 4.40 3.10 2.08 1.68 1.40 1.32 1.08 0.80 0.66 0.54 2.2 4.7 10 15 22 33 47 68 100 150 220 2.2 4.7 10 15 22 33 47 68 100 150 9 16 37 58 86 133 205 307 376 719 866 7 13 28 52 70 83 139 241 295 521 1.50 1.05 0.70 0.55 0.46 0.38 0.32 0.27 0.22 0.18 0.15 2.20 1.55 1.04 0.84 0.70 0.66 0.54 0.40 0.33 0.27 LCP2-0.44-220 LCP2-0.36-330 LC P 3-6.64-2.2 LC P 3-4.46-4.7 LC P 3-3.00-10 LC P 3-2.42-15 LC P 3-2.00-22 LC P 3-1.62-33 LC P 3-1.34-47 LC P 3-1.12-68 LC P 3-0.94-100 LC P 3-0.76-150 LC P 3-0.62-220 LC P 3-0.50-330 LC P 3-0.42-470 LC P 3-0.36-680 0.44 0.36 6.64 4.46 3.00 2.42 2.00 1.62 1.34 1.12 0.94 0.76 0.62 0.50 0.42 0.36 220 330 2.2 4.7 10 15 22 33 47 68 100 150 220 330 470 680 784 960 5 12 26 37 55 84 127 188 250 346 478 671 1003 1500 0.22 0.18 3.32 2.23 1.5 1.21 1.00 0.81 0.67 0.56 0.47 0.38 0.31 0.25 0.21 0.18 Part Number Full Load Current Electrical Specifications @ 25C Test voltage between windings: 500 Vrms Operating temperature range: -40C to +125C Climatic Category: IEC68-1 40/125/56 Test frequency: Inductance measured @ 10kHz/10mV DCR mOhm mOhm Energy Storage (J) * 8.8 18.8 40 60 88 132 188 272 400 600 880 8.8 18.8 40 60 88 132 188 272 400 600 36 64 148 232 344 532 820 1228 1504 2876 3464 28 52 112 208 280 332 556 964 1180 2084 7.0 7.2 7.2 7.0 7.1 7.2 7.1 7.2 7.2 7.2 7.3 16.4 16.0 16.4 16.0 16.2 16.0 21.2 20.2 15.8 16.1 880 1320 8.8 18.8 40 60 88 132 188 272 400 600 880 1320 1880 2720 3136 3840 20 48 104 148 220 336 508 752 1000 1384 1912 2684 4012 6000 15.8 15.8C 31.7 32.2 32.8 31.8 32.7 32.1 32.3 32.4 32.2 31.8 31.2 30.4 30.5 32.3 Full Load Current (ADC) L0 (H) 15% N o L o ad THE TALEMA GROUP * DCR Dimensions Inches(Millimeters) A B C D H 0.276 (7.0) 0.276 (7.0) 0.236 (6.0) 0.059 (1.5) 0.201 (5.1) 0.354 (9.0) 0.354 (9.0) 0.299 (7.6) 0.067 (1.7) 0.248 (6.3) 0.433 0.433 0.370 0079 0.268 (11.0) (11.0) (9.4) (2.0) (6.8) World Wide Toroidal Specialists LCP Series * Miniature High Current Toroidal Inductors LO (H ) 15% N o L o ad DCR Energy Storage mOhm (J) * 3.70 2.40 1.68 1.40 1.15 0.93 0.78 0.66 0.54 0.44 0.36 0.30 0.25 0.20 0.17 3.20 8.8 18.8 40 60 88 132 188 272 400 600 880 1320 1880 2720 4000 18.8 20 36 84 140 200 304 448 668 1000 1228 1880 2628 3600 5420 8168 28 42.5 43.2 43.2 43.2 43.6 43.9 43.1 43.4 42.9 42.8 42.0 44.0 43.6 40.2 42.5 73.9 16 2.25 40 64 71.6 28 38 52 72 86 128 218 298 451 604 934 1629 2483 3773 1.75 1.50 1.22 1.02 0.85 0.70 0.58 0.47 0.39 0.32 0.27 0.22 0.18 0.15 60 88 1.32 188 272 400 600 880 1320 1880 2720 4000 6000 8800 112 152 2.08 288 344 512 872 1192 1804 2416 3736 6516 9932 15092 71.6 71.6 72.6 72.1 71.3 71.6 73.4 71.5 73.8 70.9 73.2 71.4 71.6 72.9 LO (H ) mOhm C urrent (ADC) 5 9 21 35 50 76 112 167 250 307 470 657 900 1355 2042 7 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 15% N o L o ad L C P 4-7 .40 -2 .2 L C P 4-4.8 0 -4.7 L C P 4-3 .3 6 -10 L C P 4-2 .8 0 -15 L C P 4-2 .3 0 -2 2 L C P 4-1.8 6 -3 3 L C P 4-1.5 6 -47 L C P 4-1.3 2 -6 8 L C P 4-1.0 6 -10 0 L C P 4-0 .8 8 -15 0 L C P 4-0 .7 2 -2 2 0 L C P 4-6 0 -3 3 0 L C P 4-0 .5 0 -47 0 L C P 4-0 .40 -6 8 0 L C P 4-0 .3 4-10 0 0 L C P 5 -6 .40 -4.7 7.40 4.80 3.36 2.80 2.30 1.86 1.56 1.32 1.08 0.88 0.72 0.60 0.50 0.40 0.34 6.40 2.2 4.7 10 15 22 33 47 68 100 150 220 330 470 680 1000 4.7 L C P 5 -4.5 0 -10 4.50 L C P 5 -3 .5 0 -15 L C P 5 -3 .0 0 -2 2 L C P 5 -2 .44-3 3 L C P 5 -2 .0 4-47 L C P 5 -1.7 0 -6 8 L C P 5 -1.40 -10 0 L C P 5 -1.16 -15 0 L C P 5 -0 .9 4-2 2 0 L C P 5 -0 .7 8 -3 3 0 L C P 5 -0 .6 4-47 0 L C P 5 -0 .5 4-6 8 0 L C P 5 -0 .44-10 0 0 L C P 5 -0 .3 6 -15 0 0 L C P 5 -0 .3 0 -2 2 0 0 3.50 3.00 2.44 2.04 1.70 1.40 1.16 0.94 0.78 0.64 0.54 0.44 0.36 0.30 Part N umber Series C onnected Full Load DCR D imensions Inches(Millimeters) A B 2 Top View Bottom View D 4 Talema In LCP4-4.80-4.7 Date Code 0.472 0.402 0.082 0.276 (12.0) (10.2) (2.2) (7.0) 0.472 (12.0) 0.472 (12.0) 0.402 (10.2) 0.082 (2.2) 0.358 (9.1) 2 2 4 1 4 3 2 3 Series Parallel 100% D 100 A 80% 80 60% 60 A 3 % of Initial Inductance Curve A A H 0.472 Transformer Pad Layout Pin 1 1 3 D (12.0) Talema's engineering staff can assist in the design of other inductance values and sizes. Notes: Schematic 1. L(H): Inductance is tested at 10mV and 10 kHz. 1 1 4 2. The Joule rating (1/2LI) is the ability of the inductor to store energy. Dimensions C 40% C B B Front View Side View 40 B 20% 20 0% H C Dimensions: Inches (Millimeters) Tolerance: 0.010 (0.25) unless specified otherwise Surface Coplanarity will be <0.006(0.15) 0 0 25% 50% 75% 100% 125% 150% 175% 200% % OF RATED ADC CURRENT Type LCP-1 LCP-2 LCP-3 LCP-4 & 5 Pad Dimensions A B 8.0 7.0 10.0 9.0 12.0 11.0 13.0 12.0 C 2.5 3.0 3.0 3.5 Temperature Rise in C from Ambient with ADC Current Curve B Parallel C onnected Full Load C urrent (ADC) D 2.5 3.0 3.0 3.5 Germany: Int.+4989-841 00-0 * Ireland: Int.+35 374 - 954 8666 * Czech Rep: Int.+420 377 - 338 351 * India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com (02-07) LCP Series