RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
Modular Bayonet Lock Connector
CIRP SERIES
(MIL-C-5015 STYLE)
CIRP
MODULAR BAYONET LOCK CONNECTOR
The CIR (Connector for Industrial Range) series is derived from the American Mil-C-5015 &
VG95234 specifications and is approved to the French rail specification NF F 61 030.
The connectors are intermateable and interchangeable with corresponding types, but
feature a low fire hazard thermoplastic insulator which is removeable for repositioning at
an alternative orientation.
Contacts are retained in the insulator by means of a unique beryllium copper spring clip.
Connector sealing features a stepped wire seal grommet which removes the need to
populate unused cavities with filler plugs.
Crimp tooling is industry standard and contacts are inserted and removed using simple
hand tools.
Benefits include:
• CIRP connectors qualified to NF F 61 030 norm.
• Approved for use on railway equipment by SNCF, RATP, Alstom Transport, Bombardier and LUL.
• Compatible with existing MS 5015 reverse bayonnet types.
• Low fire hazard/low halogen insulator material tested to French NF F 16-101 norm and BS 6853.
• Cadmium free surface plating. Black Zinc Cobalt – Not RoHS Compliant; Silver Zinc Cobalt – RoHS Compliant.
• Removable insulator.
• Positive location of insulator shell.
• Pin insulators feature with or without bonded resilient rubber face seal.
• Rear individual wire seal grommet with webbed holes.
• Mated connector assemblies sealed to IP67.
• Part populated insulators achieve sealing without the fitting of grommet fillers.
• Contacts retained by high performance metal spring clip.
• Comprehensive range of screened/unscreened, sealed/unsealed backshells & accessories.
• 3D Models available to download from our website.
Tested to and meets the specifications of the Fire Barrier Testing: EN1363. BS476
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
Technical Information ...................................................................................................................................................................... 3-4
Part Number Explanation ...................................................................................................................................................................5
Basic Assembly .......................................................................................................................................................................................6
Shell Assemblies .....................................................................................................................................................................................7
Insulators ...................................................................................................................................................................................................8
Individual Wire Seal Grommet ..........................................................................................................................................................9
Crimp Contacts ................................................................................................................................................................................ 10-11
Insert Arrangements ........................................................................................................................................................................... 12
Insert Arrangement Selector ........................................................................................................................................................... 13
Insulator Orientations ......................................................................................................................................................................... 14
Additional Alignment/Polarising Device .................................................................................................................................... 15
Rear Panel Mounted Receptacal ....................................................................................................................................................16
Front Panel Mounted Receptacal .................................................................................................................................................. 17
Plug Connector (style ‘T’ less accessories) ................................................................................................................................18
Single Hole Mounting ......................................................................................................................................................................... 19
Plug Connector with Protective Rubber Ring (style ‘T’ less accessories) ....................................................................20
Locking Backnut for Grommet Sealing only – LBN ................................................................................................................ 21
Straight Conduit Heatshrink Screen Adaptor – SCHSA (locking) ................................................................................... 22
90˚ Elbow Conduit Heatshrink Screen Adaptor – ECHSA (locking) .............................................................................. 23
Shell Heatshrink Extender – SHE (PG/METRIC inner thread – imperial outer thread) (locking) ......................... 24
Step-Up Adapters – SUA (PG/METRIC inner thread – Imperial outer thread) (locking) ........................................ 25
Step-Down Adapters – SDA (PG/METRIC inner thread – Imperial outer thread) ..................................................... 26
Cable Gland Adapters (fitting on SCHSA & ECHSA accessory with PG/METRIC thread) ..................................... 27
Shell Extender with Screening – SPTAS (non locking) ........................................................................................................ 28
Adapters – CRA (2 piece adaptor to terminate cable screen braid to connector with conduit outer) ............ 29
Waterproof Clamp for Jacketed Cable – CIRMSP3057C ..................................................................................................... 30
Cable Clamp – CIRMSP3057A ........................................................................................................................................................ 31
Telescopic Bushing – SBMSH554 (use with CIRMSP3057A clamp) ................................................................................ 32
Panel Gasket, Non-Conductive/Conductive Front & Rear Mounted Connectors – RPG/S & FPG/S .................. 33
Connector Fixing Nut Plates ..........................................................................................................................................................34
Receptacle Mounting Detail ........................................................................................................................................................... 35
Metal Protective Caps ....................................................................................................................................................................... 36
RFI Braid Sock, Bandit Strap & Knitmesh Braid ...................................................................................................................... 37
Tooling for crimp contacts .............................................................................................................................................................. 38
Notes .......................................................................................................................................................................................................39
Notes .......................................................................................................................................................................................................40
Notes ........................................................................................................................................................................................................41
CONTENTS
Please note all images are for reference only.
PAGE 5
TECHNICAL INFORMATION
Shell: Aluminium Alloy
Insulator: Low fire hazard thermoplastic qualified to NFF 16101 and to meet BS 6853
Grommet & bushing: Low fire hazard rubber tested to NFF 16101 norm and to meet BS 6853
Contacts: Copper alloy
Contact retaining clip: Beryllium copper
Accessory hardware: Aluminium alloy
Operating temperature range: -55˚C to +125˚C
Shock severity: 75g
Vibration: 5-500Hz long endurance. 30 hours at 10g
Acceleration: 50g
Coupling: 3 pin reverse bayonet. 120˚coupling nut rotation
Number of contacts: 7 to 60
Contact termination: Crimp & PCB
Minimum retention force of
the contact in the insulator:
Beryllium copper spring clip
70N for contacts #16 (1.6 mm)
90N for contacts #12 (2.4 mm)
110N for contacts #8 (3.6 mm)
Sealing: IP67 rated when connectors are mated and used with appropriate sealed backshell
Matings: 2000 minimun mating and unmating
Max Coupling Torque: 8NM
Aluminium parts: Black chromate over zinc cobalt and silver passivate RoHS compliant
Contacts: Gold over silver (#16 gold only)
Materials
Environmental Ratings
Mechanical Features
CIRP03 receptacle connectors feature stainless steel pins at critical wear points of the cam tracks. This feature is
incorporated to protect against excessive wear inflicted by continuous mating/de-mating and heavy vibration.
Standard Plating Finishes
* Consult TE for alternative finishes
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
TECHNICAL INFORMATION
Contact Size
AWG
*Maximum Current
@ 20˚C
* Rated Current
@ 85˚C
** De-rated Current
@ 85˚C
16 22A 13A 10A
12 41A 23A 20A
873A 46A 42A
* Single contact in isolation
** Grouped contacts
Service Rating Sea Level
A D
Working voltage DC or AC Peak 700 V 1,250 V
Voltage Proof AC RMS 2,000 V 2,800 V
Minimum Flashover AC RMS 2,800 V 3,600 V
Contact Arrangement Service Rating
Contact Current De-rating
0
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100 110 120
Temperature ºC
Size 16
Size 12
Size 8
Operating Current - Amp
PAGE 7
CIRP 03 LBN 22 14 GPS P FS **** ** *
Series
Prefix
Accessory
Type
Contact
Arrangement
Contact Type
P=Pin S=Socket
Modification
Code
Insulator
Orientation
Shell
Style
Shell
Size
Grommet
Type
Face
Seal
Contact
Supply
Series Prefix: CIRP
Shell Style: 00 4 Hole Square flange receptacle, front panel mounted.
03 4 Hole Square flange receptacle, rear panel mounted.
SE06 Plug with RFI grounding
09 Single hole mounted receptacle
PSE06T Plug with RFI grounding and rubber covered coupling nut
Accessory Type: ANo rear threads and no accommodation for accessories
Shell styles 00 & 03
T Rear threads for accessory accommodation
LBN Locking Back Nut
SCHSA Straight Conduit Heatshrink Adaptor
ECHSA 90°Conduit Heatshrink Adaptor
SHE#
Shell Extender
M – Metric thread
P – PG thread
SUA#
Step up adapter
M – Metric thread
P – PG thread
SDA#
Step down adapter
M – Metric thread
P – PG thread
Shell Size: 18 – 40
Contact Arrangement: See page 12
Grommet Type: As there is a choice of Wire Seal Grommet to suit varying cable diameters, this component
may be omitted from the part number and ordered as a separate item if required.
Contact Type: P = Pin
S = Socket
Face Seal: Pin insulator only. When face seal is required, add ‘FS’ to part number.
Modification Code: Issued for connector with non-standard feature. Consult TE for detail.
Contact Supply:
Leave blank for connectors supplied with silver contacts
Add ‘P3’ for gold contacts.
Add ‘V0’ for connectors supplied without contacts.
Insulator Orientation: Leave blank for connectors supplied in sub-assembly form. Add applicable orientation letter
(see page 14) if connectors are to be supplied factory assembled.
PART NUMBER EXPLANATION
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
BASIC ASSEMBLY
Rear Panel Mounted Connector
Basic Assembly
Fixed Shell Assembly
Pin Face Seal
Free Shell Assembly
Removable Plastic Insulator
Removable Plastic Insulator
Insulator Retaining Ring
Insulator Retaining Ring
Accessory
(LBN shown)
Individual Wire Seal Grommet
Individual Wire Seal Grommet
Contact with Metal Retention Clip
Accessory
(SCHSA shown)
Crimp Contact with Metal Retention Clip
Plug Connector
Basic Assembly
PAGE 9
SHELL ASSEMBLIES
Front or Rear Mounting Fixed Receptacle
Free Plug Assembly with EMI/RFI Grounding
Shell Size Part Number
18 CIRPSE18FS
20 CIRPSE20FS
22 CIRPSE22FS
24 CIRPSE24FS
28 CIRPSE28FS
32 CIRPSE32FS
36 CIRPSE36FS
40 CIRPSE40FS
Shell Size Part Number
Rear Mount
Part Number
Front Mount
18 CIRP18XR CIRP18XF
20 CIRP20XR CIRP20XF
22 CIRP22XR CIRP22XF
24 CIRP24XR CIRP24XF
28 CIRP28XR CIRP28XF
32 CIRP32XR CIRP32XF
36 CIRP36XR CIRP36XF
40 CIRP40XR CIRP40XF
Note: Both the fixed and free shell assembly is supplied with an insulator retaining circlip.
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
INSULATORS
Shell Size Contact Arrangement Part Number
18 18-19 CIRP18-19PFS
20 20-15 CIRP20-15PFS
22 22-14 CIRP22-14PFS
24 24-10 CIRP24-10PFS
28 28-21 CIRP28-21PFS
32 32-A13 CIRP32-A13PFS
36 36-A22 CIRP36-A22PFS
40 40-A35 CIRP40-A35PFS
40 40-A60 CIRP40-A60PFS
Shell Size Contact Arrangement Part Number
18 18-19 CIRP18-19S
20 20-15 CIRP20-15S
22 22-14 CIRP22-14S
24 24-10 CIRP24-10S
28 28-21 CIRP28-21S
32 32-A13 CIRP32-A13S
36 36-A22 CIRP36-A22S
40 40-A35 CIRP40-A35S
40 40-A60 CIRP40-A60S
Shell Size Part Number
18 CIRP18IC
20 CIRP20IC
22 CIRP22IC
24 CIRP24IC
28 CIRP28IC
32 CIRP32IC
36 CIRP36IC
40 CIRP40IC
Pin Insulator with Face Seal
Delete ‘FS’ if seal is not required
Socket Insulator
Insulator Retaining Ring
PAGE 11
INDIVIDUAL WIRE SEAL GROMMET
Individual Wire Seal Grommets – Size 16 Contacts
Individual Wire Seal Grommets – Size 12 Contacts
Individual Wire Seal Grommets – Size 8 Contacts
Grommet Type Contact
Arrangement
Wire Insulation Min
O/D mm
Wire Insulation Max
O/D mm
Part Number
Pin, Small Bore
18-19
0.8 2.30
CIRP18-19GPS
22-14 CIRP22-14GPS
28-21 CIRP28-21GPS
40-A60 CIRP40-A60GPS
Socket, Small Bore
18-19
0.8 2.30
CIRP18-19GSS
22-14 CIRP22-14GSS
28-21 CIRP28-21GSS
40-A60 CIRP40-A60GSS
Pin, Large Bore
18-19
1.5 3.30
CIRP18-19GPL
22-14 CIRP22-14GPL
29-21 CIRP28-21GPL
40-A60 CIRP40-A60GPL
Socket, Large Bore
18-19
1.5 3.30
CIRP18-19GSL
22-14 CIRP22-14GSL
28-21 CIRP28-21GSL
40-A60 CIRP40-A60GSL
Grommet Type Contact
Arrangement
Wire Insulation Min
O/D mm
Wire Insulation Max
O/D mm
Part Number
Pin, Small Bore
20-15
0.8 2.30
CIRP20-15GPS
32-A13 CIRP32-A13GPS
36-A22 CIRP36-A22GPS
40-A35 CIRP40-A35GPS
Socket, Small Bore
20-15
0.8 2.30
CIRP20-15GSS
32-A13 CIRP32-A13GSS
36-A22 CIRP36-A22GSS
40-A35 CIRP40-A35GSS
Pin, Large Bore
20-15
2.35 5.20
CIRP20-15GPL
32-A13 CIRP32-A13GPL
36-A22 CIRP36-A22GPL
40-A35 CIRP40-A35GPL
Socket, Large Bore
20-15
2.35 5.20
CIRP20-15GSL
32-A13 CIRP32-A13GSL
36-A22 CIRP36-A22GSL
40-A35 CIRP40-A35GSL
Grommet Type Contact
Arrangement
Wire Insulation Min
O/D mm
Wire Insulation Max
O/D mm
Part Number
Pin, Small Bore
24-10
1.86 4.90 CIRP24-10GPS
Socket, Small Bore CIRP24-10GSS
Pin, Large Bore 3.00 7.20 CIRP24-10GPL
Socket, Large Bore CIRP24-10GSL
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
CRIMP CONTACTS
Pin
Contact Size
AWG
Part Number A B C Conductor CSA
mm2
L
CIRP**/**KPKP3
16/22 16/22
3.20
0.90 2.30 0.25/0.34
31.75
16/20 16/20 1.10 2.65 0.50/0.60
16/18 16/18 1.25 2.30 0.75/0.93
16 16 1.75 2.75 0.93/1.50
16/14 16/14 1.80 2.90 1.68
CIRP**/**KPK
12/20 12/20
4.80
1.10 2.65 0.50/0.60
37.50
12/18 12/18 1.25 2.30 0.75/0.93
12/16 12/16 1.75 2.75 0.93/1.50
12/14 12/14 1.80 2.90 1.68
12 12 2.50 3.80 2.50/3.00
12/10 12/10 3.00 4.00 5.53
12/(40) 12/40 2.70 4.00 4.00
CIRBP**/**KPKP80
8/16 8/16
7.80
1.75 2.75 0.93/1.50
40.70
8/(40) 8/40 2.90 5.20 4.00
8/12 8/12 2.50 3.80 2.50
8 8 4.55 6.80 9.00
(100) 100 4.40 7.0 0 10.00
(100/60) 100/60 3.40 5.50 6.00
( ) = metric
Note: Size 16 contacts – gold plating only. Size 12, 8 & 100, silver or gold plating. For gold, add ‘P3’ to part number.
L
ØB
ØC
ØA
PAGE 13
CRIMP CONTACTS
Socket
Contact Size
AWG
Part Number A B C Conductor CSA
mm2
L
CIRP**/**KLKP3
16/22 16/22
3.20
0.90 2.30 0.25/0.34
36.50
16/20 16/20 1.10 2.65 0.50/0.60
16/18 16/18 1.25 2.30 0.75/0.93
16 16 1.75 2.75 0.93/1.50
16/14 16/14 1.80 2.90 1.68
CIRP**/**KLK
12/20 12/20
4.80
1.10 2.65 0.50/0.60
37.50
12/18 12/18 1.25 2.30 0.75/0.93
12/16 12/16 1.75 2.75 0.93/1.50
12/14 12/14 1.80 2.90 1.68
12 12 2.50 3.80 2.50/3.00
12/10 12/10 3.00 4.00 5.53
12/(40) 12/40 2.70 4.00 4.00
CIRBP**/**KSKP80
8/16 8/16
7.80
1.75 2.75 0.93/1.50
40.70
8/(40) 8/40 2.90 5.20 4.00
8/12 8/12 2.50 3.80 2.50
8 8 4.55 6.80 9.00
(100) 100 4.40 7.0 0 10.00
(100/60) 100/60 3.40 5.50 6.00
( ) = metric
Note: Size 16 contacts – gold plating only. Size 12, 8 & 100, silver or gold plating. For gold, add ‘P3’ to part number.
L
ØB
ØC
ØA
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
INSERT ARRANGEMENTS
Note: Views from front face of pin insert
7 Contacts
10 Contacts
35 Contacts 37 Contacts 60 Contacts
40-A60
Service A
60 Contacts,
Size #16 (15)
28-21
Service A
37 Contacts,
Size #16 (15)
40-A35
Service D
35 Contacts,
Size #12 (25)
18-19
Service A
10 Contacts,
Size #16 (15)
32-A13
Service D
13 Contacts,
Size #12 (25)
22-14
Service A
19 Contacts,
Size #16 (15)
36-A22
Service D
22 Contacts,
Size #12 (25)
24-10
Service A
7 Contacts,
Size #8 (100)
20-15
Service A
7 Contacts,
Size #12 (25)
13 Contacts 19 Contacts 22 Contacts
Size 16
Size 12 Contact
Size 8 Contact
PAGE 15
INSERT ARRANGEMENT SELECTOR
Notes:
Shell
Size
Contact
Arrangement
No. of
Contacts
Contact Size AWG
& Current Rating (Derated)
Amps at 85˚C Shell
Orientation
Service
Rating
16 12 8
18 19 10 10x10A - - NXY
A
20 15 7 - 7x20A - NWZ
22 14 19 19x10A - - NWXYZ
24 10 7 - - 7x42A NWZ
28 21 37 37x10A - -
NWXYZ
32 A13 13 - 13x20A -
D36 A22 22 - 22x20A -
40 A35 35 - 35x20A -
40 A60 60 60x10A - - A
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
INSULATOR ORIENTATIONS
Position of Orientation Identifier on Insulator Moulding
View of Mating Face of Pin Inserts
Contact
Arrangement
Angular Displacement of Inserts
N YELLOW W BLUE X GREEN Y PURPLE Z WHITE
18-19
0
- 120 240 -
20-15
80
- -
280
22-14 110 250
24-10 - -
28-21 110 250
32-A13 65 130 230 295
36-A22 80 110 250 280
40-A35 70 130 230 290
40-A60 80 110 250 280
A
B
C
Z
A
B
C
Y
A
B
C
X
A
B
C
W
A
B
C
N
Position of orientation
identifier on insulator moulding
PAGE 17
ADDITIONAL ALIGNMENT / POLARISING DEVICE
Contact
Arrangement
Insulator
Orientation
Alignment / Polarising
Pin Position
18-19
ALL
Any one hole
20-15 Any one hole apart from G
22-14 Holes K & R
24-10 Any one hole apart from G
28-21 Holes E & e
32-A13 Hole 10
36-A22 Holes 14 & 17
40-A35 Holes 1 & 24
40-A60 N Holes 3 & 51
W, X, Y & Z Holes 26 & 59
How to Order:
CIRP ** FAP
** Contact
Note: Consult TE for all other positions.
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
REAR PANEL MOUNTED RECEPTACLE
CIRP03T
Note: Maximum panel thickness when using cap head screws.
When using countersunk screws, maximum panel thickness = 7.5mm.
See page 35 for panel mounting details
C
C
4 Through Holes
ø D1
Om
P
Max Panel
Thickness
BE
H
Thread
Fø
Gø
Shell
Size
ØF
Thread
Class 2A
B
Max
C
Max
Ød1
+0,2-0
Threaded
Holes
(MOD CODE M6)
E
Max
ØG H P
see
note
Om Min
Overlap
Mated
18 1" x 20
UNEF
23.45
35.30
3.20 M3
4.20
18.30
46.25 3.30
15.85
20 1 1/8" x 18
UNEF 38.30 20.50
22 1 1/4" x 18
UNEF 41.30 24.60
15.75
24 1 3/8" x 18
UNEF 44.80
3.70
M4 27.00
28 1 5/8" x 18
UNEF
24.45
51.10
M5
32.50
32 1 7
/8" x 16
UN 57.30
4.30
35.80
36 2 1/16" x 16
UNS 63.80 42.50
40 2 5/16" x 16
UN 70.20 48.50
PAGE 19
FRONT PANEL MOUNTED RECEPTACLE
CIRP00T
Note: Maximum panel thickness when using cap head screws.
When using countersunk screws, maximum panel thickness = 7.5mm.
See page 35 for panel mounting details
Om
P
Max Panel
Thickness
BE
H
Thread
Fø
Gø
C
C
4 Through Holes
ø D1
Shell
Size
ØF
Thread
Class 2A
B
Max
C
Max
Ød1
+0,2-0
Threaded
Holes
(MOD CODE M6)
E
Max
ØG H P
see
note
Om Min
Overlap
Mated
18 1" x 20
UNEF
23.60
35.30
3.20 M3
4.20
18.30
46.25 3.30
15.85
20 1 1/8" x 18
UNEF 38.30 20.50
22 1 1/4" x 18
UNEF 41.30 24.60
15.75
24 1 3/8" x 18
UNEF 44.80
3.70
M4 27.00
28 1 5/8" x 18
UNEF
25.20
51.10
M5
32.50
32 1 7
/8" x 16
UN 57.30
4.30
35.80
36 2 1/16" x 16
UNS 63.80 42.50
40 2 5/16" x 16
UN 70.20 48.50
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
øC
øF
Thread
øG
Øm
H
E
PLUG CONNECTOR (STYLE ‘T’ LESS ACCESSORIES)
CIRPSE06T****
Shell
Size
C
Max
E
Max
ØF Thread
Class 2A
ØG H Om Min
Overlap
Mated
18 37.30
24.00
1" x 20 UNEF 18.30
46.25
15.8520 40.70 1 1/8" x 18 UNEF 20.50
22 44.20 1 1/4" x 18 UNEF 24.60
24 47.70 1 3/8" x 18 UNEF 27.00
15.75
28 54.50 1 5/8" x 18 UNEF 32.50
32 61.40
27.00
1 7
/8" x 16 UN 35.80
36 68.00 2 1/16" x 16 UNS 42.50
40 74.00 2 5/16" x 16 UN 48.50
Note: All plug connectors are EMI/RFI versions.
PAGE 21
SINGLE HOLE MOUNTING
CIRP09T
Shell
Size
A
Max B C D
Max EØF Thread
Class 2A ØG
POm Min
Overlap
Mated
Min Max
18
49.55 33.70 4.80
47.85 39.70 1" x 20 UNEF 16.80
2.40
9.00 15.85
20 51.05 44.00 1 1/8" x 18
UNEF 18.00
22 54.45 46.00 1 1/4" x 18
UNEF 20.20
9.10
15.75
24 57.45 50.80 1 3/8" x 18
UNEF 20.20
28
52.15 35.20 5.60
63.75 55.00 1 5/8" x 18
UNEF 22.50
8.50
32 70.05 62.00 1 7
/8" x 18
UNEF 24.70
36 76.45 71.00 2 1/16" x 18
UNS 26.90
8.30
40 83.75 75.00 2 5/16" x 18
UN 29.60
P - Panel Thickness
D
D
E
G
G
F
Thread
Om
B
C
A
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
PLUG CONNECTOR WITH PROTECTIVE RUBBER
RING (STYLE ‘T’ LESS ACCESSORIES)
Shell
Size
B
Max
C
Max
E
Max
ØF Thread
Class 2A
H
Max
Om Min
Overlap
Mated
18 49.00 43.50
27.1 0
1" x 20
UNEF
46.82
17.85
20 51.50 46.00 1 1/8" x 18
UNEF
22 56.00 50.50 1 1/4" x 18
UNEF
24 60.00 54.00 1 3/8" x 18
UNEF
17.75
28 67.00 61.00 1 5/8" x 18
UNEF
32 76.00 67.60 1 7
/8" x 16
UN
36 82.30 74.30 2 1/16" x 16
UNS
40 88.00 80.00 2 5/16" x 16
UN
Note: All plug connectors are EMI/RFI versions.
CIRPPSE06T****
E
H
ØF Thread
ØB
ØC
Om
PAGE 23
LOCKING BACKNUT FOR GROMMET
SEALING ONLY – LBN
Shell
Size
ØF Thread
Class 2A
G
Max
N
Max
ØS1
Max
ØS2
Max
ØT
Max
Oa Min
Overlap
Accessory
18 1" x 20 UNEF
8.70
25.65
25.50 16.70 31.00
7.0 0
20 1 1/8" x 18
UNEF
30.20 19.80
35.00
22 1 1/4" x 18
UNEF 38.00
24 1 3/8" x 18
UNEF
24.65
36.60
25.40 41.00
28 1 5/8" x 18
UNEF 27.00 48.00
32 1 7
/8" x 16
UN 44.50 32.50 54.00
36 2 1/16" x 16
UNS 50.90 35.70 61.00
40 2 5/16" x 16
UN 57.20 45.00 67.0 0
How to Order:
CIRBP ** LBN
** Shell Size
ØT
Øa
N
G
ØS1
ØS2
ØF Thread
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
STRAIGHT CONDUIT HEATSHRINK SCREEN
ADAPTER – SCHSA (LOCKING)
Shell
Size
ØF Thread
Class 2B
ØF1 Thread
Class 2A
G
Max
N
Max
ØS
Min
ØT
Max
Oa Min
Overlap
Accessory
18 1" x 20
UNEF
1" x 20
UNEF
12.40
36.06 16.70 31.00
7.0 0
20 1 1/8" x 18
UNEF 1 3/16" x 18
UNEF
38.60
19.80 35.00
22 1 1/4" x 18
UNEF 21.34 38.00
24 1 3/8" x 18
UNEF 1 7
/16" x 18
UNEF
25.40 41.00
28 1 5/8" x 18
UNEF 38.56 30.13 48.00
32 1 7
/8" x 16
UN
1 3/4" x 18
UNS
12.10
38.26 36.73 54.00
36 2 1/16" x 16
UNS 2" x 18 UNS 39.26 41.00 61.00
40 2 5/16" x 16
UN
2 1/4" x 16
UN 38.30 48.10 67.00
How to Order:
CIRBP ** SCHSA
** Shell Size
ØT
ØF Thread
Øa
N
G
ØF1
ØS
PAGE 25
90° ELBOW CONDUIT HEATSHRINK SCREEN
ADAPTER – ECHSA (LOCKING)
How to Order:
CIRBP ** ECHSA
** Shell Size
Shell
Size
ØF Thread
Class 2B
Ø1 Original Thread
Class 2B
B
Max
C
Max
ØT
Max
Oa Min
Overlap
Accessory
18 1" x 20
UNEF
1" x 20
UNEF 31.10
35.00
31.00
7.0 0
20 1 1/8" x 18
UNEF
1 3/16" x 18 UNEF
33.00 35.00
22 1 1/4" x 18
UNEF 33.10 38.00
24 1 3/8" x 18
UNEF
1 7
/16" x 18 UNEF
37.90
40.00
41.00
28 1 5/8" x 18
UNEF 37.10 48.00
32 1 7
/8" x 16
UN 1 3/4" x 18 UNS 43.10 45.00 54.00
36 2 1/16" x 16
UNS
2" x 18
UNS 45.90 50.00 61.00
40 2 5/16" x 16
UN
2 1/4" x 16
UN 49.00 54.60 67.00
Note: ECHSA can be locked in multiple angles / positions.
Oa
B
Ø1
ØT
ØF Thread
C
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
SHELL HEATSHRINK EXTENDER – SHE (PG / METRIC
INNER THREAD – IMPERIAL OUTER THREAD) (LOCKING)
Shell
Size
F Thread
Class 2B
E Thread
Class 2A
G Thread
PG/METRIC
ØA
Max BOverlap
Oa Min
18 1" x 20
UNEF
1" x 20
UNEF
PG 13.5
M20x1.5 31.00
58.8
7.0 0
20 1 1/8" x 18
UNEF 1 3/16" x 18
UNEF
PG 16
M25x1.5
35.00
22 1 1/4" x 18
UNEF 38.00
24 1 3/8" x 18
UNEF 1 7
/16" x 18
UNEF
PG 21
M32x1.5
41.00
28 1 5/8" x 18
UNEF 48.00
65.8
32 1 7
/8" x 16
UN
1 3/4" x 18
UNS PG 29
M40x1.5
54.00
36 2 1/16" x 16
UNS
2" x 18
UNS 61.00
40 2 5/16" x 16
UN
2 1/4" x 16
UN
PG 36
M50x1.5 67.00
How to Order:
CIRBP ** ** SHE #
** Shell Size & Planform
# M = Metric, P = PG
15.00
Oa
ØA
ØD
F Thread
G Thread
E Thread
B
PAGE 27
STEP-UP ADAPTERS – SUA (PG / METRIC INNER
THREAD – IMPERIAL OUTER THREAD) (LOCKING)
How to Order:
CIRBP ** ** SUA #
** Shell Size & Planform
# M = Metric, P = PG
Shell
Size
F Thread
Class 2B
E Thread
Class 2A
G Thread
PG/METRIC
ØA
Max BØD
Bore
Overlap
Oa Min
18 1" x 20
UNEF
1 3/16" x 18
UNEF
PG 16
M25x1.5 31.00
58.8
16.7
7.0
20 1 1/8" x 18
UNEF 1 7
/16" x 18
UNEF
PG 21
M32x1.5
35.00
19.8
22 1 1/4" x 18
UNEF 38.00
24 1 3/8" x 18
UNEF
1 3/4" x 18
UNS
PG 29
M40x1.5
41.00 25.4
28 1 5/8" x 18
UNEF 48.00
65.8
27.0
32 1 7
/8" x 16
UN 54.00 32.5
36 2 1/16" x 16
UNS
2" x 18
UNS
PG 36
M50x1.5 61.00 35.7
40 2 5/16" x 16
UN
2 1/4" x 16
UN
PG 42
M50x1.5 67.00 45.0
15.00
12.00
Oa
ØA
ØD
F Thread
G Thread
E Thread
B
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
STEP-DOWN ADAPTERS – SDA (PG / METRIC
INNER THREAD – IMPERIAL OUTER THREAD)
(LOCKING)
How to Order:
CIRBP** ** SDA#
** Shell Size & Planform
# M = Metric, P = PG
Shell
Size
F Thread
Class 2B
E Thread
Class 2A
G Thread
PG/METRIC
ØA
Max BOverlap
Oa Min
18 1" x 20
UNEF
7
/8" x 18
UNEF
PG 11
M18x1.5 31.00
58.8
20 1 1/8" x 18
UNEF 1" x 20
UNEF
PG 13.5
M20x1.5
35.00
22 1 1/4" x 18
UNEF 38.00
24 1 3/8" x 18
UNEF 1 3/16" x 18
UNEF
PG 16
M25x1.5
41.00
28 1 5/8" x 18
UNEF 48.00
65.8
32 1 7
/8" x 16
UN
1 7
/16" x 18
UNEF
PG 21
M32x1.5 54.00
36 2 1/16" x 16
UNS
1 3/4" x 18
UNEF PG 29
M40x1.5
61.00
40 2 5/16" x 16
UN
1" x 18
UNS 67.00
15.00
12.00
Oa
ØA
ØD
F Thread
G Thread
E Thread
B
PAGE 29
CABLE GLAND ADAPTERS (FI TTING ON SCHSA &
ECHSA ACCESSORY WITH PG / METRIC THREAD)
Shell
Size
Part
Number ØA BThread
C
18 CIRB-18-#GA-#M32 34.00 40.00 1" x 20 UNEF
20-22 CIRB-20-#GA-#M32 37.0 0 35.00
1 3/16" x 18 UNEF
20-22 CIRB-20-#GA-#M32
43.00 40.0024-28 CIRB-24-#GA-#M32
1 7
/16" x 18 UNEF24-28 CIRB-24-#GA-#M32
24-28 CIRB-24-#GA-#M32
54.00
46.00
32 CIRB-32-#GA-#M32 38.00 1 3/4" x 18 UNS
36 CIRB-36-#GA-#M32 57.20 50.00 2" x 18 UNS
40 CIRB-40-#GA-#M32 65.00 2 1/4" x 16 UN
Thread Table (D)
Imperial
(PGA) Thread Size Metric
(MGA) Thread Size
A PG7 A M12
B PG9 B M16
C PG11 C M20
D PG13.5 D M25
E PG16 E M32
F PG21 F M40
G PG29 G M50
H PG36 H M63
J PG42
K PG48
Part Number Key
CIRB ## #GA # M32
P/N Prefix
Accessory Size
Thread Designation
PGA – Imperial
MGA – Metric
Finish Code
Thread ‘D’
(see table)
P/N Example to fit shell size 20 with a
rear metric thread size M25
TEB 20 MGA DM32
ØA
B
‘O’ RING SEAL
THREAD D
THREAD C
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
SHELL EXTENDER WITH SCREENING – SPTAS
(NON LOCKING)
How to Order:
CIRBP** ** SPTAS #
** Shell Size & Planform
# M = Metric, P = PG
Shell
Size ØA B
Max
ØC
Max
ØF Thread
Class 2B G Thread ØH Thread
Class 2A
18 29.50 68.00 11.30 1 x 20
UNEF M25x1.5-6H 1 3/16" x 18
UNEF
20* - - - - - -
22 36.50 68.00 21.00 1 3/16" x 18
UNEF M32x1.5-6H 1 7
/16" x 18
UNEF
24* - - - - - -
28 43.00 70.00 27.50 1 7
/16" x 18
UNEF M40x1.5-6H 1 3/4" x 18
UN
32* - - - - - -
36* - - - - - -
40 64.00 70.00 39.00 2 1/4" x 16
UN M50x1.5-6H 2 1/4" x 16
UN
Note: * Please consult TE for these sizes
Om Min.
12.00
O Ring Seal
F Thread Ø
G Thread Ø
ØC Max,
A
PAGE 31
ADAPTERS – CRA (2 PIECE ADAPTOR TO
TERMINATE CABLE SCREEN BRAID TO
CONNECTOR WITH CONDUIT OUTER)
Shell
Size
ØF Thread
Class 2B
ØF1 Thread
Class 2A
G
Max
N
Max
S
Min
T
Max
M
Max
16S 7 1/8" x 20
UNEF
1" x 20
UNEF 10.00 27.60 9.74 25.50 13.10
18 1" x 20
UNEF
1 3/16" x 18
UNEF
11.00
30.60
12.90 29.10 16.26
20
1 3/16" x 18
UNEF
1 7
/16" x 18
UNEF 18.23 35.45 21.51
22
24
1 7
/16" x 18
UNEF 1 3/4" x 18
UNS 25.93
43.60
29.2128
32 1 3/4" x 18
UNS
13.00
49.55
36 2" x 18
UNS
2" x 18
UNS 32.00 55.90 35.19
40 2 1/4" x 16
UN
2 1/4" x 16
UN 32.33 63.10 35.60
How to Order:
CIRB ** CRA M32
** Shell Size
Note: This accessory can only be used in conjunction
with style SCHSA or ECHSA adaptors.
ØT
A
A
ØF
THREAD
SECTION A-A
ØS
ØM
ØF1
THREAD
G
N
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
WATERPROOF CLAMP FOR
JACKETED CABLE – CIRMSP3057C
Shell
Size
Part Number
CIRMSP3057C**M32
ØA Thread
Class 2A
ØC D
Max
E
Max
Min Max
16 / 16S 16 / 16S 7 1/8" x 20
UNEF 7.92 13.48 34.93 30.18
18 18 1" x 20
UNEF 9.53 15.87
36.50
33.32
20 20
1 3/16" x 18
UNEF 12.70 19.00 39.21
22 22
24 24
1 7
/16" x 18
UNEF 15.09 23.80 39.67 44.45
28 28
32 32 1 3/4" x 18
UNS 23.83 31.75 46.02 57.15
36 36 2" x 18
UNS 24.61 35.00
52.37
60.33
40 40 2 1/4" x 16
UN 30.18 41.25 66.68
E
A
A
THREAD ‘A’
D
ØC
SECTION A-A
PAGE 33
CABLE CLAMP – CIRMSP3057A
Shell
Size
Part Number
CIRMSP3057A**M32
ØA Thread
Class 2A
B
Max
C
Max
D
Max
16 / 16S 16 / 16S 7 1/8" x 20
UNEF 28.58 14.30
24.61
18 18 1" x 20
UNEF 30.96 15.88
20 20
1 3/16" x 18
UNEF 35.71 19.05
22 22
24 24
1 7
/16" x 18
UNEF 42.85 23.83 26.97
28 28
32 32 1 3/4" x 18
UNS 52.37 31.75 28.58
36 36 2" x 18
UNS 57.15 34.93 30.15
40 40 2 1/4" x 16
UN 64.29 41.28 43.66
ØB
D
THREAD ‘A’
ØC
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
TELESCOPIC BUSHING – CIRSBMSH554
(USE WITH CIRMSP3057A CLAMP)
Shell
Size
Part Number
CIRSBMSH554** ØA B ØC ØD
16 / 16S 3 19.05 63.50 11.10 13.97
18 4 22.23 60.33 14.27 15.57
20 5 25.40
57.15 15.88 18.75
22 6 28.58
24 7 31.75
53.98 19.05 23.50
28 8 38.23
32 9 44.45 50.80 23.80 31.45
36 10 47.88 47.63 31.75 34.62
40 11 52.90 44.40 34.92 40.99
Note: Through bore reduction possible by telescoping bushings
A
A
C
A
D
B
SECTION A-A
PAGE 35
PANEL GASKET, NON-CONDUCTIVE /
CONDUCTIVE FRONT & REAR MOUNTED
CONNECTORS – RPG/S & FPG/S
Shell
Size
A
Min
ØB
Nominal
ØB1
Nominal
Ød
Min
T
Nominal
18 34.90 25.40 30.90
3.43
1.00
20 38.10 28.60 34.30
22 41.30 31.70 37.50
24 44.50 34.90 41.00
4.12
28 50.80 41.30 46.80
32 57.20 47.60 53.50
4.78
36 63.50 52.60 59.70
40 69.90 61.90 65.50 5.10
How to Order:
Part Numbers:
** Shell Size
Non-conductive Conductive
Front Mounted CIRSB ** RPG CIRSB ** RPGS
Rear Mounted CIRSB ** FPG CIRSB ** FPGS
Note: Conductive gaskets have a conductivity of 5m Ohms, temp range of -50 to +200˚C.
CIRSB**RPG / RPGS CIRSB**FPG / FPGS
ØB
A
4 holes ØD
T
ØB1
A
4 holes ØD
T
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
CONNECTOR FIXING NUT PLATES
GROMMET FILLER
Shell
Size AB
Max
CØ
Max DE
Max
FØ
Max
T
Thread
(Metric)
Part
Number
CIRB**NP
T
Thread
(Imperial)
Part
Number
CIRB**NPA
18 26.97 34.62 30.48
2.69/4.22
20.21
6.00
M3x0.5
18
4-40
UNC
18
20 29.36 38.48 33.53 22.47 20 20
22 31.75 40.84 36.65 23.54 22 22
24 34.93 44.83 40.00 25.90 7.50 24 24
28 39.67 51.18 46.61 29.08 28 28
32 44.45 59.10 52.75
3.50/5.00
30.68
8.00 M4x0.7
32
8-32
UNC
32
36 49.23 63.86 59.10 35.43 36 36
40 55.58 74.68 68.33 38.60 40 40
To be used if grommet is pierced incorrectly
CIRB16KFP -
CIRB12KFPF80 -
CIRB8KFPF80 -
Damage to Grommet Grommet Filler Plug Sealed using Filler Plugs
CIRB**NP
ØC
B
A
E
A
B
T Thread
Typical on 4
ØE
D
PAGE 37
RECEPTACLE MOUNTING DETAIL
Shell Size Ød3 Ød4 V ØW ØW1 X
18
3.40 4.50
38.30 26.00 31.18 27.0 0
20 41.70 30.00 34.58 29.40
22 45.20 33.00 37.78 31.80
24 3.90 48.70 36.00 41.28 34.90
28
5.50
55.50 42.00 47.08 39.70
32
4.50
62.40 48.50 53.78 44.50
36 69.00 55.00 59.98 49.20
40 75.00 59.10 66.40 55.50
Hole
centres ØJ K
48.85 35.23 33.58
52.05 38.43 36.68
55.45 41.56 39.88
58.45 44.78 43.18
65.25 51.13 49.37
71.55 57.48 55.78
77.95 63.83 62.18
85.25 70.18 68.38
Panel Mounting Details
Note: When fixed connectors are used with threaded mounting holes, refer to hole sizes in column Ød4.
Front Mounting Receptacle Rear Mounting Receptacle
ØW
V
X4 holes Ød3
(see note 1)
X
ØW1
V
X4 holes Ød3
(see note 1)
X
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
METAL PROTECTIVE CAPS
Shell
Size
B
Max
C
Max
D
Max
E1
Max
E2
Max
F1
Max
F2
Max
L
(approx)
d1
Min
d2
+0.5, -0
+0.02, -0
Om Min
Overlap
Mated
18 36.50 38.70 30.80
24.00
27.30 29.80 33.90 150.0 4.85
4.30
15.85
20 39.90 42.10 34.20
22 43.10 45.30 37.40
15.75
24 46.60 48.80 40.90
28 53.40 54.60 46.70
32 60.10 61.30 53.40
27.00 5.5036 66.30 67.50 59.60
40 72.10 73.40 65.50
CIRBE**XPCA M32 (with nylon cord) CIRBE**XPCAK M32 (with sash chain)
CIRB**EPCA M32 (with nylon cord) CIRB**EPCAK M32 (with sash chain)
PAGE 39
RFI BRAID SOCK, BANDIT STRAP
& KNITMESH BRAID
TE Connectors
Part Number Diameter Length Max
Shell Size
CIRBMBS035015 ø 20 mm 100 mm 22
CIRBMBS050015 ø 25 mm 150 mm 22
CIRBMBS020010 ø 35 mm 150 mm 32
CIRBMBS025015 ø 50 mm 150 mm 36 & 40
TE Connectors
Part Number Length Width
CIRBMKM1050 500 mm 25 mm
TE Connectors
Part Number Length Width Max
Shell Size
CIRB600052 520 mm 6.1 mm 32
CIRB600090 900 mm 6.1 mm 36 & 40
CIRB608109 362 mm 4 mm 22
CIRB600057 07 mm 3 mm 22
TE Connectors
Part Number Tool Description
CIRB600058 Standard Bandit Tool
CIRB600061 Micro Bandit Tool (3mm Band Straps)
CIRB601200 Calibration Kit
RFI Braid Sock
Knitmesh Braid
Bandit Strap
Bandit Tools
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
CRIMP CONTACTS
TE Connectors
Part Number Description Size Supplier
Part Number
CIRBFT8 Hand Crimp Tool Contact sizes
12 and 16
Supplier DMC
part no: FT8
CIRWA27F Pneumatic Crimp Tool
(to locate contacts within a crimp tool)
Contact sizes
12 and 16
Supplier DMC
part no: WA27F
CIRBTH592 Turret Locator Contact sizes
12 and 16
Supplier DMC
part no: TH592
CIRBD51 Hand Crimp Tool Contact size
100
Supplier Dubuis
part no: D51
CIRBD55E Electric Crimp Tool Contact size
100
Supplier Dubius
part no: D55E
CIRMRP0925 Die Sets Crimping contact
size 8 & 100
CIR8012ITL (size 12)
CIR8016ITL (size 16)
Insertion Tool
(to insert contact into plastic insert)
Contact sizes
12 and 16
Supplier Astro Tools part
no: AT 1110
CIR808ETA Extraction Tool
(to locate contacts within a crimp tool)
Contact size
8
CIR8012ETA (size 12)
CIR8016ETA (size 16)
Extraction Tool
(to extract from plastic insert)
Contact sizes
12 & 16
CIR8012GET (size 12)
CIR8016GET (size 16)
Grommet Extraction Tool
(to extract contact through grommet)
Contact sizes
12 & 16
TE Connectors
Part Number Description Size Supplier
Part Number
CIR6M3800644 Contact Rentention Tester
(applies a load to test contact is seated)correctly)
Supplier DMC
part no: HT250-3
CIR6M3800731 (size 12)
CIR6M3800646 (size 16) Contact Socket Retention Test Probe Contact sizes
12 & 16
Supplier DMC part no:
67-012-01/67-016-01
CIR6M3800730 (size 12)
CIR6M3800645 (size 16) Contact Pin Retention Test Probe Contact sizes
12 & 16
Supplier DMC part no:
68-012-01/68-016-01
CIR8018GAT (size 18–24)
CIR8028GAT (size 28–40)
Grommet Assembly Aid
(to tuck grommet shoulder into connector)
Shell size
18-24/28-40
CIR80 ## CAG
(size & planform ##)
Pin Contact Alignment Gauge
(checks/straightens contacts bent during assembly)
Tooling for crimp contacts
Supplementary Tooling
PAGE 41
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
NOTES
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
NOTES
PAGE 43
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
.
............................................................................................................................................................................................................................
NOTES
te.com/Rail
© 2016 TE Connectivity Ltd. family of companies. All Rights Reserved. 1-1773857-9 RAIL 2/2016
EVERY CONNECTION COUNTS, TE Connectivity, TE connectivity (logo) and TE are trademarks of the TE Connectivity group of companies andits licensors.
SNCF, RATP, Alstom, Bombardier, LUL and other product or company names mentioned herein may be trademarks of their respective owners. While TE has made every
reasonable eort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation,
warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to
the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied
warranties of merchantability or fitness for a particular purpose are expressly disclaimed.
The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the
latest dimensions and design specifications.
RAIL /// CIRP: MODULAR BAYONET LOCK CONNECTOR
For More Information
Follow us on Twitter for all the latest product news
@TEConnectivity, and on Facebook, TEConnectivity.
TE Connectivity (TE) Technical Support Center
North America +1 800 522 6752
Asia Pacific +86 0 400 820 6015
Austria +43 1 905 601 228
Baltic Regions +46 8 5072 5000
Benelux +31 73 6246 999
Czech Republic +420 800 701 462
France +33 1 34 20 86 86
Germany +49 6251 133 1999
Hungary +36 809 874 04
Italy +39 011 401 2632
Nordic +46 8 5072 5000
Poland +48 800 702 309
Russia +7495 790 790 2
Spain/Portugal +34 93 2910366
Switzerland +41 52 633 66 26
United Kingdom +44 800 267 666