89 Uncompensated
89U www.meas-spec.com November 2013
1/5
316L SS Pressure Sensor
High Pressure
0 - 100mV Output
Absolute
DESCRIPTION
The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor
packaged in a 316L stainless steel housing. The 89 uncompensated features 5/16-32 UNEF threads and can be
welded in place. It can also be packaged in a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP as
well as custom process fittings. Contact factory for threaded fitting options.
The 89 uncompensated is designed for high pressure OEM applications where compatibility with
corrosive media is required. The sensing package utilizes silicon oil to transfer pressure from the 316L stainless
steel diaphragm to the sensing element.
Please refer to the 89 compensated and constant voltage datasheets for more information on different
features of the 89.
FEATURES APPLICATIONS
Weldable and Threaded Process Fittings
Hydraulic Controls
-40ºC to +125ºC Operating
Temperature Range
Process Control
Pressure Calibrators
±0.25% Pressure Non Linearity
Refrigeration/Compressors
Solid State Reliability
STANDARD RANGES
Range
psia
0 to 01k
0 to 03k
0 to 05k
0 to 10k
89 Uncompensated
89U www.meas-spec.com November 2013
2/5
PERFORMANCE SPECIFICATIONS
Supply Current: 1.5mA
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
MAX
UNITS
NOTES
Sensitivity
15
28
mV/V@FS
Zero Pressure Output
-4
4
mV/V
Pressure Non Linearity
-0.25
0.25
%Span
1
Pressure Hysteresis
%Span
Repeatability
%Span
Input/Output Resistance
3900
5100
Ω
2
Temperature Coefficient – Resistance
1300
1750
ppm/°C
3
Temperature Coefficient – Sensitivity
-1450
-1000
ppm/°C
3
Temperature Coefficient – Offset
uV/V/ºC
3
Thermal Hysteresis – Span
%Span
3
Thermal Hysteresis – Offset
%Span
3
Long Term Stability – Span
%Span
4
Long Term Stability – Offset
%Span
4
Supply Current
0.5
2.0
mA
Supply Voltage
9.5
V
Insulation Resistance (50Vdc)
50
MΩ
5
Pressure Overload
3X
Rated
6
Pressure Burst
4X
Rated
7
Operating Temperature
-40
+125
ºC
Storage Temperature
-50
+125
ºC
Torque
154
180
In-lb
8
Weight
9
grams
Media – Pressure Port
Liquids and Gases compatible with 316/316L Stainless Steel
Notes
1. Best fit straight line between 0 and FSP.
2. Measured with both -SUP pins shorted together.
3. Over the temperature range -20°C to +85°C with respect to 25°C.
4. Long term stability over a one year period with constant current and temperature.
5. Minimum resistance between case and pins.
6. 3X or 20,000psi, whichever is less.
7. 4X or 30,000psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing
element or transducer.
8. For Model 89 w/o fittings, recommended receptacle is 316 ST STL, tensile strength 75,000psi min.
Remarks
9. Testing: All 03k, 05k and 10kpsi parts are tested at 2500psi.
89 Uncompensated
89U www.meas-spec.com November 2013
3/5
DIMENSIONS
89 Uncompensated
89U www.meas-spec.com November 2013
4/5
ACCESSORIES
89 Uncompensated
89U www.meas-spec.com November 2013
5/5
CONNECTIONS
ORDERING INFORMATION
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: pfg.cs.asia@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
89 - 01K A - 0 U
Model
Pressure Range
Type (A = Absolute)
Fitting Type
Electrical (U = Leads)